HUPEJOS V8Pro-4CH 4K Dash Cam User Manual

1. تعارف ۽ پراڊڪٽ ختمview

The HUPEJOS V8Pro-4CH is a sophisticated 4-channel dash camera designed to enhance driving safety and record comprehensive footage. It features a 360° field of view, AI Driver Monitoring System (DMS), built-in WiFi and GPS, advanced night vision, voice control, and a 24-hour parking mode (requires separate hardwire kit).

This manual provides detailed instructions for the proper installation, operation, and maintenance of your dash cam. Please read it carefully before use.

اهم خاصيتون:

• 4-Channel 360° Coverage: Ultra-wide-angle 150°x4 lenses, adjustable for full vehicle protection.
• AI Driver Monitoring System (DMS): Detects fatigue, distraction, yawning, driver absence, phone calls, and smoking to improve driving safety.
• لوپ رڪارڊنگ ۽ جي-سينسر: خودڪار طريقي سان پراڻي foo کي اوور رائٽ ڪري ٿو.tage and locks important event videos upon collision.
• Built-in 5GHz Wi-Fi & GPS: Enables real-time video viewing via app, accurate location/speed tracking, and route playback.
• Super Night Vision & CPL Filter: Provides clear images in low-light conditions and reduces glare for enhanced clarity.
• وائس ڪنٽرول: Hands-free operation with English voice commands for various functions.
• 24 ڪلاڪ پارڪنگ مانيٽرنگ: Continuous surveillance recording when parked (requires separate hardwire kit).

پيداوار ختمview وڊيو:

هي وڊيو هڪ بصري جائزو فراهم ڪري ٿوview of the HUPEJOS V8Pro-4CH Dash Cam and its main features.

2. حفاظت جي ڄاڻ

پنهنجي يا ٻين جي زخمي کي بچائڻ لاءِ ، يا توهان جي ڊوائي کي نقصان پهچائڻ کان ، حفاظت لاءِ سڀ معلومات پڙهو استعمال ڪرڻ کان پهريان.

ڊيڄاريندڙ:

• حفاظت جي خبرداري ۽ قاعدن تي عمل نه ڪرڻ سان سنگين زخمي يا موت جو نتيجو ٿي سگهي ٿو.
• The HUPEJOS Dash Cam is not intended to be touched, modified, or calibrated while operating a vehicle.
• خراب ٿيل پاور ڪيڊس يا پلگ ، يا برقي برقي ساکٽ استعمال نه ڪريو.
• ڪار جي چارجر کي گندي هٿن سان نه ڇڪيو يا ڪنڊ کي ڇهڻ سان چارجر کي ڊسڪ ڪيو.
• چارجر يا ڊوائيس نه ورايو ، يا انهن جي اثر تي اثر وجهو.
• ڊوائيس کي ڪڏھن ڪڏھن يا پنڪچر نه ڪريو.
• ڊوائيس کي ڪڏهن به باهه ۾ نه وجهي.
• Never place the device in or on heating devices. The device may explode if overheated.
• ڊيوائس کي وڌيڪ خارجي دٻاءُ تي بي نقاب ڪرڻ کان پاسو ڪريو، جيڪو اندروني شارٽ سرڪٽ ۽ اوور گرم ٿيڻ جو سبب بڻجي سگهي ٿو.
• Avoid exposing your device to excessive cold or heat. Extreme temperatures can damage the device.
• ٻارن يا جانورن کي ڊوائيس کي چبائڻ يا چٻائڻ جي اجازت نه ڏيو.
• ڪڏهن به هڪ خراب چارجر استعمال نه ڪيو.

