1. تعارف
This manual provides essential information for the safe and effective operation, assembly, and maintenance of your ONEVAN F30G Electric Nail Gun. Please read all instructions carefully before use to ensure proper handling and to prevent injury or damage to the tool.
2. وضاحتون
The ONEVAN F30G Electric Nail Gun is a versatile tool designed for various fastening applications, including wood inlaying and furniture manufacturing. It features a brushless motor for high efficiency and durability.
| ماڊل | F30G | 422 جي | 1022 جي |
|---|---|---|---|
| ناخن جي ماپ | 10mm-30mm | 10mm-20mm | 10mm-20mm |
| نيل ميگزين جي گنجائش | 100 پي سي | ||
| درجه بندي جلدtage | ڊي سي 18 وي | ||
| خالص وزن | 2.4 ڪلو | ||
| طاقت جو ذريعو | بجلي | ||
| قسم | نيل گن ختم ڪريو | ||
| استعمال ڪريو | گھر جي DIY | ||
| بيٽري شامل | No (unless specified in package) | ||
| اعليٰ ڳڻتي وارو ڪيميڪل | ڪو به | ||
| سرٽيفڪيشن | CE | ||
| وائبريشن جي سطح | 2.5m/s² or less | ||
| آواز جي دٻاء جي سطح | 81dB(A) | ||
| آواز جي طاقت | 92dB(A) | ||
| Battery capacity (588VF) | 22900mah/block | ||
Note: Specifications are subject to change without notice due to continuous research and development. Actual specifications and battery cartridges may vary by region.
3. Product Structure and Components
Familiarize yourself with the different parts of your nail gun for safe and efficient operation.
- Alloy steel gun mouth: The durable tip where nails are ejected.
- Aluminum alloy box: Houses the nail magazine.
- Springs buckle: Secures the nail magazine.
- ليتيم بيٽري: Provides power to the cordless tool.
- Security lock: حادثاتي فائرنگ کي روڪي ٿو.
- سوئچ: اوزار کي چالو ڪري ٿو.
- Anti-slip handle: آرامده ۽ محفوظ گرفت لاءِ ايرگونوميڪل طور تي ٺهيل.
- ڪنٽرول پينل: Displays battery status and allows mode selection.
4. حفاظتي ڊيڄاريندڙ
خبردار: هن پاور ٽول سان مهيا ڪيل سڀ حفاظتي ڊيڄاريندڙ، هدايتون، عڪس ۽ وضاحتون پڙهو. هيٺ ڏنل فهرستن جي سڀني هدايتن تي عمل ڪرڻ ۾ ناڪامي ٿي سگھي ٿي برقي جھٽڪو، باهه ۽/يا سنگين زخمي. محفوظ ڪريو سڀ ڊيڄاريندڙ ۽ هدايتون مستقبل جي حوالي لاءِ.
4.1. جنرل پاور ٽول حفاظتي ڊيڄاريندڙ
- ڪم واري علائقي جي حفاظت: Keep work area clean and well lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away.
- برقي حفاظت: Power tool plugs must match the outlet. Avoid body contact with earthed surfaces. Do not expose power tools to rain or wet conditions. Do not abuse the cord. When operating outdoors, use an extension cord suitable for outdoor use. If operating in damp locations, use a residual current device (RCD) protected supply.
- ذاتي حفاظت: Stay alert, use common sense. Wear eye protection. Prevent unintentional starting. Remove adjusting keys/wrenches before turning on. Do not overreach. Dress properly. Use dust extraction/collection facilities if provided.
- پاور اوزار استعمال ۽ سنڀال: Do not force the power tool. Do not use if the switch does not turn it on and off. Disconnect power before adjustments or storing. Store idle tools out of reach of children. Maintain tools and accessories. Use the correct accessories for the work.
4.2. بيٽري جو اوزار استعمال ۽ سنڀال
- ري چارج صرف ٺاهيندڙ طرفان بيان ڪيل چارجر سان.
- پاور اوزار استعمال ڪريو صرف خاص طور تي نامزد ٿيل بيٽري پيڪ سان.
- When battery pack is not in use, keep it away from other metal objects that could short the terminals.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact occurs, flush with water and seek medical help.
4.3. Cordless Nailer Specific Safety Warnings
- هميشه فرض ڪريو ته اوزار ۾ فاسٽنرز شامل آهن.
