ڊارڪ فليش DS900 ARGB مڊ ٽاور پي سي ڪيس يوزر مينوئل

1. تعارف

The DARK Flash DS900 ARGB is a high-performance Mid Tower PC case designed for enthusiasts seeking excellent airflow, spacious component support, and vibrant addressable RGB lighting. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DS900 PC case.

2. پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته سڀئي جزا پيڪيج ۾ موجود آھن:

• DARK Flash DS900 ARGB PC Case
• Accessory Box (screws, standoffs, cable ties, user manual)

3. سيٽ اپ ۽ تنصيب

Follow these steps to install your PC components into the DS900 case.

3.1 ڪيس جي تياري

1. ڪيس کوليو: Carefully remove the DS900 from its packaging.
2. پاسي واري پينل کي هٽايو: The tempered glass side panel is typically secured with thumbscrews or a latch mechanism. Remove it to access the interior. The steel side panel on the opposite side should also be removed for cable management.

3.2 اجزاء جي انسٽاليشن

1. Motherboard لڳائڻ:
   • ڪيس جي پوئين اوپننگ ۾ I/O شيلڊ نصب ڪريو.
   • Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure all screw holes align.
   • مهيا ڪيل اسڪرو سان مدر بورڊ کي محفوظ ڪريو.
2. پاور سپلائي يونٽ (PSU) تنصيب:
   • The DS900 supports ATX PSUs up to 200mm in length.
   • Install the PSU into its dedicated compartment at the bottom rear of the case, typically from the rear.
   • Secure the PSU with screws.
3. اسٽوريج ڊرائيو جي انسٽاليشن:
   • The case supports 2x 3.5" HDDs and 2x 2.5" SSDs.
   • Locate the drive cages/mounts. For 3.5" HDDs, slide them into the drive cage and secure with screws. For 2.5" SSDs, mount them to the designated trays or locations.
4. گرافڪس ڪارڊ (GPU) جي انسٽاليشن:
   • The DS900 supports GPUs up to 400mm in length.
   • ڪيس جي پوئين پاسي کان ضروري PCIe سلاٽ ڪَوَر هٽايو.
   • Insert your graphics card into the appropriate PCIe slot on the motherboard and secure it with a screw or latch.
5. Cooling System Installation (Fans/Radiators):
   • The case offers extensive cooling support:
     • Front: 3x 120mm/140mm fans or 240/280/360mm radiator
     • Top: 3x 120mm/140mm fans or 240/280/360mm radiator
     • پوئين پاسي: 1x 120 ايم ايم فين
     • Bottom: 2x 120mm fans
   • Install your chosen fans or radiators in their respective locations, securing them with screws.
   • Ensure proper airflow direction (intake/exhaust).

3.3 Cable Management and Front I/O Connections

1. ڪيبل جو انتظام: ڪيبلز کي منظم ۽ محفوظ ڪرڻ لاءِ مدر بورڊ ٽري جي پويان ڪيبل روٽنگ ڪٽ آئوٽ ۽ ٽائي ڊائون پوائنٽس استعمال ڪريو. هي هوا جي وهڪري ۽ جمالياتيات کي بهتر بڻائي ٿو.
2. Front I/O Connections: Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

3.4 فائنل اسيمبلي

1. Once all components are installed and cables are managed, reattach the steel side panel and then the tempered glass side panel.
2. پڪ ڪريو ته سڀئي اسڪرو محفوظ طور تي سخت آهن.

4. آپريٽنگ هدايتون

4.1 پاور آن

Press the power button located on the front I/O panel to turn on your computer.

4.2 ARGB لائيٽنگ ڪنٽرول

The DS900 supports Addressable RGB (ARGB) lighting. If your motherboard has a 5V 3-pin ARGB header, you can connect the case's ARGB cables to it and control the lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). If your motherboard does not have an ARGB header, an external ARGB controller (not included) may be required for lighting control.

4.3 Front I/O Ports

سامهون وارو I/O پينل آسان رسائي فراهم ڪري ٿو:

• 1x USB 3.0 پورٽ
• 2x USB 2.0 بندرگاهن
• HD Audio (headphone and microphone jacks)
• پاور بٽڻ
• ري سيٽ بٽڻ

5. سار سنڀال

باقاعده سار سنڀال توهان جي پي سي جي اجزاء جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائڻ ۾ مدد ڪري ٿي.

5.1 ڊسٽ فلٽر

The DS900 is equipped with removable dust filters on the top and bottom. Periodically remove and clean these filters to prevent dust buildup inside the case, which can hinder airflow and component cooling.

• Gently slide out the filters.
• Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).

5.2 Tempered Glass Panels

Clean the tempered glass panels with a microfiber cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or coatings.

5.3 اندروني صفائي

Occasionally, use compressed air to blow out dust from inside the case, especially around fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

6. مسئلا حل ڪرڻ

هتي ڪجھ عام مسئلا ۽ امڪاني حل آهن:

• PC does not power on:
  • چيڪ ڪريو ته PSU وال آئوٽليٽ سان صحيح طرح سان ڳنڍيل آهي ۽ آن ڪيو ويو آهي.
  • Ensure all power cables (24-pin ATX, 8-pin CPU, PCIe power) are securely connected to the motherboard and components.
  • Verify the front panel power switch cable is correctly connected to the motherboard header.
• پنکھا نه ڦري رهيا آهن:
  • Check if fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Ensure the PSU is providing power.
• ARGB lighting is not working:
  • Verify the ARGB cable is correctly connected to a 5V 3-pin ARGB header on your motherboard (not a 12V 4-pin RGB header).
  • Ensure your motherboard's RGB software is installed and configured correctly.
  • If using an external controller, check its power and connections.
• USB ports not functioning:
  • Check if the front panel USB 3.0 and USB 2.0 cables are correctly connected to their respective headers on the motherboard.

7. وضاحتون

8. استعمال ڪندڙ ٽوٽڪا

• هوا جي وهڪري کي بهتر بڻايو: With support for multiple fans, consider a balanced intake and exhaust fan configuration for optimal cooling performance. Typically, front and bottom fans as intake, and top and rear fans as exhaust.
• ڪيبل جو انتظام: Take your time with cable management behind the motherboard tray. This not only improves aesthetics but also prevents cables from obstructing airflow.
• ARGB Sync: If your motherboard supports ARGB sync, connect the case's ARGB cables to the motherboard's 5V 3-pin header to synchronize lighting effects across your system.
• مٽي فلٽر جي صفائي: Regularly clean the magnetic dust filters to maintain good airflow and keep the interior dust-free.

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. You can also visit the official darkFlash website for more resources:

www.darkflash.com