احتياط:

• حفاظتي احتياط ۽ ضابطن جي تعميل ۾ ناڪامي ملڪيت جي نقصان، سنگين زخمي يا موت جي نتيجي ۾ ٿي سگھي ٿي.
• Do not use your device near other electronic devices that emit radio signals, as this may cause malfunction.
• سخت تماڪ يا ڌوپيندڙ آلي کي بي نقاب نه ڪريو.
• If you notice strange smells or sounds, or see smoke/liquid, stop using the device immediately and contact support.
• Do not operate the controls of this product while driving.
• Ensure the dash cam is placed in a location that does not obstruct the driver's view.
• Always keep the camera lens clean and ensure it is not blocked.
• The device is recommended for use and storage within a temperature range of -22°F to 140°F (-30°C to +60°C) and humidity of 10% to 80%.
• جيڪڏهن توهان جو ڊوائيس گهڻو گرم ٿي وڃي ٿو ، ان کي استعمال ڪرڻ کان پهريان ٿڌي ٿيڻ جي اجازت ڏيو.
• پنهنجي ڊوائيس کي جدا ڪرڻ ، مرمت ڪرڻ ، يا تبديل ڪرڻ جي ڪوشش نه ڪريو.
• Clean your device and charger by wiping with a soft, moist cloth or eraser. Do not use chemicals or detergents.

3. شروع ڪرڻ

دٻي ۾ ڇا آهي:

• HUPEJOS V8Pro Dash Cam
• Rear camera with 19.6ft Rear Camera Cable
• سي پي ايل فلٽر
• ڪار چارجر قسم سي USB ڪيبل سان
• ڪار وائرنگ جو اوزار
• استعمال ڪندڙ دستي
• 3M جبل لاء Electrostatic فلم
• SD Memory Card (128G or 256G, as per standard)
• 3M Adhesive Mounts

شروعاتي سيٽ اپ:

1. لوازمات چيڪ ڪريو: Before installation, ensure all products and accessories are correct and complete.
2. ايس ڊي ڪارڊ فارميٽ ڪريو. To ensure optimal device performance, format the SD card before first use.
3. Power Off for Accessory Changes: During installation, do not insert the car key into the power supply, and do not insert or remove accessories like the SD card or rear camera while the dash cam is powered on. Perform these actions only when power is turned off.
4. خودڪار پاور آن: When the car key is plugged into the vehicle, the dash cam will automatically turn on. Verify that the power on/off function and camera display are normal.
5. SD Card Removal for Downloads: If you need to download recorded videos and images, turn off the camera first before removing the SD card.
6. SD Card Type: Use a U3 high-speed card (recommended capacity 32GB-256GB). Using a card lower than U3 may cause video stutter, black screen, or recording/playback issues.
7. App Connection Tip: For some mobile phone models, if the TsCam APP cannot connect to the preview, try turning on airplane mode on your mobile phone.

4. تنصيب

4.1 Main Body Installation

1. بينچ ٽيسٽ: Start the vehicle generator and perform a bench test. Connect the car charger to the cigarette lighter port and the dash cam, connect the rear camera, and insert the SD card to ensure the dash cam functions normally before official installation.
2. چڙهڻ جو هنڌ: Find a suitable spot on your windshield. Wipe the pre-assembled location with a clean wipe. Peel off the electrostatic sticker from the cellophane and transfer it to the desired place. Eliminate any air bubbles. It is recommended to install the back camera after standing still for half an hour to allow the static stickers to strengthen.
3. DMS Camera Placement: For AI car cameras with DMS (Driver Monitoring System), the main body needs to be mounted on the driver's side of the main cab or right in the middle of the front windshield to ensure the driver's face is recognized when using DMS.

4.2 In-Car Rear Camera Installation

1. مٿاڇري تيار ڪريو: Use a clean cloth to wipe the rear windshield where the rear camera will be installed.
2. اليڪٽرو اسٽيٽڪ اسٽيڪر لاڳو ڪريو: Peel off the electrostatic sticker from the cellophane and transfer it to the desired place.
3. محفوظ ڪئميرا: Eliminate air bubbles. It is recommended to install the rear camera after standing still for half an hour to allow the static stickers to strengthen.
4. نوٽ: The rear camera lens can be rotated 180° in front/back and left/right directions. It is not waterproof, so it is best installed inside the car, preferably on the rear windshield.

