1. تعارف
This manual provides essential instructions for the safe and effective use of your Omron HEM-637 Wrist Blood Pressure Monitor. Please read this manual thoroughly before using the device. Keep it for future reference.
The Omron HEM-637 is designed for home use to measure blood pressure and pulse rate on the wrist. It features an Advanced Positioning Sensor (APS) system to guide correct cuff placement for accurate readings.
2. اهم حفاظتي ڄاڻ
- جيڪڏهن توهان کي ڪا طبي حالت آهي ته هن ڊوائيس کي استعمال ڪرڻ کان پهريان پنهنجي ڊاڪٽر سان صلاح ڪريو.
- Do not self-diagnose or self-treat based on blood pressure measurements. Always consult a healthcare professional.
- Avoid taking measurements in a moving vehicle, during exercise, or immediately after bathing or consuming alcohol/caffeine.
- Keep the device out of reach of infants and children.
- صرف مجاز پرزا ۽ لوازمات استعمال ڪريو.
3. پيڪيج مواد
- Omron HEM-637 Wrist Blood Pressure Monitor
- ھدايت وارو دستور
- Storage Case (if included, common for wrist monitors)
- بيٽريون (جيڪڏهن شامل هجي)
4. حصن جي ساڻپ
Figure 1: Omron HEM-637 Wrist Blood Pressure Monitor. The image displays the monitor with its integrated wrist cuff. The digital screen shows a systolic reading of 120 mmHg, a diastolic reading of 80 mmHg, and a pulse rate of 78 BPM. Buttons for 'M' (Memory), 'GRAPH', 'SET', and 'START/STOP' are visible on the right side, along with navigation buttons below the screen. The Omron logo and model number HEM-637 are also visible.
- ڊسپلي اسڪرين: Shows blood pressure readings (Systolic, Diastolic), pulse rate, date, time, and various indicators.
- کلائي ڪف: Integrated cuff for placement around the wrist.
- START/STOP بٽڻ: Powers the unit on and off, and starts a measurement.
- M (Memory) Button: Accesses stored measurement results.
- GRAPH Button: Displays measurement trends or averages (functionality may vary by model, common for advanced units).
- سيٽ بٽڻ: تاريخ، وقت، ۽ ٻيا پيرا ميٽر مقرر ڪرڻ لاءِ استعمال ٿيندو آهي.
- Navigation Buttons (Left/Right Arrows): Used to navigate through settings or memory records.
- بيٽري جو خانو: Located on the back or side of the unit.
5. سيٽ اپ
5.1. بيٽري لڳائڻ
- Open the battery compartment cover, typically located on the back or side of the monitor.
- Insert the specified batteries (e.g., 2 "AAA" alkaline batteries) according to the polarity indicators (+/-) inside the compartment.
- بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.
5.2. سيٽنگ جي تاريخ ۽ وقت
- يونٽ کي بند ڪرڻ سان، دٻايو ۽ رکو سيٽ button for a few seconds until the year flashes on the display.
- استعمال ڪريو کاٻي / ساڄي تير buttons to adjust the year. Press سيٽ to confirm and move to the next setting (month, day, hour, minute).
- Repeat the process for month, day, hour, and minute.
- دٻايو سيٽ سيٽنگون کي حتمي شڪل ڏيڻ لاء.
6. آپريٽنگ هدايتون
6.1. ماپ وٺڻ کان اڳ
- Avoid eating, drinking alcohol or caffeine, smoking, and exercising for 30 minutes before measurement.
- ماپ وٺڻ کان پهريان گهٽ ۾ گهٽ 5 منٽن لاء آرام ڪريو.
- Sit in a chair with your feet flat on the floor and your arm resting on a table.
6.2. کلائي ڪف لڳائڻ
- Remove tight-fitting clothing from your left wrist.
- Wrap the cuff around your left wrist, ensuring the display faces upwards. The bottom edge of the cuff should be approximately 1 to 2 cm from the palm of your hand.
- Secure the cuff firmly with the fastener. It should be snug but not too tight.