- اوزار کي پنهنجي طرف يا ويجھي ڪنهن ڏانهن اشارو نه ڪريو.
- Do not actuate the tool unless it is placed firmly against the workpiece.
- Disconnect the tool from the power source when a fastener jams.
- Use caution when removing a jammed fastener.
- هن نيلر کي برقي ڪيبل کي تيز ڪرڻ لاء استعمال نه ڪريو.
- هٿن ۽ پيرن کي ايجڪشن پورٽ ايريا کان پري رکو.
- Always remove the battery cartridge before loading fasteners, adjustment, inspection, maintenance, or after operation.
- پڪ ڪريو ته آپريشن کان اڳ ڪو به ويجهو نه آهي.
- Watch your footing and maintain your balance with the tool.
- Never use fastener driving tools marked with the symbol "Do not use on scaffoldings, ladders" for specific applications.
- Check walls, ceilings, floors, roofing for electrical shock, gas leakage, explosions.
- صرف هن دستور ۾ بيان ڪيل فاسٽنرز استعمال ڪريو.
- نه ڪريوamper اوزار سان يا ان کي استعمال ڪرڻ جي ڪوشش کان سواء ڊرائيونگ fasteners.
- Do not operate the tool without fasteners.
- Stop driving operations immediately if you notice something wrong.
- ڪنهن به مواد ۾ ڪڏهن به جڪڙ نه ڪريو جيڪو فاسٽنر کي پنڪچر ڪرڻ ۽ پروجيڪٽ جي طور تي اڏڻ جي اجازت ڏئي سگهي ٿو.
- Never actuate the switch trigger and Switch button at the same time until you are prepared to fasten workpieces.
- جڏهن استعمال ۾ نه هجي ته اوزار مان هميشه فاسٽنرز کي هٽايو.
4.4. Important Safety Instructions for Battery Cartridge
- Before using, read all instructions and cautionary markings on the battery charger, battery, and product using battery.
- بيٽري ڪارٽريج کي جدا نه ڪريو.
- If operating time becomes excessively shorter, stop operating immediately.
- If electrolyte gets into your eyes, rinse with clear water and seek medical attention.
- Do not short the battery cartridge by touching terminals with conductive material, storing with other metal objects, or exposing to water/rain.
- اوزار ۽ بيٽري ڪارٽريج کي انهن هنڌن تي ذخيرو نه ڪريو جتي گرمي پد 50 °C (122 °F) تائين پهچي يا ان کان وڌيڪ هجي.
- بيٽري ڪارٽريج کي نه ساڙيو.
- بيٽري کي نه ڇڏڻ يا هڙتال ڪرڻ لاء محتاط رکو.
- خراب ٿيل بيٽري استعمال نه ڪريو.
- For commercial transports of lithium-ion batteries, observe special requirements on packaging and labeling.
- Follow local regulations relating to disposal of battery.
- If the tool has not been used for a long time, the battery must be removed.
5. اسيمبلي
5.1. Loading or Unloading Nails
CAUTION: Always make sure that your fingers are not placed on the switch trigger or the contact element and the battery cartridge is removed before carrying out any work on the nailer, especially when loading or unloading nails.
CAUTION: Load nails in the correct direction. Loading in the wrong direction may cause premature wear and tear of the driver and damage of the other parts.
CAUTION: Do not use deformed nail strips. Use nails specified in this manual. Using nails other than those specified may cause nail jamming and breakage of the nailer.
- لاڪ ليور کي دٻايو ۽ ميگزين جي سلائيڊ دروازي کي کوليو.
- Set a nail strip so that the nail tips touch the bottom of the magazine and slide the nail strip toward the firing opening.
- سلائڊ دروازي کي اصل پوزيشن ڏانھن واپس آڻيو جيستائين تالا ليور ان کي لاڪ ڪري.
ناخن کي هٽائڻ لاء، تالا ليور کي دٻايو ۽ سلائڊ دروازو سلائڊ ڪريو. رسالي مان ناخن ڪڍيائين.
6. آپريشن
خبردار: رابطي واري عنصر کي مواد تي مضبوطيءَ سان رکڻ لاءِ جاري رکو جيستائين نيل مڪمل طور تي نه هليو وڃي. اڻڄاتل فائرنگ ذاتي زخمي ٿي سگھي ٿي.
6.1. Driving Nails - Single Short Mode
- Press and hold the switch button for 1 second to activate the tool and enter single-drive mode (default).
