Conentool 5-in-1 Petrol Multi-Tool Instruction Manual

تعارف

The Conentool 5-in-1 Petrol Multi-Tool is a versatile and powerful gardening machine designed for various outdoor tasks. Equipped with a 52cc 2-stroke engine, it efficiently handles grass trimming, brush cutting, hedge trimming, and chainsaw operations. This manual provides essential information for the safe and effective use, assembly, and maintenance of your multi-tool.

حفاظت جي ڄاڻ

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• ذاتي حفاظتي سامان (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, gloves, long pants, and sturdy footwear.
• ٻارڻ سنڀالڻ: Handle petrol and oil with extreme care. Mix fuel in a well-ventilated area away from ignition sources. Do not smoke while refueling.
• ڪم جو علائقو: ڪم واري علائقي کي ويٺي ماڻهن، ٻارن ۽ پالتو جانورن کان صاف رکو. سٺي پير رکڻ ۽ توازن کي يقيني بڻايو.
• آپريشن کان اڳ چيڪ: Before each use, inspect the tool for loose parts, damage, or wear. Ensure all attachments are securely fastened.
• انجڻ جي حفاظت: Never operate the engine indoors. The exhaust fumes contain carbon monoxide, which is a dangerous gas.
• بلڊ جي حفاظت: Always ensure the engine is off and the spark plug cap is removed before performing any maintenance, cleaning, or changing attachments. Blades are sharp; handle with care.

پيڪيج مواد

Your Conentool 5-in-1 Petrol Multi-Tool package includes the following items:

• 1 x 52cc 2-Stroke Engine Unit
• 1 x Hedge Trimmer Attachment (12 inches)
• 1 x Chainsaw Pole Attachment (12 inches)
• 1 x Shaving Pole
• 1 x Connecting Rod
• 1 x Saw Blade (9 inches, 40 teeth)
• 1 x Nylon Grass Head (Black)
• 1 x Straw Rope (round 2.7mm × 15m)
• 1 x 3T Blade
• 1 x 12 inch Guide Sleeve
• 1 x Oil Pot
• 1 x ڪلهي وارو پٽي
• 1 x ھدايت وارو دستور
• 1 x Set of Straw Board
• 1 x Installation Package (tools)
• 1 x فنل
• 1 x هينڊل

وضاحتون

سيٽ اپ ۽ اسيمبلي

Before assembly, ensure all parts are present and undamaged. Always wear protective gloves during assembly.

1. Fuel Mixing

1. Use a clean, approved fuel container.
2. Mix unleaded gasoline with 2-stroke engine oil at a ratio of 25:1. For example, for 1 liter of gasoline, use 40ml of 2-stroke oil.
3. ايندھن جي ٽانڪي ۾ وجهڻ کان اڳ مرکب کي چڱي طرح ڌوڏيو.
4. Use the provided funnel to fill the fuel tank (capacity 1200ml).

2. Attaching the Handle and Harness

• Attach the loop handle to the main shaft at a comfortable position for operation.
• Securely attach the padded shoulder harness to the engine unit's loop. Adjust the straps for a snug and balanced fit to distribute weight evenly.

3. Attaching Work Heads

The multi-tool features a quick-release coupling for easy attachment changes.

Hedge Trimmer Assembly:

1. Align the hedge trimmer attachment with the main shaft's coupling.
2. Push until it clicks into place, ensuring it's fully seated.
3. Adjust the angle of the hedge trimmer by pressing the release button and setting it to the desired position.

Blade/Trimmer Line Head Assembly:

1. To remove the existing attachment, use the provided spanner to remove its screws.
2. Place the desired saw blade or trimmer line head onto the shaft.
3. Secure it with the cover and screws, then use a spanner to tighten. (For trimmer line, only rotation is needed).

Chainsaw Assembly:

1. Install the chain and the guide plate first, ensuring they are set into the corresponding position.
2. Close the lid and tighten the nut with a spanner.
3. Use a screwdriver to adjust the tension of the chain.

آپريٽنگ هدايتون

1. انجڻ شروع ڪرڻ

1. Ensure the fuel tank is filled with the correct 25:1 fuel/oil mixture.
2. Set the choke lever to the 'START' position (usually closed).
3. پرائمر بلب کي ڪيترائي ڀيرا دٻايو جيستائين ايندھن واپسي واري لائن ۾ نظر نه اچي.
4. Pull the starter cord firmly and smoothly until the engine fires (it may run briefly and then stop).
5. Once the engine fires, move the choke lever to the 'RUN' position (usually open).
6. اسٽارٽر ڪنڊ کي ٻيهر ڇڪيو جيستائين انجن شروع نه ٿئي ۽ آساني سان نه هلي.
7. ٿروٽل کي لڳائڻ کان اڳ انجن کي ڪجهه لمحن لاءِ گرم ٿيڻ ڏيو.

