ASRock اسٽيل ليجنڊ 1000W 80 پلس گولڊ پاور سپلائي يوزر مينوئل

1. تعارف

The ASRock STEEL LEGEND 1000W is an advanced ATX 3.1 computer power supply designed for high-performance systems. It features 80 PLUS GOLD and Cybenetics Platinum (efficiency) and Lambda A (acoustics) certifications, ensuring high energy efficiency and low noise operation. With 1000W of continuous power and 83.4A on a single 12V line, it is suitable for demanding gaming PCs, workstations, and video processing systems. Its fully modular design and flat cables facilitate clean cable management and improved airflow within the PC case. The STEEL LEGEND 1000W is built to meet current and future hardware demands, including support for PCIe 5.1 and a native 12V-2x6 connector.

2. حفاظت جي ڄاڻ

• WARNING: Do not open the housing - risk of electric shock. There are no user-serviceable parts inside. Opening the unit will void the warranty.
• Ensure the power supply is disconnected from the main power outlet before installation, removal, or cleaning.
• بجلي جي فراهمي کي سٺي هوادار علائقي ۾ لڳايو، گرمي جي ذريعن، سڌي سج جي روشني ۽ نمي کان پري.
• صرف هن پاور سپلائي سان مهيا ڪيل ماڊيولر ڪيبل استعمال ڪريو. غير مطابقت رکندڙ ڪيبل استعمال ڪرڻ سان PSU ۽ ڳنڍيل حصن کي نقصان پهچي سگهي ٿو.
• سسٽم تي پاور ڪرڻ کان پهريان پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن.
• This power supply is equipped with multiple protection functions (OCP, UVP, SCP, OVP, OTP, OPP) to safeguard against electrical anomalies. If the unit shuts down unexpectedly, check for potential issues before restarting.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• ASRock STEEL LEGEND 1000W Power Supply Unit
• Modular Cable Set (see details below)
• اي سي پاور ڪارڊ
• چڙهڻ اسڪرو

Figure 3.1: ASRock STEEL LEGEND 1000W PSU and Retail Packaging

Figure 3.2: Modular Cable Set

Modular Cable Overview:

• 1x 20+4 pin ATX Motherboard Connector
• 2x 4+4 pin EPS CPU Connectors
• 3x 6+2 pin PCIe Connectors (for graphics cards)
• 1x 12+4 pin PCIe 5.1 Connector (for latest generation graphics cards)
• 9x SATA Power Connectors
• 3x 4-pin Molex Peripheral Connectors

4. سيٽ اپ ۽ تنصيب

Follow these steps to install your ASRock STEEL LEGEND 1000W Power Supply:

1. پنهنجو نظام تيار ڪريو: پڪ ڪريو ته توهان جو ڪمپيوٽر مڪمل طور تي بند آهي ۽ وال آئوٽليٽ کان ان پلگ ٿيل آهي. پنهنجو ڪمپيوٽر ڪيس کوليو.
2. پراڻي PSU کي هٽايو (جيڪڏهن قابل اطلاق هجي): پنهنجي پراڻي پاور سپلائي مان سڀئي ڪيبل ڌار ڪريو ۽ ان کي ڪيس مان هٽايو.
3. نئون PSU لڳايو: Carefully place the ASRock STEEL LEGEND 1000W into the PSU mounting bay of your computer case. Secure it with the provided screws. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if not).
4. Connect Modular Cables to PSU: Identify the necessary cables for your components (motherboard, CPU, graphics card(s), SATA devices, etc.). Connect these cables to the corresponding modular ports on the power supply. Refer to the diagram below for port identification.

Figure 4.1: Modular Cable Connection Panel

5. Connect Cables to Components:
   • ماءُ بورڊ: Connect the 20+4 pin ATX cable to your motherboard.
   • سي پي يو: Connect the 4+4 pin EPS CPU cable(s) to your motherboard's CPU power connector(s).
   • گرافڪس ڪارڊ: Connect the 6+2 pin PCIe cable(s) or the 12+4 pin PCIe 5.1 cable to your graphics card(s). Ensure you use the correct connector type for your specific GPU.
   • اسٽوريج ڊوائيسز: SATA پاور ڪيبلز کي پنهنجن SSDs، HDDs، ۽ آپٽيڪل ڊرائيوز سان ڳنڍيو.
   • پردي: Connect Molex cables to any other peripherals requiring this type of power.
6. ڪيبل جو انتظام: Route cables neatly to improve airflow and aesthetics. The flat cables provided are designed to assist with this.
7. فائنل چيڪ: سڀني ڪنيڪشنن کي ٻه ڀيرا چيڪ ڪريو ته جيئن پڪ ٿئي ته اهي مضبوطيءَ سان ويٺا آهن.