4.3 وائرنگ

Insert the power cord along the gaps between the front windshield and the ceiling, between the car body and the ceiling on the side of the passenger seat, and between the rear seats and the ceiling.

Diagram showing how to route the power cable and connect the rear camera.

4.4 Hardwire Kit Installation (Optional for Parking Mode)

A hardwire kit is required for the 24-hour parking mode. If parking mode is desired, this kit must be purchased separately.

Hardwire Kit Features:

• گھٽ بيٽري Voltage تحفظ
• ملٽي ان پٽ پاور
• يونيورسل مطابقت
• ڊيگهه: 11.5 فوٽ

وائرنگ هدايتون:

WARNING: Incorrect connection may disable Voltage تحفظ ۽ نقصان توهان جي ڪار.

• Red wire (ACC): Connects to a power source that is only active when the car key is on.
• Yellow wire (B+): Connects to a constant power source (always has power).
• Black wire (Ground): Connects to any grounded (negative) screw.

پاپ اپ: The fuse box panel is typically located on the driver's side dashboard. You can cut the head of the wires and connect them directly to your fuse if the fuses are small.

انسٽاليشن نوٽس:

Particular Wrong Connection:

If B+ and Ground are connected to 'Always On', the camera will run Parking Mode constantly, draining your car battery. Please check if your camera is working after 15 minutes your car is off (especially for cars with delayed power-off functions).

5. آپريشن ۽ سيٽنگون

5.1 پاور آن/آف

• پاور آن: With the camera off, insert the SD card into the card slot with the label facing the back of your camera. Short press the power button to turn on your V8Pro.
• بجلي بند ڪرڻ: ان کي بند ڪرڻ لاءِ پاور بٽڻ کي 3 سيڪنڊن لاءِ دٻايو ۽ رکو.

5.2 Dash Cam Display Interface

In video recording mode, short press the menu button to enter the main interface. The interface provides access to:

• ڊيش ڪيم: Driving recorder mode
• پلے بیک: Playback video or picture mode
• وائس ڪنٽرول: Voice control function setting
• ڊيش بورڊ: ڊيش بورڊ ڊرائيونگ موڊ
• سيٽنگون: سسٽم سيٽنگون
• DMS: Driver Monitoring System Setting

Visual representation of the dash cam's main interface and menu options.

5.3 وائس ڪنٽرول

Press the OK button to turn voice control on or off. Once activated, voice command instructions will pop up. Press any button to return to the main interface. The machine will respond to the following English voice commands:

• اسڪرين آن ڪريو
• وڊيو کي لاڪ ڪيو
• اسڪرين بند ڪريو
• فوٽو ڪڍو
• وڊيو جي شروعات
• وڊيو اسٽاپ
• سامهون ڪئميرا ڏيکاريو
• ريئر ڪيمرا ڏيکاريو
• Show Both Camera
• آڊيو آن ڪريو
• آڊيو بند ڪريو
• وائي فائي کي چالو ڪريو
• وائي فائي بند ڪريو

نوٽ: Voice commands only support English wake-up.

5.4 SD Card Record Files

The dash cam organizes recorded files into specific categories:

• SD Card Name: ذخيرو file
• واقعو: وڊيو files locked due to emergency or manual action.
• عام: Conventional driving video files.
• ڦوٽو: Snapshots.
• پارڪنگ: وڊيو files recorded by parking surveillance cameras.
• حصيداري ڪريو: Reserved for future functions.

Secondary Folder Structure:

• A: Front shots (video/pictures)
• B: Left shots (video/pictures)
• C: Right shots (video/pictures)
• D: Rear shot (video/picture)

5.5 Playback Operations and Settings

Button Operation During Playback:

• OKيڪ بٽڻ: تصديق ڪرڻ لاءِ مختصر دٻايو.
• اپ بٽڻ Short press to select the previous function/file.
• هيٺيان بٽڻ Short press to select the next function/file.
• مينيو بٽڻ: Long press to switch between recording mode/playback mode.
• پاور بٽڻ: Short press to return to the previous screen.

