70mai جمپ اسٽارٽر ميڪس مائيڊريو PS06 يوزر مينوئل

1. تعارف

The 70mai Jump Starter Max Midrive PS06 is a powerful and portable emergency device designed to jump start vehicles with dead batteries and serve as a power bank for electronic devices. With a peak current of 1000A and a battery capacity of 18000mAh, it is suitable for a wide range of vehicles and provides reliable power when you need it most.

2. پيڪيج مواد

مھرباني ڪري ھيٺ ڏنل شين لاءِ دٻي کي چيڪ ڪريو:

• 70mai Jump Starter Max Unit (x1)
• Smart Battery Clip (x1)
• DC to Cigarette Lighter Adapter (x1)
• چارجنگ ڪيبل (x1)
• اسٽوريج ٿيلهو (x1)

3. پراڊڪٽ ختمview

The 70mai Jump Starter Max features a compact design with essential ports and indicators for ease of use.

4. وضاحتون

5. سيٽ اپ

5.1 شروعاتي چارجنگ

1. Before first use, fully charge the 70mai Jump Starter Max.
2. Connect the provided charging cable to the input port on the jump starter.
3. Connect the other end of the charging cable to a suitable 5V 2A USB power adapter (not included).
4. The indicator lights will show the charging status. All lights will be solid when fully charged.

5.2 بيٽري جي سطح چيڪ ڪرڻ

Press the power button briefly to check the current battery level. The indicator lights will illuminate to show the remaining charge.

6. آپريٽنگ هدايتون

6.1 ٽپو شروع ڪندي گاڏي

حفاظتي احتياط: Ensure the vehicle is in Park (P) or Neutral (N) and the parking brake is engaged. Turn off all vehicle accessories. Wear appropriate eye protection.

1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
2. Connect the smart battery clip to the 70mai Jump Starter Max unit.
3. ڳنڍيو ڳاڙهو (+) clamp of the smart battery clip to the positive (+) terminal of the vehicle's battery.
4. ڳنڍيو ڪارو (-) clamp of the smart battery clip to the negative (-) terminal of the vehicle's battery.
5. Ensure the smart battery clip indicator light is green, indicating a correct connection. If it's red or flashing, check the connections.
6. گاڏي جي انجن شروع ڪريو.
7. Once the engine starts, immediately remove the smart battery clip from the jump starter unit.
8. Then, disconnect the black (-) clamp گاڏي جي بيٽري مان، ان کان پوءِ ڳاڙهي (+) clamp.

6.2 پاور بينڪ طور استعمال ڪرڻ

The 70mai Jump Starter Max can also charge your electronic devices.

1. Connect your device's USB charging cable to the USB output port (5.0V 2.4A) on the jump starter.
2. جمپ اسٽارٽر خودڪار طريقي سان توهان جي ڊوائيس کي چارج ڪرڻ شروع ڪندو.

7. سار سنڀال

7.1 چارج ڪرڻ

• Recharge the jump starter after each use.
• For optimal battery life, recharge the unit every 3-6 months, even if not used.

7.2 اسٽوريج

• جمپ اسٽارٽر کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
• ان کي ٻارن جي پهچ کان پري رکو.
• Use the provided storage bag to protect the unit and accessories.

7.3 صفائي

• يونٽ کي نرم، سڪل ڪپڙي سان صاف ڪريو.
• استعمال نه ڪريو سخت ڪيميائي يا rasرندڙ صاف ڪندڙ.

8. مسئلا حل ڪرڻ

8.1 گاڏي شروع نه ٿي ٿئي

• ڪنيڪشن چيڪ ڪريو: Ensure the smart battery clips are securely connected to the correct terminals of the vehicle battery and the jump starter. The smart clip indicator should be green.
• Jump starter battery level: Make sure the jump starter has sufficient charge. Recharge if necessary.
• Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, multiple attempts or a longer connection might be needed. If the vehicle still doesn't start after a few attempts, there might be another issue with the vehicle.

8.2 Jump Starter Not Charging

• Check charging cable: Ensure the charging cable is properly connected to both the jump starter and the power adapter.
• پاور اڊاپٽر: Verify that the USB power adapter is functional and provides 5V 2A output.

8.3 Smart Battery Clip Indicator Issues

• Red light/Flashing: Indicates incorrect connection (reversed polarity), short circuit, or other safety issue. Disconnect immediately and re-check connections.
• روشني ناهي: Ensure the clip is fully inserted into the jump starter port and the jump starter has power.

9. استعمال ڪندڙ ٽوٽڪا

• Always keep the jump starter charged, especially before long trips or during cold weather.
• Store the unit in your vehicle for easy access during emergencies.
• Familiarize yourself with the smart battery clip's indicator lights to quickly identify connection issues.

10. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to your purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.