HP Type-C Flex IO v2 Component Expansion Card

1. تعارف

This manual provides essential information for the installation, operation, and maintenance of the HP Type-C Flex IO v2 Component Expansion Card. This card is designed to add USB Type-C connectivity to compatible HP desktop systems, enhancing their input/output capabilities. Please read this manual thoroughly before proceeding with installation or use.

This image displays the component expansion card, highlighting its compact design and the Type-C port.

2. وضاحتون

هي تصوير هڪ تفصيلي وضاحت فراهم ڪري ٿي view of the card's circuitry and connection points.

3. سيٽ اپ ۽ تنصيب

This component is intended for installation within compatible HP desktop systems. Professional installation is recommended. Always ensure your system is powered off and disconnected from all power sources before opening the chassis.

حفاظتي احتياط:

• Disconnect all power cables and external devices before opening the computer case.
• اجزاء کي اليڪٽرو اسٽيٽڪ ڊسچارج (ESD) نقصان کان بچائڻ لاءِ اينٽي اسٽيٽڪ کلائي پٽي پائڻ يا گرائونڊ ٿيل ڌاتو جي شيءِ کي بار بار ڇهڻ.
• Handle the expansion card by its edges to avoid touching sensitive components.

تنصيب جا مرحلا:

1. سسٽم تيار ڪريو: Power down your HP desktop computer completely and unplug the power cord. Disconnect all peripherals.
2. Open the Chassis: Refer to your HP system's service manual for instructions on how to safely open the computer case.
3. Locate the Flex IO Slot: Identify the dedicated Flex IO slot on your HP motherboard. This is typically a small, proprietary slot designed for such expansion cards.
4. ڪارڊ داخل ڪريو: Carefully align the HP Type-C Flex IO v2 card with the slot. Apply even, firm pressure to seat the card fully into the connector. Do not force it.
5. ڪارڊ محفوظ ڪريو: If your system provides a retention mechanism (e.g., a screw or clip), secure the card in place.
6. Close the Chassis: Reassemble the computer case according to your system's service manual.
7. ٻيهر ڳنڍيو ۽ پاور آن ڪريو: Reconnect all power cables and peripherals. Power on your computer.
8. ڊرائيور جي انسٽاليشن (جيڪڏهن ضروري هجي): The operating system should typically detect the new hardware automatically. If a driver is required, it will usually be installed automatically by Windows Update or can be downloaded from the official HP support webتوهان جي مخصوص سسٽم ماڊل لاءِ سائيٽ.

4. آپريٽنگ هدايتون

Once successfully installed, the HP Type-C Flex IO v2 card operates automatically. The added USB Type-C port(s) will function as standard USB ports, allowing you to connect compatible devices such as external drives, monitors (if the port supports video output), or other USB-C peripherals.

تصديق:

• After booting your system, open Device Manager (Windows) to confirm that the new USB controller or device is recognized without errors.
• Connect a known working USB Type-C device to the newly installed port to test its functionality.

5. سار سنڀال

The HP Type-C Flex IO v2 card requires minimal maintenance. Follow these general guidelines to ensure optimal performance and longevity:

• مٽي هٽائڻ: Periodically clean the interior of your computer case to prevent dust buildup on the card and other components, which can lead to overheating. Use compressed air for this purpose.
• ڪنيڪشن چيڪ: If you experience intermittent issues, ensure the card is securely seated in its slot.
• سافٽ ويئر اپڊيٽ: Keep your operating system and device drivers updated to ensure compatibility and optimal performance.

6. مسئلا حل ڪرڻ

If you encounter issues after installing the HP Type-C Flex IO v2 card, consider the following troubleshooting steps:

عام مسئلا ۽ حل:

• ڪارڊ جي سڃاڻپ نه ٿي:
  • Ensure the card is fully seated in the Flex IO slot.
  • Verify that your HP system model is compatible with this specific Flex IO v2 card.
  • Check your system's BIOS/UEFI settings to ensure the Flex IO slot is enabled.
  • Try reinstalling the card.
• USB-C Devices Not Functioning:
  • Test the USB-C device on another port or computer to confirm it is working correctly.
  • Ensure the necessary drivers are installed. Check Device Manager for any yellow exclamation marks next to USB controllers.
  • پنهنجي ڪمپيوٽر کي ٻيهر شروع ڪريو.
• وقتي رابطي:
  • Check for loose connections of the card within the slot.
  • Ensure the USB-C cable used is in good condition and properly connected.
  • Verify that the system's power supply is adequate for all installed components.

7. وارنٽي ۽ سپورٽ

This HP Type-C Flex IO v2 Component Expansion Card is provided with a 90 ڏينهن وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي.

For any issues or questions regarding the product, please contact the seller directly. Please note that the warranty may be voided if the product is damaged due to improper installation, misuse, or unauthorized modifications.

Return and Refund Policy (Summary):

• Excellent tested with 90 days warranty.
• Buyer and Seller share shipping costs for exchanges if motherboard problems are from the seller.
• Refunds are accepted if motherboard problems are from the seller, but the buyer covers shipping costs.
• Unreasonable refund requests or buyer purchasing the wrong model may result in a partial refund (e.g., 80% of the purchasing order).
• If the item is damaged, refunds may be refused. Communication with the seller is encouraged for solutions.
• Returning items should include a tracking number and be received within the warranty period.
• Disputes without prior communication may not be accepted.

8. استعمال ڪندڙ ٽوٽڪا

• خريد ڪرڻ کان اڳasing, always verify the compatibility of this Flex IO card with your specific HP desktop model and generation (e.g., g5, g6, g7, g8, g9).
• Keep a copy of your system's service manual handy during installation for precise guidance on opening the chassis and locating internal slots.
• If you are unsure about any installation step, consider seeking assistance from a qualified computer technician to avoid potential damage to your system or the component.
• Regularly back up your data before performing any hardware upgrades.