پلئه بیک File اڳيview اسڪرين:

• Video/Picture Switching: Long press the menu button to switch between video file اڳview ۽ تصوير file اڳview.
• مينيو رسائي: Press and hold the menu button to enter playback menu mode.
• نيويگيشن: Short press Up/Down buttons to view previous/next video/picture.
• Exit Playback: Short press the power button or long press the menu button twice to return to video recording mode.

پلے بیک سيٽنگون:

• حجم: Adjustable from 0-100 (Default: 50).
• وڊيو جو قسم: Normal/Parking mode/Emergency.
• ڪئميرا: A/B/C/D (selects which camera's footage کان view).
• حذف ڪريو: Delete one or all files.
• حفاظت: Protects selected files/منتخب ٿيل files/سڀني جي حفاظت ڪري ٿو files/سڀني کي تحفظ ڏئي ٿو files.

5.6 DMS (Driver Monitoring System)

The DMS monitors driver behavior and status. When key information of the driver's face is blocked, the algorithm may not detect it normally.

• DMS ON/OFF: Select the speed needed to activate or deactivate the DMS feature. The dash cam reboots when switching left/right camera.
• ڪئميرا: Select left or right camera based on vehicle's main cab direction.

When the following functions are enabled, a corresponding alarm will sound:

• Eyes Closing: Alarm if driver's eyes are closed for >3 seconds (fatigue driving). Detection range: head yaw angle deviation left/right 25 degrees.
• Yawning: Alarm if driver yawns for >3 seconds (fatigue driving).
• سگريٽ نوشي: Alarm if driver continuously smokes for >3 seconds.
• فون ڪال: Alarm if driver makes a phone call for >3 seconds.
• انتشار: Alarm if driver's head deviation (left/right >45°) lasts for >3 seconds.
• Driver Absence: Alarm if face cannot be monitored for >3 seconds.

5.7 Dashboard Driving Mode

When driving speed exceeds 50mph or 80km/h, the speed display font will turn red as a safety tip. GPS positioning is required for dashboard speed and direction functions to work. If there is no GPS signal (e.g., underground garage) or the machine is working outdoors for the first time, these functions may not be active for up to 2 minutes.

5.8 سيٽنگون مينيو

Access the settings menu to configure various parameters of your dash cam:

• جي سينسر: Sensitivity setting (OFF/high/medium low - default).
• پارڪنگ: Collision detection for parking mode (High/medium/low sensitivity).
• ٻولي: English, Español, Português, Русский, 简体中文, 繁體中文, Deutsch, Italiano, Français, 日本語, 한국어, Türkiye, Thai, Nederlands.
• اسڪرين سيور: Off (default), 1 minute, 3 minutes.
• گھڙي جوڙجڪ Set date and time (updates automatically with GPS).
• فارميٽ ڪارڊ: Option to format the memory card.
• تبديل ڪريو فيڪٽري سيٽنگون بحال ڪريو.
• جي پي ايس: ON (default)/OFF.
• جي پي ايس اسٽيٽس: Displays GPS satellite CN value.
• رفتار جي ترتيب: Adjusts speed display (+12 to -12).
• رفتار يونٽ: off/km/h/mph (default value).
• ٽائيم زون: Default -5:00.
• ڏينهن جي روشني جي بچت: On/Off (Default).
• وائي فائي: ON/OFF (default). Frequency: 2.4G/5G (default). Note: If your phone doesn't support 5G, switch to 2.4G.
• مووي جو موڊ: 3K+1080Px3 (default)/2K+1080Px3.
• IR ليڊ: On/Off/Auto (Default). Automatically opens in dark scenes, closes in bright scenes.

6. Mobile Phone APP Connection

The HUPEJOS dash cam can be connected to a mobile app for live viewing, video playback, and downloads.

6.1 ايپ ڊائون لوڊ ڪريو

ڳولھيو 'TsCam', 'WEcam', or 'Roadcam' in your device's app store. You can also scan the QR codes below:

TsCam App (Android/iOS)

نوٽ: If you cannot download the 'TsCam' APP due to updates, contact support@hupejos.com for assistance.

