J48 بلوٽوٿ آڊيو رسيور استعمال ڪندڙ دستياب

1. تعارف

The J48 Bluetooth Audio Receiver is designed to upgrade traditional audio systems, such as old stereos, car audio systems, and wired headphones, with modern Bluetooth 5.3 wireless capabilities. It enables seamless audio streaming from your mobile devices and supports hands-free calling, enhancing your listening and communication experience.

This device features a high-performance Bluetooth 5.3 chip for stable and smooth connections, quick response, and strong anti-interference. It also supports a 'one-drag-two' function, allowing two mobile phones to connect simultaneously.

2. پيڪيج مواد

مھرباني ڪري ھيٺ ڏنل شين لاءِ دٻي کي چيڪ ڪريو:

• J48 بلوٽوت رسيور
• 3.5mm آڊيو اڊاپٽر
• آڊيو ڪيبل
• چارجنگ ڪيبل (قسم-سي)
• استعمال ڪندڙ دستي

3. وضاحتون

4. سيٽ اپ

4.1 آڊيو سسٽم سان ڳنڍڻ

1. Identify Audio Input: Locate the 3.5mm AUX input port on your car stereo, old-fashioned speaker, wired headphones, or power ampوierيڪ زنده
2. وصول ڪندڙ کي ڳنڍيو: Plug the 3.5mm audio adapter or the provided audio cable into the 3.5mm output interface of the J48 Bluetooth Receiver.
3. آڊيو سسٽم سان ڳنڍيو: Insert the other end of the 3.5mm adapter/cable into the AUX input of your target audio system.
4. پاور آن: Press and hold the power button on the J48 receiver until the display lights up, indicating it is powered on and ready for pairing.

4.2 شروعاتي بلوٽوٿ جوڙڻ

1. پاور آن: Ensure the J48 receiver is powered on. It will automatically enter pairing mode, indicated by a flashing Bluetooth icon or a specific light pattern on its display.
2. پنهنجي ڊوائيس تي بلوٽوٿ کي فعال ڪريو: On your mobile phone, tablet, or PC, go to the Bluetooth settings.
3. ڳولھيو ڊوائيسز: Scan for available Bluetooth devices.
4. Select 'J48': From the list of found devices, select 'J48' to initiate the connection.
5. ڪنيڪشن جي تصديق ڪريو: Once connected, the J48's display will show a steady Bluetooth icon or a confirmation message. You are now ready to stream audio.

5. آپريٽنگ هدايتون

5.1 ميوزڪ پلے بیک

After successfully pairing your mobile device with the J48 receiver, simply start playing music or any audio content on your device. The audio will be wirelessly transmitted to your connected stereo system or headphones.

5.2 ھينڊز فري ڪالنگ

The J48 receiver features a built-in clear microphone for hands-free calling. When connected to your phone:

• جواب ڏيو ڪال: Short press the call button (usually indicated by a phone icon) once.
• ڪال ختم ڪريو: Short press the call button once during a call.
• ڪال رد ڪريو: Long press the call button for 2 seconds.
• آواز جو اسسٽنٽ: Some models may support activating your phone's voice assistant with a specific button press (refer to device-specific instructions if available).

5.3 Multi-device Connection (One-Drag-Two)

The J48 supports connecting to two mobile phones simultaneously. This allows you to seamlessly switch between audio sources from two different devices without re-pairing.

1. پهرين ڊوائيس کي جوڙيو جيئن سيڪشن 4.2 ۾ بيان ڪيو ويو آهي.
2. Once the first device is connected, enable Bluetooth on the second device.
3. ڳولھيو 'J48' and connect. The receiver will maintain connection with both devices.
4. To switch audio, simply pause playback on one device and start playback on the other.

5.4 Navigation Voice Broadcast

When connected to your car audio system, the J48 can amplify navigation voice broadcasts from your mobile phone, ensuring you hear directions clearly and safely while driving.

6. چارج ڪرڻ

The J48 Bluetooth Audio Receiver has a built-in 250mAh rechargeable battery, providing over 16 hours of continuous use on a full charge.

1. چارج ڪيبل ڳنڍيو: Use the provided Type-C charging cable. Plug one end into the Type-C charging port on the J48 receiver.
2. پاور سورس سان ڳنيو: Plug the other end of the charging cable into a standard USB power adapter (not included), a computer USB port, or a car USB charger.
3. چارجنگ اشارو: The device's display or indicator light will show the charging status. It typically takes about 2 hours for a full charge.

7. سار سنڀال

• ڊوائيس کي سڪل رکو. نمي اندروني سرڪٽ کي نقصان پهچائي سگھي ٿي.
• ڊوائيس کي انتهائي گرمي پد تي ظاهر نه ڪريو.
• ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. سخت ڪيميڪلز يا رگڙيندڙ ڪلينر استعمال ڪرڻ کان پاسو ڪريو.
• جڏهن استعمال ۾ نه هجي ته ڊوائيس کي ٿڌي، سڪل جڳهه ۾ ذخيرو ڪريو.
• ڊوائيس کي مضبوط اثرن لاءِ ڇڏڻ يا تابع ڪرڻ کان پاسو ڪريو.

8. مسئلا حل ڪرڻ

8.1 پاور ناهي

• Ensure the device is fully charged. Connect it to a power source using the Type-C cable and allow it to charge for at least 30 minutes.
• Check the charging cable and power adapter for any damage.

8.2 ڊوائيس سان جوڙي نه ٿو سگهجي

• Make sure the J48 receiver is in pairing mode (flashing indicator).
• Ensure Bluetooth is enabled on your mobile device and it is within 10 meters of the receiver.
• Turn off and on the Bluetooth function on your mobile device.
• Restart both the J48 receiver and your mobile device.
• Clear the Bluetooth pairing list on your mobile device and try pairing again.

8.3 ڪو به آواز يا گهٽ آواز نه

• Check if the J48 receiver is correctly connected to your audio system's AUX input.
• Ensure the volume on both your mobile device and the connected audio system is turned up.
• Verify that the J48 receiver is successfully paired and connected to your mobile device.
• Try disconnecting and reconnecting the 3.5mm audio cable.

8.4 Intermittent Connection or Poor Audio Quality

• Ensure there are no obstacles between your mobile device and the J48 receiver that could interfere with the Bluetooth signal.
• Move closer to the receiver (within 10 meters).
• رسيور کي ٻين وائرليس ڊوائيسز جي ويجهو رکڻ کان پاسو ڪريو جيڪي مداخلت جو سبب بڻجي سگهن ٿا (مثال طور، وائي فائي روٽر، مائڪرو ويز).
• Ensure your mobile device is not running too many background applications that could affect Bluetooth performance.

9. استعمال ڪندڙ ٽوٽڪا

• For optimal audio quality, ensure your audio source (phone, tablet) is playing high-quality audio files.
• When using in a car, position the receiver where it has a clear line of sight to your phone for the most stable connection.
• صلاح وٺڻtage of the 'one-drag-two' feature to easily switch between personal and passenger music selections.
• Keep the device charged to avoid interruptions during long listening sessions or calls.

Video: A short product showcase demonstrating various features and uses of the J48 Bluetooth Audio Receiver.

10. وارنٽي ۽ سپورٽ

This product is manufactured by Banggood. For any technical support or warranty inquiries, please contact the seller or refer to the official Banggood support channels. Keep your purchase receipt as proof of purchase.