تعارف
Thank you for choosing the Antec FLUX SE MESH BTF Mid Tower Case. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new PC case. Please read this manual carefully before beginning your build to ensure proper installation and optimal performance.
سيٽ اپ ۽ تنصيب
Before starting, ensure you have all necessary components and tools. Always handle components with care and consider using an anti-static wrist strap.
1. ڪيس جي تياري
- پاسي واري پينل کي هٽايو: Carefully remove the tempered glass side panel and the steel side panel by unscrewing the thumbscrews at the rear of the case.
- Access Front Panel: The front mesh panel can be detached for easier access to front fan mounts and dust filter cleaning.
- اجزاء جي سڃاڻپ: Familiarize yourself with the internal layout, including motherboard tray, drive bays, and fan mounts.
2. Motherboard لڳائڻ
- Install the CPU, CPU cooler (if air cooler), and RAM onto your motherboard before placing it in the case.
- Align the motherboard with the standoffs in the case. The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
- مهيا ڪيل اسڪرو سان مدر بورڊ کي محفوظ ڪريو.
3. پاور سپلاءِ يونٽ (PSU) جي انسٽاليشن
- Mount your ATX power supply into the PSU shroud area at the bottom rear of the case.
- ڪيس جي پوئين پاسي کان اسڪرو سان PSU کي محفوظ ڪريو.
4. اسٽوريج ڊرائيو جي انسٽاليشن
- 3.5 انچ هارڊ ڊرائيو: Install 3.5" hard drives into the dedicated drive cage located under the PSU shroud.
- 2.5 انچ ايس ايس ڊي: Mount 2.5" SSDs to the dedicated brackets behind the motherboard tray or on top of the PSU shroud.
5. گرافڪس ڪارڊ (GPU) جي انسٽاليشن
- ڪيس جي پوئين پاسي کان ضروري ايڪسپينشن سلاٽ ڪَورز هٽايو.
- Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.
6. فين ۽ ريڊيٽر جي انسٽاليشن
The case offers extensive cooling options:
- سامهون: Supports up to 3 x 120mm or 2 x 140mm fans, or radiators up to 360mm.
- مٿي: Supports up to 2 x 120mm or 2 x 140mm fans, or radiators up to 280mm.
- پوئتي: Supports 1 x 120mm fan or 120mm radiator.
- PSU ڪفن: 2 x 120mm پرستارن کي سپورٽ ڪري ٿو.
7. ڪيبل جو انتظام
Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.
8. Connecting Front I/O
Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.
Operating Your PC Case
Once all components are installed and cables are connected, replace the side panels. Power on your system using the power button on the front I/O panel. The mesh design ensures optimal airflow for cooling your components.
سامهون I/O بندرگاهن:
- پاور بٽڻ: سسٽم کي آن/آف ڪرڻ لاءِ.
- ري سيٽ بٽڻ: سسٽم کي ٻيهر شروع ڪرڻ لاء.
- USB 3.0 بندرگاهن: تيز رفتار ڊيٽا جي منتقلي لاءِ.
- USB 2.0 پورٽ: معياري USB ڊوائيسز لاءِ.
- ايڇ ڊي آڊيو جيڪس: هيڊفون ۽ مائڪروفون لاءِ.
سار سنڀال
باقاعده سار سنڀال توهان جي پي سي جي اجزاء جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائڻ ۾ مدد ڪري ٿي.
- مٽي فلٽر: The case features removable dust filters on the front, top, and bottom (PSU intake). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
- اندروني صفائي: Periodically use compressed air to clear dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
- ٻاهرين صفائي: ٻاھرين سطحن کي نرم سان صاف ڪريو، ڊيamp ڪپڙو. سخت ڪيميڪلز کان پاسو ڪريو جيڪي ختم کي نقصان پهچائي سگهن ٿا.
مشڪلاتون
جيڪڏهن توهان کي مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلا حل ڪرڻ واري قدمن تي غور ڪريو:
- طاقت ناهي: پڪ ڪريو ته PSU آن آهي، سڀئي پاور ڪيبل (24-پن، 8-پن CPU، GPU PCIe) محفوظ طور تي ڳنڍيل آهن، ۽ فرنٽ پينل پاور سوئچ ڪيبل صحيح طرح سان مدر بورڊ سان ڳنڍيل آهي.
- پنکھا نه ڦرڻ: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
- سامهون وارو I/O ڪم نه ڪري رهيو آهي: Verify that all front panel cables (USB, Audio) are correctly connected to the motherboard headers.
- گهڻو گرم ٿيڻ: Ensure proper fan configuration (intake/exhaust), clean dust filters, and check CPU cooler/GPU heatsink mounting.
وضاحتون
The Antec FLUX SE MESH BTF Mid Tower Case offers robust features for PC builders:
| خاصيت | تفصيل |
|---|---|
| ڪيس جو قسم | مائي ٽاور |
| فارم فيڪٽر | اي ٽي ايڪس |
| Motherboard سپورٽ | ATX، Micro-ATX، Mini-ITX |
| ڊرائيو بيز | 2 x 3.5" HDD (convertible with 2.5" SSD), 2 x 2.5" SSD |
| توسيع سلاٽ | 7 |
| اڳيان I / O بندرگاھ | 2 x USB 3.0, 1 x USB 2.0, HD Audio (Mic/Headphone), Power, Reset |
| فين سپورٽ (اڳيون) | 3 x 120mm يا 2 x 140mm |
| فين سپورٽ (مٿي) | 2 x 120mm يا 2 x 140mm |
| فين سپورٽ (پوئتي) | 1 x 120mm |
| فين سپورٽ (PSU ڪفن) | 2 x 120mm |
| ريڊيٽر سپورٽ (اڳيون) | 120 / 140 / 240 / 280 / 360mm |
| ريڊيٽر سپورٽ (مٿي) | 120/140/240/280mm |
| ريڊيٽر سپورٽ (پوئتي) | 120mm |
| وڌ ۾ وڌ GPU ڊگھائي | 330mm تائين |
| وڌ ۾ وڌ CPU کولر جي اوچائي | 160mm تائين |
| وڌ ۾ وڌ PSU ڊگھائي | 180mm تائين |
| مٽي فلٽر | Front, Top, Bottom (PSU) |
| RGB سپورٽ | آر بي جي ناهي |
وارنٽي ۽ سپورٽ
وارنٽي جي معلومات ۽ ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري سرڪاري اينٽيڪ جو حوالو ڏيو webسائيٽ تي وڃو يا پنهنجي پرچون ڪندڙ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
استعمال ڪندڙن جون صلاحون
- ڪيبل جو انتظام: Take your time with cable management. A tidy interior not only looks better but also improves airflow and makes future upgrades easier.
- پرستار جي رخ: Ensure your fans are oriented correctly for optimal airflow. Typically, front and bottom fans should be intake, while rear and top fans should be exhaust.
- مٽي فلٽر جي صفائي: Make cleaning dust filters a routine task (e.g., once a month) to maintain good airflow and prevent dust buildup inside your PC.
- اجزاء مطابقت: Always double-check the dimensions of your CPU cooler, GPU, and PSU against the case's maximum clearance specifications before purchasing.