6.2 اي پي پي آپريشن

After successful WiFi connection, open the app and click "connect". The app will automatically connect to the camera and display real-time recording.

• جيئڻ View: Watch your dashcam's live video feed (within 10 feet).
• وڊيو پلے بیک: Watch recorded videos stored on your dashcam on your smartphone. (Note: Video and picture pixels in TsCam APP are compressed. For clearer information, download the picture/video or use the SD card on a computer.)
• وڊيو ڊائون لوڊ: Select and download videos or pictures from the SD card browsing interface or playback area.

وائي فائي جي حد: The WiFi range of V8Pro is 6-7 meters from the dash cam. It is not a cloud dash cam, so remote viewing beyond this range is not possible.

7. وائي فائي ڪنيڪشن

When WiFi is turned on, the display screen will show the ID and password.

ڪنيڪشن جا مرحلا:

1. Ensure the WiFi function on the dash cam is ON.
2. Open your phone's WiFi settings list.
3. Select the WiFi name (SSID: HUPEJOS-V8Pro-***).
4. Enter the password (PWD: 12345678) to connect.
5. Open the TsCam APP and click the "Connect" button to use.

وائي فائي ڪنيڪشن جو مسئلو حل ڪرڻ:

• Before connecting, ensure your smartphone's WiFi is enabled.
• If WiFi fails to connect or is interrupted, turn off your phone's cellular network or switch to airplane mode and reconnect.
• If you forget the WiFi password, you can restore the device to default settings, which will also reset the WiFi password to 12345678.

8. APP GPS Video Playback

جي طرف view GPS tracks in real-time preview on the APP:

1. The mobile phone needs to have mobile data traffic enabled.
2. Apple iPhones use the phone's built-in map to access GPS tracks. If the map is uninstalled, it needs to be reinstalled.
3. Android phones need to cache offline maps. You can do this by opening TsCam, clicking About, and selecting offline map to cache.

After entering the App's real-time preview، توھان ھيٺ ڏنل عملن کي انجام ڏئي سگھو ٿا:

• وڊيو پريview: After connecting to the camera, enter the real-time preview page. Click the full-screen icon or place the phone horizontally for full-screen mode. Use the window switch icon to switch between front, rear, and cabin video windows (for multi-channel dash cams).
• وڊيو پلے بیک: View وڊيو ۽ فوٽو files recorded on the SD card directly in the app.
• وڊيو ڊائون لوڊ: Select and download videos or pictures from the SD card browsing interface or video playback area. Downloaded videos can be played from the local file ايپ انٽرفيس جو سيڪشن.

9. PC GPS Video Playback

9.1 GPS فنڪشن

• The video interface indicates GPS status: a flashing icon means GPS is not positioned, a solid icon means GPS positioning is successful.
• The system time will synchronize after successful GPS positioning (according to the time zone set in the menu).
• In the "GPS status" of general settings, you can view حقيقي وقت جي GPS CN قدر.

9.2 Install GXPlayer

• MAC System: Search "GXPlayer" on the Apple App Store to install.
• ونڊوز سسٽم: The dash cam's memory card will automatically generate the GXPlayer installation file. Find "GXplayer" in the file, click download, and install.

9.3 Use GXPlayer

After installation, open GXPlayer to:

• Import video files after GPS positioning.
• Show travel track.
• Show vehicle position during driving.
• Display real-time speed.
• Access general settings for additional features.

10. وضاحتون

11. سار سنڀال

• Do not directly plug and unplug the cable or SD card unless the camera is turned off.
• While we do not encourage connecting your camera with other hardwire kits, if you do, ensure they are lower than 6V and higher than 2.5A.
• It is normal for the camera to be warm during operation. Excessive exposure to heat from the sun may cause damage not covered under the 1-year warranty.

