تعارف
هي دستور العمل توهان جي Banggood LV-WR02ES وائرليس وائي فائي سگنل کي ترتيب ڏيڻ، هلائڻ ۽ برقرار رکڻ لاءِ جامع هدايتون مهيا ڪري ٿو. Amplifier. This device is designed to extend your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide stable internet access for various devices. Please read this manual carefully before use to ensure optimal performance and safe operation.
دٻي ۾ ڇا آهي
مھرباني ڪري تصديق ڪريو ته سڀ شيون توھان جي پيڪيج ۾ موجود آھن:
- 1 x Wireless WiFi Signal Amplifier (Repeater)
- 1 x Power Specification Plug (e.g., EU, US, UK, AU depending on selection)
- 1 x RJ45 Network Cable
- 1 x User Manual (Quick Installation Guide)
شڪل 1: پيڪيج مواد
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل | LV-WR02ES (also known as LV-WR02M/LV-WR02EM) |
| وائرلیس معياري | Wireless N (802.11n) |
| ڊيٽا جي شرح | 300Mbps تائين |
| فريکوئنسي بينڊ | 2.4GHz |
| آپريٽنگ موڊس | Router, AP, Client, Repeater, WISP |
| سيڪيورٽي | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption, WPS support |
| بندرگاهن | 1 x WAN port, 1 x LAN port |
| اينٽينا | ٻٽي ٻاهرين اينٽينا |
| سرٽيفڪيشن | CE |
| طول و عرض (تقريبن) | 6.3cm (W) x 9.8cm (H) x 3.9cm (D) (excluding plug and antennas) |
شڪل 2: پيداوار جا طول و عرض
سيٽ اپ گائيڊ
Follow these steps for initial setup of your WiFi Signal Ampزنده:
- ڊوائيس کوليو: Carefully remove the repeater and all accessories from the packaging.
- پاور آن: Plug the repeater into a standard electrical outlet. Ensure it is placed in a location where it can receive a good signal from your existing router and also provide coverage to the desired area.
- شروعاتي ڪنيڪشن:
- وائرليس سيٽ اپ: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "Wireless-N" or similar (check the device label for the default SSID).
- Wired Setup (Optional): Connect one end of the provided RJ45 network cable to the LAN port of the repeater and the other end to your computer's Ethernet port.
- سيٽ اپ مددگار تائين رسائي: کوليو a web browser (e.g., Chrome, Firefox) and enter the default IP address (usually 192.168.1.254 or 192.168.1.1) or the default web address (check the user manual or device label) into the address bar.
- لاگ ان: Enter the default username and password (commonly "admin" for both, check device label or quick installation guide).
- Configure Operating Mode: The setup wizard will guide you through selecting your desired operating mode (e.g., Repeater Mode to extend existing Wi-Fi). Follow the on-screen instructions to complete the configuration. This typically involves selecting your existing Wi-Fi network and entering its password.
- جڳھ جي اصلاح: After initial setup, experiment with the repeater's placement to find the optimal spot for signal strength and coverage. The LED indicators on the device can often help determine signal quality.
Figure 3: WAN and LAN Ports
آپريٽنگ موڊس
The LV-WR02ES supports five distinct operating modes to suit various networking needs:
- 1. Wireless Routing Mode (Default):
Creates an instant private wireless network and enables internet sharing for multiple Wi-Fi devices. Ideal for new network setups in homes or small offices, or in hotel rooms where only a wired internet connection is available.
- 2. Repeater Mode:
Expands the coverage of an existing Wi-Fi network by receiving the wireless signal and re-transmitting it. This mode is used to improve signal strength and eliminate dead zones in larger areas.
- 3. Access Point (AP) Mode:
Transforms a wired network connection into a wireless network. Connect the repeater to a wired router or switch via an Ethernet cable, and it will broadcast a new Wi-Fi signal, allowing wireless devices to connect.
- 4. WISP Client Router Mode:
Allows simultaneous wireless ISP access and sharing. In this mode, the device connects wirelessly to an ISP access point (WISP) and then shares that internet connection with other devices, either wirelessly or via its LAN port.
- 5. Client Mode (TV/Gaming Console):
Enables wired-only devices (like smart TVs, gaming consoles, or desktop PCs) to access an existing Wi-Fi network. The repeater connects wirelessly to your main Wi-Fi network and provides an Ethernet port for the wired device.
سار سنڀال
To ensure the longevity and optimal performance of your device, consider the following maintenance tips:
- صفائي: نرم، سڪل ڪپڙي سان ڊوائيس کي نرميءَ سان صاف ڪريو. مائع صاف ڪندڙ يا ايروسول استعمال نه ڪريو.
- لڳائڻ: Avoid placing the device in direct sunlight, near heat sources, or in excessively humid environments. Ensure adequate ventilation around the device.
- فرم ويئر اپڊيٽس: وقتي طور تي ٺاهيندڙ جي چيڪ ڪريو website for firmware updates. Keeping the firmware updated can improve performance, security, and add new features.
- پاور سائيڪل: If the device experiences issues, try power cycling it (unplug from the outlet, wait 10 seconds, then plug back in).
مشڪلاتون
If you encounter problems with your WiFi Signal Amplifier, refer to the following common issues and solutions:
| مسئلو | ممڪن حل |
|---|---|
| No power/LEDs off | Ensure the device is securely plugged into a working electrical outlet. Try a different outlet. |
| Cannot connect to the repeater's Wi-Fi | Verify you are selecting the correct SSID. Check the default password on the device label. If you changed the password, try resetting the device to factory defaults (usually via a small reset button). |
| Repeater connected, but no internet access |
|
| Slow internet speed or frequent disconnections |
|
| Forgot login password for setup page | Perform a factory reset. Locate the reset button (often a small pinhole) on the device, press and hold it for 5-10 seconds until the LEDs flash, then release. The device will revert to default settings. |
استعمال ڪندڙن جون صلاحون
- بهترين جڳهه: For best results in Repeater Mode, place the device roughly halfway between your main router and the area where you need extended Wi-Fi. Avoid placing it in corners or behind large furniture.
- سگنل جي طاقت جا اشارا: Pay attention to the LED indicators on the device. They often provide visual feedback on the signal strength received from your main router, helping you find the best location.
- سيڪيورٽي: Always use WPA2-PSK encryption for your Wi-Fi networks to ensure the highest level of security. Change default passwords immediately after setup.
- WPS بٽڻ: If your main router supports WPS, you can use the WPS button on both devices for a quick and easy setup in Repeater Mode, avoiding manual configuration.
وارنٽي ۽ سپورٽ
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
