CYCPLUS M3 GPS سائيڪل ڪمپيوٽر يوزر مينوئل

1. سيٽ اپ

1.1 پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

Image: Contents of the CYCPLUS M3 package, including the computer, cables, and mounting accessories.

• GPS Bike Computer (M3)
• قسم-سي چارجنگ ڪيبل
• ھدايت وارو دستور
• Rubber Band x3
• سائيڪل ڪمپيوٽر جبل
• ربر پيڊ

1.2 تنصيب

Follow these steps to install the CYCPLUS M3 on your bicycle:

Image: Diagram illustrating the installation of the bike computer mount using rubber bands.

1. Using the included rubber bands, securely attach the base to your bicycle's handlebar or stem by crossing the bands diagonally.
2. Fix the M3 computer onto the installed base by twisting it until it locks into place.
3. An optional CYCPLUS bike computer mount (sold separately) can also be used for installation.

1.3 Initial App Connection

For quick setup and enhanced features, connect your M3 to the CYCPLUS Fit App:

Image: Screenshot of the CYCPLUS Fit app showing data analysis, sync to Strava, and firmware update options.

• ڊائون لوڊ ڪريو CYCPLUS Fit APP from Google Play or the App Store.
• Open the app and follow the on-screen instructions to connect and configure your M3 device via Bluetooth (BLE 5.0).
• Once connected, you can download Ephemeris data through the app to speed up GPS positioning. Note that Ephemeris data is typically valid for 6 hours.

2. آپريٽنگ هدايتون

2.1 بٽڻ جا ڪم

The CYCPLUS M3 features three buttons: L, R1, and R2. Their functions vary depending on whether you are in normal use or settings mode.

2.2 Settings Menu Navigation

For quick setup, it is recommended to use the CYCPLUS Fit APP. Alternatively, you can use the device buttons:

• سيٽنگون داخل ڪريو: ڊگھو دٻايو R1 بٽڻ
• Navigate Settings Pages: مختصر دٻايو R1 button to cycle through the 8 setting pages (C1-C8).

2.3 ANT+ Sensors Connection (C2)

The M3 supports ANT+ sensors for speed, heart rate, power, and cadence.

• From the settings menu, navigate to the C2 صفحو.
• کي دٻايو L button to start searching for ANT+ sensors.
• The device will check for speed, heart rate, power, and cadence sensors.
• If a sensor is detected, its data will be displayed. If no sensor is found, a horizontal line will appear in its place.
• The device will return to the home page automatically after 10 seconds.

2.4 Unpairing Sensors (C9)

To unpair all connected sensors:

• ڏانهن وڃو C9 page in the settings menu.
• کي دٻايو L button to unpair all currently connected sensors.

2.5 Wheel Circumference Setting (C3)

Set the wheel circumference for accurate speed and distance tracking:

1. ڏانهن وڃو C3 page in the settings menu.
2. کي دٻايو L button to start the setting process. The adjustable digit will flash.
3. کي دٻايو R1 button to adjust the value of the flashing digit.
4. کي دٻايو R2 button to switch between digits.
5. Once the desired circumference is set, press the L سيٽنگ جي تصديق ۽ محفوظ ڪرڻ لاءِ بٽڻ دٻايو.
6. ڊگهو پريس R1 گھر جي صفحي ڏانھن واپس وڃڻ لاء.

2.6 Time Zone Setting (C4)

Adjust the time zone for correct time display:

1. ڏانهن وڃو C4 page in the settings menu.
2. کي دٻايو L button to start the setting process. The adjustable digit will flash.
3. کي دٻايو R1 button to adjust the time zone value.
4. کي دٻايو R2 button to switch to the minute digits, then press R1 ان کي ترتيب ڏيڻ لاء.
5. Once the time zone is set, press the L سيٽنگ جي تصديق ۽ محفوظ ڪرڻ لاءِ بٽڻ دٻايو.
6. ڊگهو پريس R1 گھر جي صفحي ڏانھن واپس وڃڻ لاء.

2.7 Speed Unit Setting (C5)

Switch between Kilometers per Hour (KMH) and Miles per Hour (MPH):

1. ڏانهن وڃو C5 page in the settings menu.
2. کي دٻايو L button to start the setting process.
3. کي دٻايو R1 button to switch between KMH and MPH.
4. کي دٻايو L سيٽنگ جي تصديق ۽ محفوظ ڪرڻ لاءِ بٽڻ دٻايو.
5. ڊگهو پريس R1 گھر جي صفحي ڏانھن واپس وڃڻ لاء.

2.8 Temperature Unit Setting (C6)

Switch between Celsius (°C) and Fahrenheit (°F):

1. ڏانهن وڃو C6 page in the settings menu.
2. کي دٻايو L button to start the setting process.
3. کي دٻايو R1 °C ۽ °F جي وچ ۾ سوئچ ڪرڻ لاءِ بٽڻ
4. کي دٻايو L سيٽنگ جي تصديق ۽ محفوظ ڪرڻ لاءِ بٽڻ دٻايو.
5. ڊگهو پريس R1 گھر جي صفحي ڏانھن واپس وڃڻ لاء.