12. مسئلا حل ڪرڻ

12.1 WiFi Connection Issues

• ڪنيڪشن جي تياري: Ensure mobile data/VPN is off. Be within 16ft of the V8Pro. Only one device connection is allowed.
• Connection Notice: ڊفالٽ وائي فائي پاسورڊ 12345678 آهي.

12.2 Won't Enter Parking Mode

• A hardwire kit is needed for parking mode.
• If the screen prompts "ACC disconnected", check the hardwire kit connection.
• If the blue light is on and the red light flashes, it indicates a parking mode issue.

12.3 Camera Always On After Car Turned Off

• This usually indicates incorrect wiring of the Red and Yellow wires in the hardwire kit.
• Ensure the Red wire is connected to the ignition fuse.

12.4 گهڻي گرمي

• The camera should operate within -22°F to 140°F (-30°C to +60°C).

12.5 Received Dead Camera

• Use a USB cable to connect your camera to a computer and check if the screen turns on.

12.6 Ultimate Solutions for Various Issues

• If the camera doesn't power on, unplug the SD card, use a pin to press the Reset button at the bottom of the camera, then reconnect.
• Ensure you are using the original car charger. If not, replace it.
• Remove the rear camera, SD card, and then reinsert them into the dash cam in sequence to check for short-circuit issues.
• Verify your SD card is U3 Class10. If not, replace it.
• If issues persist, use your personal USB charger. Check if the car charger is short-circuited.
• Download the latest firmware to upgrade your dash cam.
• If the above methods do not resolve your problem, contact HUPEJOS support.

13. استعمال ڪندڙ صلاحون ۽ سوال

13.1 SD ڪارڊ انتظام

• The dash cam supports standard SD cards up to 256GB.
• Always use Class 10, U3 (UHS-1) speed or above (SAMSUNG or LEXAR High Endurance recommended).
• Format new SD cards on the Dash Cam before use.
• The dash cam will prompt for formatting on the 1st and 15th of every month; this is a reminder and not mandatory if the card is working correctly.
• Memory cards can deteriorate after repeated overwriting cycles; this may affect file بچت.

13.2 WiFi Connection & App Usage

• If WiFi connection is interrupted, turn off your phone's cellular network or switch to Airplane Mode and reconnect.
• If the app is not running or cannot connect, ensure you have the latest version of 'TsCam', 'WEcam', or 'Roadcam' installed.
• The WiFi range is 6-7 meters. This is not a cloud dash cam, so remote viewing beyond this range is not possible.
• To change the WiFi password: Connect to the dash cam's WiFi, open the TsCam app, go to "Recorder settings" > "Device settings" > "DVR WiFi password", and enter the new password.

13.3 Parking Mode & Hardwire Kit

• 24-hour parking mode requires a separate hardwire kit or radar hardwire kit.
• If parking mode doesn't activate or the camera records all night, check the hardwire kit wiring. Incorrect wiring (especially red and yellow lines) or a disconnected red line can cause issues. Refer to the hardwire kit installation video for guidance.
• Ensure the installed radar (if applicable) is perpendicular to the ground for accurate sensitivity measurements.

13.4 Display & Recording

• If the camera screen flickers, it might be due to infrared light from the front or rear camera of the phone aimed at the in-car lens. This is normal.
• When the rear camera is not connected, the front resolution automatically switches to 4K. When the rear camera is connected, the front resolution will be 2K or 3K.
• WiFi is turned off by default. To use it, long press the OK button or enable it in settings.

14. وارنٽي ۽ سپورٽ

وارنٽي:

The HUPEJOS V8Pro-4CH Dash Cam comes with a 12-month warranty. You can extend this warranty to 24 months by visiting www.hupejos.com/?feature=warranty.

ڪسٽمر سپورٽ:

For any questions regarding your product, missing accessories, or technical support, please contact us:

• اي ميل: support@hupejos.com
• Responses are typically provided within 12-24 hours.
• We offer 7x24 hours of technical support.

Your feedback is important to us as we continuously strive to improve our products and user experience.

Scan for email and official site.