5. آپريٽنگ هدايتون

Once the power supply is installed and all components are connected:

1. AC پاور ڳنڍيو: Plug the AC power cord into the power supply's inlet and then into a wall outlet.
2. Power On the PSU: Locate the main power switch on the rear of the power supply and flip it to the 'ON' (I) position.

Figure 5.1: Rear Panel with Power Switch and iCOOL Switch

3. Start Your Computer: پنهنجي ڪمپيوٽر ڪيس تي پاور بٽڻ دٻايو.

iCOOL Mode

The ASRock STEEL LEGEND 1000W features an iCOOL MODE switch on the rear panel. This mode allows the fan speed to automatically adjust based on the power supply's temperature and load. When activated, the fan operates almost silently at low loads and increases speed for effective cooling under high loads. To enable or disable iCOOL MODE, toggle the switch next to the main power switch (refer to Figure 5.1).

6. سار سنڀال

• صفائي: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is turned off and unplugged before cleaning.
• هوا جو وهڪرو: Ensure that the power supply's intake and exhaust vents are not obstructed. Good airflow is crucial for efficient cooling and longevity.
• جدا نه ڪريو: Never attempt to open the power supply unit. High voltages are present inside, even when unplugged, and doing so will void your warranty.

7. مسئلا حل ڪرڻ

If you encounter issues with your power supply, try the following steps:

• طاقت ناهي:
  • چيڪ ڪريو ته ڇا AC پاور ڪنڊ محفوظ طور تي پاور سپلائي ۽ وال آئوٽليٽ ٻنهي ۾ لڳل آهي.
  • Ensure the main power switch on the PSU's rear panel is in the 'ON' (I) position.
  • ٻئي ڊوائيس ۾ پلگ ان ڪندي تصديق ڪريو ته وال آئوٽليٽ ڪم ڪري رهيو آهي.
  • Check all modular cable connections to ensure they are firmly seated in both the PSU and the components.
• سسٽم اوچتو بند ٿي وڃي ٿو:
  • The power supply's built-in protection mechanisms (OCP, OVP, OTP, OPP, UVP, SCP) may have activated due to an overload, overvoltage, overheating, or short circuit.
  • Ensure your system's power consumption does not exceed the PSU's capacity.
  • Check for proper ventilation around the PSU and inside the case to prevent overheating.
  • Disconnect non-essential peripherals to see if the issue persists.
• Fan Not Spinning (iCOOL Mode): If iCOOL Mode is enabled, the fan may not spin at low loads to maintain silent operation. This is normal. The fan will activate as the load and temperature increase. If the fan never spins even under heavy load, ensure iCOOL Mode is enabled or try disabling it to force the fan on.

If problems persist after performing these checks, contact ASRock customer support or your retailer for assistance.

8. وضاحتون

Figure 8.1: ASRock STEEL LEGEND 1000W Power Supply Unit

9. استعمال ڪندڙ ٽوٽڪا

• ڪيبل جو انتظام: صلاح وٺڻtage of the fully modular design and flat cables to keep your PC interior tidy. This not only improves aesthetics but also enhances airflow, contributing to better system cooling.
• بهترين کولنگ: Ensure your PC case has good airflow and that the PSU fan is not obstructed. If your case has a bottom intake, orient the PSU with the fan facing down.
• iCOOL Mode for Silence: If you prioritize quiet operation, especially during light tasks, ensure the iCOOL Mode is enabled. The fan will only spin up when necessary, keeping noise levels to a minimum.
• مستقبل جو ثبوت: The native PCIe 5.1 connector is designed for the latest high-power graphics cards. If you plan to upgrade your GPU in the future, this PSU is already equipped to handle it.

10. وارنٽي ۽ سپورٽ

The ASRock STEEL LEGEND 1000W Power Supply comes with a 10-year manufacturer's warranty, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or further assistance, please contact ASRock customer service or your authorized retailer. Keep your proof of purchase for warranty validation.