MXR® Distortion+ Instruction Manual

1. تعارف

The MXR Distortion+ is a classic guitar effects pedal known for its distinctive distortion sounds. This compact unit is designed to deliver a range of tones from subtle overdrive to classic hard rock distortion. Its germanium-powered, soft-clipped distortion circuit has been a staple on countless recordings, offering a unique sonic character.

اهم خاصيتون:

• Germanium-powered, soft-clipped distortion
• Classic 70s distortion
• Classic early ’80s hard rock tone
• ٺهيل ۽ پائيدار ڊيزائن

2. سيٽ اپ

Before connecting your MXR Distortion+ pedal, ensure your amplifier is turned off. This prevents any potential damage to your equipment.

ڪنيڪشن:

1. پنھنجي گٽار کي ڳنڍيو INPUT معياري 1/4 انچ جي اوزار ڪيبل استعمال ڪندي پيڊل جي ساڄي پاسي جيڪ.
2. ڳنڍيو آئوٽ پيڊل جي کاٻي پاسي تي جڪ توهان جي amplifier's input using another 1/4-inch instrument cable.

پيڊل کي طاقت ڏيڻ:

The MXR Distortion+ can be powered by a 9V battery or an optional 9V DC power adapter (center negative).

• بيٽري لڳائڻ: To install a 9V battery, remove the bottom plate of the pedal by unscrewing the four screws. Connect the battery to the clip and place it inside the enclosure before reattaching the bottom plate.
• پاور اڊاپٽر: Connect a 9V DC power adapter (not included) to the power jack on the side of the pedal.

تصوير: پاسي view of the MXR Distortion+ pedal, highlighting the input, output, and 9V power jacks.

تصوير: هيٺيون view of the MXR Distortion+ pedal, showing the four screws that secure the battery compartment.

3. ڪنٽرول

The MXR Distortion+ features two primary control knobs and a footswitch for activation.

تصوير: مٿي view of the MXR Distortion+ pedal, clearly showing the 'Output' and 'Distortion' control knobs.

• پيداوار: This knob controls the overall output volume of the effect. Turn clockwise to increase volume, counter-clockwise to decrease.
• تقسيم: This knob adjusts the amount of distortion applied to your signal. Turn clockwise for more distortion, counter-clockwise for less.
• فوٽ سوئچ: Toggles the effect on/off. The LED illuminates when the effect is active.

4. آپريٽنگ

The MXR Distortion+ is straightforward to operate, allowing you to quickly dial in a variety of distorted tones.

• Classic Blues Tones: Set the DISTORTION control low (e.g., 9 o'clock to 12 o'clock) and adjust the OUTPUT knob to drive the front end of your amplifier. This will produce a warm, overdriven blues tone.
• Early '80s Hard Rock: Max out the DISTORTION knob (e.g., 3 o'clock to full clockwise) for a powerful, saturated hard rock tone. Adjust OUTPUT to match your desired volume.
• Subtle Boost/Overdrive: For a cleaner boost with a touch of grit, set DISTORTION very low and OUTPUT to unity gain or slightly above.

Demonstration Videos (for related MXR pedals):

5. وضاحتون

6. سار سنڀال

• صفائي: پيڊل کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. رگڙيندڙ صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• اسٽوريج: پيڊل کي خشڪ ماحول ۾ ذخيرو ڪريو، انتهائي گرمي پد ۽ سڌي سج جي روشني کان پري.
• بيٽري جي زندگي: If using a battery, disconnect the input cable when not in use to conserve battery life. Remove the battery if the pedal will not be used for an extended period.

7. مسئلا حل ڪرڻ

• آواز ناهي:
  • Check all cable connections (guitar to input, output to amp).
  • Ensure the pedal is receiving power (check battery or power adapter).
  • Verify your guitar and ampلائفائر صحيح ڪم ڪري رهيا آهن.
• Weak or Distorted Sound (unexpectedly):
  • Replace the 9V battery if it's low.
  • Ensure the power adapter meets the 9V DC (center negative) specification.
  • Adjust the OUTPUT and DISTORTION knobs to find your desired tone.

8. وارنٽي ۽ سپورٽ

This product is covered by the manufacturer's warranty. For detailed warranty information or technical support, please refer to the official MXR webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.