2.9 Odograph Setting (C8)

Set the odograph value:

1. ڏانهن وڃو C8 page in the settings menu.
2. کي دٻايو L button to start the setting process. The adjustable digit will flash.
3. کي دٻايو R1 button to adjust the value of the flashing digit.
4. کي دٻايو R2 button to switch between digits.
5. Once the desired odograph value is set, press the L سيٽنگ جي تصديق ۽ محفوظ ڪرڻ لاءِ بٽڻ دٻايو.
6. ڊگهو پريس R1 گھر جي صفحي ڏانھن واپس وڃڻ لاء.

2.10 Customizable Data Fields (via App)

Personalize the data displayed on your M3 screen using the CYCPLUS Fit App:

• Open the CYCPLUS Fit app and navigate to the settings.
• Select "Page Setup" to access the customizable data fields.
• You can choose to display various metrics such as current (NOW), average (AVG), maximum (MAX) values for Heart Rate (HR), Power (PWR), Distance (DST), Altitude (ALT), Time, and Ascent (AST).
• Select your preferred data fields and save the changes to apply them to your M3.

2.11 Data Transmission to Strava

Synchronize your cycling data with Strava for analysis and sharing:

• Open the CYCPLUS Fit app and go to your profile or settings section.
• Locate the option to "Link Strava" and follow the prompts to authorize the connection between the CYCPLUS Fit app and your Strava account.
• Once linked, you can sync your activity records from the app to Strava.

3. سار سنڀال

3.1 چارج ڪرڻ

Image: Close-up of the M3 showing the Type-C charging port.

• The M3 uses a USB Type-C charging port.
• مڪمل چارج لڳ ڀڳ 2.5 ڪلاڪ لڳن ٿا.
• The device offers up to 100 hours of working time on a single charge.

3.2 پاڻي صاف ڪرڻ

Image: The M3 computer with water droplets, illustrating its IPX6 waterproof rating.

• The CYCPLUS M3 has an IPX6 waterproof rating. This means it is water-resistant and can withstand splashes and rain.
• It is not designed to be submerged in water.

3.3 عام سنڀال

• ڊوائيس کي باقاعدي طور تي نرم، ڊي سان صاف ڪريوamp ڪپڙو.
• سخت ڪيميائي استعمال ڪرڻ کان پاسو ڪريو يا صاف ڪندڙ صاف ڪندڙ.
• جڏهن استعمال ۾ نه هجي ته ڊوائيس کي ٿڌي، سڪل جڳهه ۾ ذخيرو ڪريو.

4. مسئلا حل ڪرڻ

4.1 Factory Reset (C7)

If you encounter persistent issues or wish to clear all settings, you can perform a factory reset:

1. ڏانهن وڃو C7 page in the settings menu.
2. کي دٻايو L button to start the reset process.
3. کي دٻايو ۽ رکو R2 button to restore factory settings. The device will then power off.

4.2 GPS Positioning Issues

Image: The M3 computer with a satellite graphic, illustrating its fast GPS positioning capabilities.

• The M3 uses an AG3352Q chip for fast positioning, typically within 10 seconds.
• To further speed up GPS positioning, download Ephemeris data via the CYCPLUS Fit App. This data is valid for 6 hours.
• پڪ ڪريو ته توهان هڪ کليل علائقي ۾ آهيو جتي صاف پاڻي هجي view بهترين GPS سگنل استقبال لاء آسمان جو.
• If the last positioning distance does not exceed 200km in an open and stationary state within 3 days, positioning should be quick.

4.3 Sensor Connection Problems

Image: A cyclist with the M3 computer, showing support for various ANT+ and BLE 5.0 sensors.

• If a sensor is not detected during the ANT+ search (C2 settings), a horizontal line will appear.
• Ensure your external sensors (speed, cadence, heart rate, power meter) are powered on and within range of the M3.
• Check the sensor's battery level.
• Try unpairing and re-pairing the sensors through the C9 and C2 settings pages, respectively.

5. وضاحتون

6. استعمال ڪندڙ ٽوٽڪا

• سينسر مطابقت: The CYCPLUS M3 is compatible with ANT+ cadence sensors, including those from brands like XOSS. Ensure your sensor supports the ANT+ protocol for connection.
• ڪسٽمائيز ڊسپلي: If you can't see specific data like cadence or heart rate on the M3 screen, remember that data fields are fully customizable through the CYCPLUS Fit app. Connect your M3 to the app, go to 'Page Setup' in the settings, and select the metrics you wish to display.
• خودڪار Backlight: The device supports automatic backlight activation between 18:00 and 9:00 after setting your local time zone, improving visibility during low-light conditions.

7. وارنٽي ۽ سپورٽ

7.1 وارنٽي ڄاڻ

• A 1-year warranty is provided for the CYCPLUS M3 GPS Bicycle Computer. Please retain your proof of purchase for warranty claims.

7.2 ڪسٽمر سپورٽ

• For additional support, troubleshooting, or to access advanced features, download and utilize the CYCPLUS Fit App. The app provides a convenient interface for device configuration, data analysis, and firmware updates.