- ٽريگر تالا جاري ڪريو.
- Align the tool head vertically to the target position.
- Fully pull the trigger to shoot the nail.
- To drive the next nail, release your finger from the switch trigger once, and then repeat steps 3 and 4.
6.2. Driving Nails - Continuous Short Mode
- In single-drive mode, press the switch button to enter continuous-drive mode.
- In continuous-drive mode, the tool can continuously drive up to 100 nails per minute by pulling the trigger.
جيڪڏهن نيل جو مٿو ورڪ پيس جي مٿاڇري کان مٿانهون رهي ٿو، نيلر جي سر کي مضبوطيءَ سان ورڪ پيس جي خلاف رکندي نيل کي ڊرائيو ڪريو.
NOTE: If the head of the nail still remains above the workpiece even when holding the nail head, the material may not be suitable for the nailer. Continuing to use the nailer on such material may result in damage to the driver or nailer jamming.
6.3. Shutdown the Nailer
- Press and hold the switch button for 1 second to turn off the tool in any working mode after use.
7. سار سنڀال
7.1. Tips for Maintaining Maximum Battery Life
- Charge the battery cartridge before it is completely discharged. Stop operation and charge when you notice less tool power.
- Never recharge a fully charged battery cartridge. Overcharging shortens battery service life.
- Charge the battery cartridge at room temperature (10 °C - 40 °C / 50 °F - 104 °F). Let a hot battery cartridge cool down before charging.
- بيٽري ڪارٽريج کي چارج ڪريو جيڪڏهن توهان ان کي ڊگهي عرصي تائين استعمال نه ڪيو (ڇهن مهينن کان وڌيڪ).
7.2. Tool / Battery Protection System
The tool is equipped with a tool/battery protection system that automatically cuts off power to the motor to extend tool and battery life under certain conditions:
- اوور لوڊ تحفظ: If the tool/battery draws abnormally high current, it stops automatically. Turn off the tool, stop the application, then turn it on to restart.
- گهڻي گرمي کان بچاءُ: If the tool/battery overheats, it stops automatically. Let it cool down before turning it on again.
- اوور ڊسچارج تحفظ: If the battery capacity is not enough, the tool stops automatically. Remove the battery and charge it.
8. مسئلا حل ڪرڻ
This section addresses common issues you might encounter with your ONEVAN F30G Electric Nail Gun. For more complex problems, please refer to the warranty and support section.
- Tool stops unexpectedly during operation: This is likely due to the tool/battery protection system. Check for:
- اوور لوڊ: Turn off the tool, remove the cause of overload (e.g., trying to nail into overly hard material), and restart.
- وڌيڪ گرم: Allow the tool and battery to cool down before restarting.
- Overdischarge: Remove the battery and charge it fully.
- Nails not driving completely or jamming:
- Ensure the tool head is firmly pressed against the workpiece.
- Verify that the nails are loaded in the correct direction and are not deformed.
- Check if the material is suitable for the nailer; some materials may be too hard.
- پڪ ڪريو ته بيٽري ڪافي چارج ٿيل آهي.
- اوزار چالو نٿو ٿئي:
- چيڪ ڪريو ته بيٽري صحيح طرح سان داخل ڪئي وئي آهي ۽ چارج ڪئي وئي آهي.
- Ensure the switch button is pressed and held for at least 1 second.
- Verify that the trigger lock is released.
9. استعمال ڪندڙ ٽوٽڪا
- For repetitive tasks, utilize the continuous short mode to increase efficiency.
- Always keep a spare charged battery on hand for uninterrupted work, especially on larger projects.
- Regularly clean the nail magazine and gun mouth to prevent nail jams and ensure smooth operation.
- When working on delicate surfaces, test the nail depth on a scrap piece of material first to avoid damage.
10. وارنٽي ۽ سپورٽ
وارنٽي جي معلومات، ٽيڪنيڪل سپورٽ، يا سروس جي پڇا ڳاڇا لاءِ، مھرباني ڪري پنھنجي پرچون ڪندڙ يا ٺاھيندڙ سان سڌو رابطو ڪريو. خريداري جي ثبوت طور پنھنجي خريداري جي رسيد رکو.
هڪ استعمال ڪندڙ دستياب PDF فارميٽ ۾ ڊائون لوڊ لاءِ موجود آهي: يوزر مينوئل (PDF)
