User Manual: 12.1" LCD Display + Touch Screen Digitizer Assembly Replacement for OnePlus Pad 2 / Pad Pro

1. تعارف

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your new 12.1-inch AAA+ quality LCD Display and Touch Screen Digitizer Assembly. This replacement part is specifically designed for the OnePlus Pad 2 (model OPD 2403) and OnePlus Pad Pro (model OPD 2404) tablets.

The screen assembly is fully pre-assembled and has undergone functional testing prior to shipment to ensure quality. A tempered film is also included for additional screen protection.

شڪل 1: اڳيان ۽ پوئتي view of the LCD and Digitizer Assembly

Figure 2: LCD and Digitizer Assembly with Model Identification

2. وضاحتون

3. سيٽ اپ ۽ تنصيب

Warning: Replacing a tablet screen requires specialized tools and technical expertise. Professional installation is highly recommended to avoid damage to your device or the new display assembly. Proceed at your own risk.

3.1 قبل از انسٽاليشن چيڪ لسٽ

• Ensure your workspace is clean, well-lit, and static-free.
• Gather necessary tools (e.g., prying tools, screwdrivers, heat gun/hair dryer, adhesive remover, new adhesive strips).
• Power off your OnePlus Pad completely before starting.
• Disconnect the battery if possible to prevent short circuits.

3.2 انسٽاليشن جا مرحلا (عام گائيڊ)

1. پوئين ڍڪ هٽايو: Carefully use prying tools to open the back cover of your tablet.
2. بيٽري ختم ڪريو: Locate and disconnect the battery connector from the motherboard.
3. پراڻي اسڪرين هٽايو: Apply gentle heat to the edges of the old screen to soften the adhesive. Carefully pry the old screen assembly off the tablet frame.
4. Disconnect Old Screen Cables: Disconnect the flex cables connecting the old LCD and digitizer to the motherboard.
5. Test New Screen (Crucial Step): Before fully installing, connect the flex cables of the new display assembly to the motherboard. Reconnect the battery temporarily and power on the tablet to test the display and touch functionality. Check for dead pixels, lines, touch responsiveness, and brightness. If any issues arise, disconnect and re-check connections. If problems persist, contact support.
6. فريم تيار ڪريو: Once tested, power off the tablet and disconnect the new screen. Clean any remaining old adhesive from the tablet frame.
7. نئون چپڪندڙ لاڳو ڪريو: Apply new adhesive strips or liquid adhesive to the tablet frame where the screen will sit.
8. نئين اسڪرين انسٽال ڪريو: Carefully align and place the new display assembly onto the tablet frame, ensuring the flex cables are properly routed and connected. Press firmly around the edges to secure the adhesive.
9. ڊوائيس ٻيهر گڏ ڪريو: Reconnect the battery, then reattach the back cover.
10. Apply Tempered Film: Clean the new screen surface and carefully apply the included tempered film for added protection.

4. آپريٽنگ هدايتون

Once the new LCD Display and Touch Screen Digitizer Assembly is successfully installed, your tablet will function as before. The operation of the screen is integrated with your tablet's operating system.

• پاور آن: Press and hold the power button on your tablet to turn it on.
• ٽچ انٽراڪشن: Use your fingers to navigate the tablet's interface, tap icons, swipe, and use multi-touch gestures as usual.
• ڊسپلي سيٽنگون: Adjust brightness, color temperature, and other display-related settings through your tablet's system settings menu.

5. سار سنڀال ۽ سنڀال

Proper care will extend the lifespan and maintain the clarity of your new display.

• صفائي: اسڪرين کي نرميءَ سان صاف ڪرڻ لاءِ نرم، لِنٽ فري مائڪرو فائيبر ڪپڙو استعمال ڪريو. ضدي داغن لاءِ، ٿورو ڊيampen the cloth with water or a screen-specific cleaning solution. Avoid harsh chemicals, abrasive materials, or excessive moisture.
• تحفظ: Keep the included tempered film applied to protect against scratches and minor impacts. Consider a protective case for your tablet.
• دٻاءُ کان بچو: Do not place heavy objects on the screen or apply excessive pressure, as this can damage the LCD panel or digitizer.
• گرمي پد: Avoid exposing the tablet to extreme temperatures, which can affect screen performance and longevity.

6. مسئلا حل ڪرڻ

جيڪڏهن توهان کي انسٽاليشن کان پوءِ مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن تي غور ڪريو:

• ڪابه ڊسپلي / ڪاري اسڪرين ناهي:
  - Ensure all flex cables are securely connected to the motherboard.
  - Check if the battery is properly connected and charged.
  - Try restarting the tablet.
• Touchscreen Not Responding / Inaccurate Touch:
  - Verify the digitizer flex cable is correctly seated.
  - Perform a hard reset of the tablet.
  - Ensure there is no debris or liquid under the screen protector or on the screen surface.
• Lines or Dead Pixels on Display:
  - This could indicate a faulty screen or damage during installation. Re-check flex cable connections. If the issue persists, contact customer support.
• اسڪرين چمڪندڙ:
  - Check all display flex cable connections. Loose connections can cause flickering.
  - Ensure the screen is properly seated and not under undue pressure.
• Backlight Issues (Too Dim/Bright, Uneven):
  - Check the backlight flex cable connection.
  - Adjust brightness settings in your tablet's system.

If troubleshooting steps do not resolve the issue, it is recommended to seek professional assistance or contact the seller for further support.

7. استعمال ڪندڙ ٽوٽڪا

• پيشه ورانه تنصيب: Due to the delicate nature of tablet components and the precision required, professional installation by a qualified technician is highly recommended.
• Thorough Testing: Always perform a comprehensive test of the new screen's functionality (display, touch, brightness) before fully adhering it to the tablet frame. This allows for easier rectification of any issues.
• مناسب اوزار: Use appropriate, non-damaging tools designed for electronics repair to prevent accidental damage to your device or the new screen.
• جامد روڪٿام: Take precautions against electrostatic discharge (ESD) during installation, such as using an anti-static wrist strap, to protect sensitive electronic components.

8. وارنٽي ۽ سپورٽ

This product is tested for functionality before shipping. For any issues related to manufacturing defects or performance problems not caused by improper installation, please contact the seller directly. Provide your order details and a clear description of the problem for assistance.

Please note that damage incurred during installation due to improper handling or lack of expertise may not be covered under warranty. Always ensure careful handling and, if unsure, opt for professional installation.