2. Using the Attachments

The multi-tool features humanized buttons for infinitely variable speed and cruise control dual switches for precise operation.

Grass Trimmer / Brush Cutter:

• Attach the desired blade (3T metal blade for thick weeds/brush, nylon line head for grass).
• Wear the shoulder harness and adjust for comfort.
• اوزار کي ٻنهي هٿن سان مضبوطيءَ سان پڪڙيو.
• Start the engine and gradually increase throttle.
• Swing the trimmer in a controlled motion, keeping the blade away from your body and obstacles.

Pole Saw:

• Attach the chainsaw pole. Ensure the chain is properly tensioned and lubricated.
• Use the harness for support, especially when reaching higher branches.
• Position the saw blade on the branch and apply gentle pressure. Let the saw do the work.
• Be aware of falling branches and maintain a safe distance.

هيج ٽرمر:

• Attach the hedge trimmer head.
• Adjust the angle of the blades as needed for the hedge shape.
• Hold the tool steady and move it smoothly along the hedge, cutting small amounts at a time.
• Avoid cutting thick branches that exceed the trimmer's capacity.

سار سنڀال

Regular maintenance ensures optimal performance and extends the life of your multi-tool.

• ايئر فلٽر: Clean the air filter regularly, especially in dusty conditions. A dirty air filter can reduce engine performance.
• اسپارڪ پلگ: اسپارڪ پلگ کي وقت بوقت معائنو ۽ صاف ڪريو. جيڪڏهن اهو ڳريل يا گندو آهي ته ان کي تبديل ڪريو.
• Blades and Chains: Keep all blades and chainsaw chains sharp and free of debris. Sharpen or replace as needed. Ensure proper chain tension for the chainsaw.
• لوڻ: For the chainsaw attachment, ensure the automatic chain lubrication system is working and the oil reservoir is filled with appropriate chain oil.
• ٻارڻ جو نظام: At the end of the season or before long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor of fuel. This prevents fuel degradation and gumming.
• عام صفائي: Clean the tool after each use, removing grass, dirt, and debris from the engine and attachments.

مشڪلاتون

انجن شروع نه ٿيندو:

• ايندھن چيڪ ڪريو: Ensure there is fresh, correctly mixed fuel in the tank.
• چوڪ پوزيشن: Verify the choke is in the correct 'START' position when cold, and moved to 'RUN' after initial firing.
• اسپارڪ پلگ: Check if the spark plug is clean and properly gapped. Replace if necessary.
• پرائمر بلب: Ensure the primer bulb is pressed until fuel is visible.
• ايئر فلٽر: A clogged air filter can prevent starting. Clean or replace.

Poor Performance / Lack of Power:

• ٻارڻ جو مرکب: Incorrect fuel/oil ratio can cause poor performance.
• ايئر فلٽر: A dirty air filter restricts airflow. Clean or replace.
• اسپارڪ پلگ: A fouled spark plug can lead to misfires. Clean or replace.
• Blades/Chain: Dull or damaged blades/chains will reduce cutting efficiency. Sharpen or replace.

وڌ ۾ وڌ وائبريشن:

• لوز حصا: Check for any loose bolts, nuts, or attachment connections.
• Damaged Blade/Head: A bent or damaged blade/trimmer head can cause imbalance. Replace if necessary.

استعمال ڪندڙن جون صلاحون

• Start with the Right Attachment: Always select the appropriate attachment for the task to ensure efficiency and safety.
• Maintain a Clean Fuel System: Use fresh fuel and store it properly to prevent carburetor issues.
• باقاعده چڪاس: Periodically check all fasteners and connections for tightness, especially after prolonged use.
• ergonomic استعمال: Adjust the harness and handle position to minimize strain and fatigue during operation.

وارنٽي ۽ سپورٽ

وارنٽي جي معلومات، ٽيڪنيڪل سپورٽ، يا متبادل حصن لاءِ، مھرباني ڪري سڌو سنئون وڪرو ڪندڙ يا ٺاھيندڙ سان رابطو ڪريو. خريداري جي ثبوت طور پنھنجي خريداري جي رسيد رکو.