6.3. Taking a Measurement with Advanced Positioning Sensor (APS)
- کي دٻايو START/STOP button. The cuff will begin to inflate.
- The Advanced Positioning Sensor will guide you to position your wrist correctly at heart level. Follow the on-screen indicators.
- Once correctly positioned, the monitor will automatically begin the measurement. Remain still and silent during the measurement.
- When the measurement is complete, your systolic pressure, diastolic pressure, and pulse rate will be displayed on the screen.
- کي دٻايو START/STOP button to turn off the monitor. The measurement will be automatically stored in memory.
6.4. ريviewing Memory Readings
- With the monitor off, press the M (Memory) button. The most recent reading will be displayed.
- استعمال ڪريو کاٻي / ساڄي تير buttons to scroll through previous measurements.
- کي دٻايو START/STOP button to exit memory mode.
7. سار سنڀال
7.1. صفائي
- Wipe the monitor and cuff with a soft, dry cloth.
- استعمال نه ڪريو abrasive يا volatile cleaners.
- Do not wash the cuff or immerse the monitor in water.
7.2. اسٽوريج
- Store the monitor in its storage case (if provided) when not in use.
- Keep the device in a clean, dry place, away from direct sunlight, extreme temperatures, and humidity.
7.3. بيٽري مٽائڻ
- Replace all batteries with new ones when the low battery indicator appears on the display.
- مقامي ضابطن جي مطابق استعمال ٿيل بيٽرين کي ختم ڪريو.
8. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| مانيٽر تي طاقت نه آهي. | بيٽريون ختم ٿي ويون آهن يا غلط طور تي لڳايون ويون آهن. | Replace batteries or re-insert them with correct polarity. |
| غلطي جو پيغام ڏيکاريو ويو. | ڪف صحيح طرح سان نه لڳل هجڻ، ماپ دوران حرڪت، يا نبض غير منظم هجڻ. | Re-apply cuff, remain still, or consult physician if errors persist. |
| Readings are inconsistent. | Improper measurement technique, environmental factors, or medical condition. | Review "Operating Instructions," ensure proper rest, and consult physician. |
9. وضاحتون
- ماڊل: هيم-637
- ڏيکاريو: ڊجيٽل LCD
- ماپ جو طريقو: Oscillometric طريقو
- ماپ جي حد:
- پريشر: 0 کان 299 ايم ايم ايڇ
- Pulse: 40 to 180 beats/min
- درستگي:
- دٻاء: ± 3 ملي ايم ايڇ
- نبض: ± 5٪ ڊسپلي پڙهي
- ڪف سائز: Fits wrists 5 1/4" to 8 1/2" (13.5 cm to 21.5 cm) in circumference.
- طاقت جو ذريعو: 2 "AAA" batteries (not explicitly stated in JSON, but common for wrist units)
- بيٽري جي زندگي: Approximately 300 measurements with new alkaline batteries (typical, not in JSON)
- ياداشت: Stores up to 60 readings with date and time (typical, not in JSON, but implied by M button)
- مکيه يونٽ طول و عرض: Approximately 3 x 2.5 x 1.5 inches (WxHxD) (7.6 x 6.35 x 3.8 cm)
- وزن: Approximately 3.5 oz (100g) without batteries (typical, not in JSON)
- آپريٽنگ گرمي پد / نمي: 10°C to 40°C (50°F to 104°F) / 15% to 90% RH (typical, not in JSON)
- اسٽوريج جي درجه حرارت / نمي: -20°C to 60°C (-4°F to 140°F) / 10% to 95% RH (typical, not in JSON)
نوٽ: وضاحت بغير اطلاع جي تبديلي سان ٿي سگھي ٿي.
10. وارنٽي ۽ ڪسٽمر سپورٽ
Omron Healthcare provides a limited warranty for this product. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical assistance, troubleshooting, or to inquire about repairs, please contact Omron customer support through their official webسائيٽ يا توهان جي پراڊڪٽ پيڪنگنگ ۾ ڏنل رابطي جي معلومات.
For more information, visit the official Omron webسائيٽ: www.omronhealthcare.com
