FLYLINKTECH Car Battery Jump Starter BD10

تعارف

Thank you for choosing the FLYLINKTECH BD10 Car Battery Jump Starter. This powerful and versatile device is designed to provide reliable jump-starting for a wide range of vehicles and serve as a portable power bank for your electronic devices. With an 8000A peak current and 26800mAh capacity, it ensures you're never stranded with a dead battery. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your jump starter.

پيداوار ختمview

The FLYLINKTECH BD10 is equipped with advanced features for optimal performance and safety:

• طاقتور جمپ شروعات: 8000A peak current and 26800mAh capacity, capable of starting all gas engines and diesel engines up to 12.0L. Features a 'BOOST' button for completely depleted batteries.
• Multifunctional Power Bank: Includes PD65W USB-C (input/output), dual USB-A Quick Charging 3.0 outputs (5V/3A, 9V/2A, 12V/1.5A), and a DC output (15V/10A) for charging phones, tablets, air compressors, and other devices.
• Smart Secure Protection: Upgraded smart jumper clamps offer 10 safety protections, ensuring safe operation even in extreme temperatures (-4°F to 140°F). IP65 waterproof rating allows for safe use in rainy conditions.
• سمجھدار LED ڊسپلي: A visibly clear 6-inch LED screen shows real-time operation status, battery level, and potential error warnings with corresponding numbers for easy troubleshooting.
• الٽرا برائيٽ ايل اي ڊي لائيٽ: Built-in 600 lumens LED light with three modes: Flashlight, Strobe, and SOS. Long press the button to switch between modes, ideal for emergencies and outdoor activities.

وضاحتون

سيٽ اپ ڪريو

1. شروعاتي چارج

Before first use, fully charge the jump starter. Connect the included USB-C cable to the jump starter's USB-C port and to a compatible USB wall charger (65W wall charger not included). The 6-inch LED display will show the charging progress. A full charge from 0% can take as little as 1.5 hours with a 65W charger.

2. بيٽري ليول چيڪ ڪريو

Always check the jump starter's battery level on the 6-inch LED display before use. Ensure it has sufficient charge to start your vehicle or power your devices.

آپريٽنگ هدايتون

1. گاڏي شروع ڪرڻ سان ٽپو ڏيو

1. Ensure the jump starter is adequately charged (at least 50% recommended).
2. Turn off your vehicle's ignition and all accessories.
3. ڳنڍيو ڳاڙهو (+) clamp of the smart jumper cables to the positive (+) terminal of your vehicle's battery.
4. ڳنڍيو ڪارو (-) clamp of the smart jumper cables to the negative (-) terminal of your vehicle's battery.
5. Plug the smart jumper cable connector into the jump starter's port. The LED display will show 'READY' or similar indication.
6. If the vehicle battery is completely depleted, press the 'BOOST' button on the jump starter.
7. Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
8. Once the vehicle starts, immediately disconnect the smart jumper cable from the jump starter, then remove the black (-) clamp, followed by the red (+) clamp گاڏي جي بيٽري مان.

2. پورٽيبل پاور بينڪ طور استعمال ڪرڻ

The BD10 can charge multiple electronic devices:

• يو ايس بي-سي آئوٽ: Use the PD65W USB-C port to fast charge compatible devices like laptops, tablets, and smartphones.
• USB-A آئوٽ پُٽ: Use the dual Quick Charging 3.0 USB-A ports (18W max each) to charge smartphones, tablets, and other USB-powered devices.
• ڊي سي ڊاڪٽري The 15V/10A DC output can power 12V accessories like air compressors or car vacuums using the included DC cigarette lighter adapter.

3. Emergency LED Light

The built-in 600 lumens LED light has three modes:

• ٽارچ: عام روشني لاءِ.
• اسٽروب: اشارو ڏيڻ يا ڌيان ڇڪائڻ لاءِ.
• SOS: هنگامي سگنلنگ لاء.

To activate the light, press the light button. Long press the button to cycle through the different modes.

حفاظتي احتياط

• استعمال ڪرڻ کان پهريان سڀ هدايتون احتياط سان پڙهو.
• Do not immerse the unit in water. The IP65 rating protects against splashes, but not submersion.
• جمپ نه ڪريو ھڪڙي frozenميل بيٽري شروع ڪريو.
• مثبت ۽ منفي cl کي ڳنڍڻ نه ڏيوampگڏ آهي.
• Do not attempt to jump start vehicles that exceed the specified engine displacement limits.
• ٻارن جي پهچ کان پري رکو.
• Store in a cool, dry place away from direct sunlight and high temperatures.
• If the jump starter becomes excessively hot during use, disconnect it immediately and allow it to cool down.
• سمارٽ جمپر clamps provide 10 safety protections, including reverse polarity, over-current, short-circuit, over-charge, and over-temperature protection. Pay attention to warning icons on the LED display.

سار سنڀال ۽ اسٽوريج

• بيٽري جي صحت کي برقرار رکڻ لاءِ، جمپ اسٽارٽر کي هر 3-6 مهينن ۾ ري چارج ڪريو، جيتوڻيڪ استعمال نه ڪيو وڃي.
• يونٽ کي سڪل، نرم ڪپڙي سان صاف ڪريو. سخت ڪيميڪل يا رگڙيندڙ مواد استعمال نه ڪريو.
• Store the jump starter and accessories in the provided portable EVA carrying case to protect them from damage.
• Avoid storing the unit in extreme temperatures (above 140°F or below -4°F) for extended periods.

مشڪلاتون

• گاڏي شروع نه ٿيڻ:
  • Check if the jump starter has sufficient charge.
  • ڪل کي يقيني بڻايوamps صحيح بيٽري ٽرمينلز سان محفوظ طور تي ڳنڍيل آهن (ڳاڙهو کان مثبت، ڪارو کان منفي).
  • If the battery is completely dead, use the 'BOOST' function.
  • Check for error messages on the LED display and refer to the corresponding warnings.
• Jump starter not charging:
  • Ensure the USB-C cable and wall charger are working correctly.
  • Verify the USB-C cable is fully inserted into the jump starter's port.
• ايل اي ڊي لائيٽ ڪم نه ڪري رهي آهي:
  • Ensure the jump starter has power.
  • Press the light button firmly. Long press to cycle modes.

The intelligent LED screen will display warning icons and numbers in case of misuse, helping you to identify and correct issues promptly.

استعمال ڪندڙن جون صلاحون

• For optimal performance, try to keep the jump starter charged above 50% when not in use, especially if you anticipate needing it for an emergency.
• Always store the jump starter in an easily accessible location in your vehicle, such as the glove compartment or trunk, so it's ready when you need it.
• When using the power bank feature, ensure your devices are compatible with the output voltages and currents to prevent damage.

وارنٽي ۽ سپورٽ

Your FLYLINKTECH BD10 jump starter comes with a 2-YEAR FREE Warranty. For any questions, technical assistance, or warranty claims, please contact our customer service. We offer 7/24 Customer Service and Lifetime Technical Support to ensure your satisfaction.