FLYLINKTECH 4-in-1 Car Jump Starter and Power Bank User Manual

1. تعارف

This manual provides instructions for the safe and effective use of your FLYLINKTECH 4-in-1 Car Jump Starter, Power Bank, Tire Inflator, and LED Light. Please read this manual thoroughly before operating the device and retain it for future reference.

The device combines four essential functions:

• Car Jump Starter: Capable of jump-starting vehicles with up to ALL Gas engines and 8.0L Diesel engines.
• پورٽبل پاور بئنڪ: 24000mAh capacity with USB and DC outputs for charging electronic devices.
• Tire Inflator: 150PSI air compressor with preset function and auto-off for inflating tires and other inflatables.
• LED لائيٽ: Features Stable, SOS, and Strobe lighting modes for emergency situations.

2. حفاظت جي ڄاڻ

ڊوائيس کي زخم يا نقصان کان بچڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:

• ڊوائيس کي انتهائي گرمي پد (60 ° C کان مٿي يا -20 ° C کان گهٽ) تي نه لڳايو.
• ڊوائيس کي جدا يا تبديل نه ڪريو.
• ٻارن جي پهچ کان پري رکو.
• صرف مهيا ڪيل سمارٽ ڪل استعمال ڪريوamps for jump-starting.
• Ensure correct polarity when connecting to a vehicle battery.
• Do not jump-start a vehicle if the device's battery level is critically low.
• Avoid prolonged use of the tire inflator to prevent overheating.
• The device features an 8-point Smart Protection System:
  • شارٽ سرڪٽ جي حفاظت
  • اعلي درجه حرارت تحفظ
  • ريورس ڪنيڪشن تحفظ
  • گھٽ درجه حرارت جي حفاظت
  • Surge Voltage تحفظ
  • وڏي ويلtage تحفظ
  • اعلي درجه حرارت تحفظ
  • اوور ڊسچارج تحفظ

3. پيڪيج مواد

مھرباني ڪري ھيٺ ڏنل شين لاءِ پيڪيج چيڪ ڪريو:

• FLYLINKTECH 4-in-1 Car Jump Starter
• سمارٽ جمپر ڪلamps
• ٽائر Inflator Hose
• Various Nozzle Adapters (3 types)
• USB چارجنگ ڪيبل (ٽائيپ-سي)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)
• Storage Case (if included with your model)

4. ڊوائيس اوورview

Familiarize yourself with the device's components and ports:

1. DC 12-16V/10A Output Port
2. USB Output Ports (USB1, USB2)
3. Type-C Input Port (for charging the device)
4. EC5 Output Port (for jumper clamps)
5. پاور بٽڻ
6. LCD پاور اشارو
7. LCD ايئر پريشر ڊسپلي
8. ON/OFF Button (for tire inflator)

5. ڊوائيس کي چارج ڪرڻ

Before first use, fully charge the device. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

1. Connect the provided USB charging cable to the Type-C Input Port (3) on the device.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or car charger.
3. The LCD Power Indicator (6) will show the charging status. The device is fully charged when the indicator shows 100%.

6. آپريٽنگ هدايتون

6.1. گاڏي شروع ڪرڻ سان ٽپو ڏيو

This device is suitable for jump-starting vehicles with up to ALL Gas engines and 8.0L Diesel engines.

1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
2. گاڏي جي اگنيشن ۽ سڀ لوازمات (لائيٽون، ريڊيو، وغيره) بند ڪريو.
3. ڳنڍيو ڳاڙهو (+) clamp of the smart jumper cable to the positive (+) terminal of the vehicle's battery.
4. ڳنڍيو ڪارو (-) clamp of the smart jumper cable to the negative (-) terminal of the vehicle's battery.
5. Insert the EC5 connector of the smart jumper cable into the EC5 Output Port (4) on the jump starter.
6. Once connected correctly, the smart clamp indicator light will turn green (refer to smart clamp manual for specific indicator meanings).
7. گاڏي جي انجن شروع ڪريو.
8. Once the vehicle starts, immediately remove the EC5 connector from the jump starter.
9. Then, disconnect the black (-) clamp گاڏي جي بيٽري مان، ان کان پوءِ ڳاڙهي (+) clamp.

CAUTION: Do not touch the red and black clamps together. Do not attempt to jump-start if the smart clamp indicator shows an error.

6.2. پورٽيبل پاور بينڪ طور استعمال ڪرڻ

24000mAh جي گنجائش توهان کي مختلف اليڪٽرانڪ ڊوائيسز کي چارج ڪرڻ جي اجازت ڏئي ٿي.

1. Connect your device's USB charging cable to one of the USB Output Ports (2) on the jump starter. The device supports 5V/2.4A and 5V/9V quick charge.
2. Alternatively, use the DC 12-16V/10A Output Port (1) for compatible devices.
3. جمپ اسٽارٽر خودڪار طريقي سان توهان جي ڊوائيس کي چارج ڪرڻ شروع ڪندو.
4. Monitor the LCD Power Indicator (6) for the remaining battery level.

6.3. ٽائر انفليٽر استعمال ڪرڻ

The 150PSI tire inflator can be used for car tires, bicycle tires, balls, and other inflatables. It features a preset function and auto-off.

1. Screw the tire inflator hose onto the air output port of the device.
2. Attach the appropriate nozzle adapter to the other end of the hose and connect it securely to the item you wish to inflate.
3. Press the Power Button (5) to turn on the device. The LCD Air Pressure Display (7) will show the current pressure.
4. Use the '+' and '-' buttons (usually near the display) to set the desired pressure.
5. Press the ON/OFF Button (8) to start inflation.
6. انفليٽر خود بخود بند ٿي ويندو جڏهن اڳوڻو پريشر پهچي ويندو.
7. Press the ON/OFF Button (8) again to manually stop inflation if needed.
8. Disconnect the hose and store the adapters.

6.4. ايل اي ڊي لائيٽ استعمال ڪرڻ

مربوط ايل اي ڊي لائيٽ مختلف حالتن لاءِ روشني فراهم ڪري ٿي.

1. Press and hold the Power Button (5) for a few seconds to turn on the LED light.
2. Press the Power Button (5) briefly to cycle through the lighting modes: Stable Light → SOS Signal → Strobe Light → Off.

7. سار سنڀال

• صفائي: ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال نه ڪريو.
• اسٽوريج: ڊوائيس کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
• بيٽري جي سنڀال: To prolong battery life, fully charge the device every 3-6 months, even when not in use. Avoid completely draining the battery for extended periods.
• لوازمات جي سنڀال: Keep jumper clamps and inflator hose clean and free from debris.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. استعمال ڪندڙ ٽوٽڪا

• Pre-charge: Always ensure the jump starter is fully charged before embarking on a long trip or storing it for emergencies.
• بيٽري جي سطح جي چڪاس: Regularly check the LCD power indicator to ensure sufficient charge for jump-starting or inflating.
• مناسب ڪنيڪشن: Double-check the polarity when connecting the smart clamps to avoid damage to the device or vehicle. The smart clamps are designed to prevent errors, but visual confirmation is always best.
• Inflator Cooling: For prolonged inflation tasks, allow the device to cool down periodically to prevent overheating and ensure longevity.
• اسٽوريج جي درجه حرارت: Store the device within the recommended temperature range to preserve battery health and overall performance.

11. وارنٽي ۽ سپورٽ

For product support, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

ٺاهيندڙ / برانڊ: FLYLINKTECH

وڪرو ڪندڙ: UTRAI Flagship Store