MXR Bass D.I.+ Instruction Manual

تعارف

The MXR M80 Bass D.I.+ is a robust and versatile preamp pedal engineered to provide bass players with a wide array of tonal possibilities for both live performances and studio recording. It features independent clean and distortion channels, a 3-band EQ, a noise gate, and multiple output options, making it an essential tool for any bassist.

سيٽ اپ ڪريو

Before connecting the MXR Bass D.I.+, ensure all audio equipment is turned off to prevent damage. The pedal can be powered by a 9V battery or an external 9V DC power supply (not included).

يونٽ کي طاقت ڏيڻ

• بيٽري: Open the battery compartment on the bottom of the pedal and connect a 9V battery.
• بجلي جي فراهمي: Connect a 9V DC power adapter (center negative) to the POWER jack on the side of the pedal.
• پريتم پاور: The unit can also be powered via phantom power from a mixing console through the DIRECT OUTPUT (XLR) connection. Ensure the PHANTOM/GROUND switch is set appropriately.

ڪنيڪشن

• داخل: Connect your bass guitar to this 1/4-inch jack.
• پيداوار: Connect this 1/4-inch jack to your bass ampلائفائر جو ان پٽ.
• DIRECT OUTPUT (XLR): Connect this XLR output to a mixing console or recording interface for a balanced, direct signal.
• PARALLEL OUTPUT: This 1/4-inch jack provides an unprocessed, buffered signal from your bass, useful for connecting to a tuner or a second ampوierيڪ زنده

آپريٽنگ ڪنٽرول

The MXR Bass D.I.+ features a comprehensive set of controls to shape your bass tone. Refer to Figure 3 for the layout of the controls.

Clean Channel Controls

• صاف مقدار: Adjusts the overall output level of the clean channel.
• رنگ: Engages a preset EQ contour for a modern, scooped sound. This button illuminates when active.

Distortion Channel Controls

• حجم: Controls the output level of the distortion channel.
• ملاوٽ: Mixes the distorted signal with the clean signal. Turn clockwise for more distortion, counter-clockwise for more clean tone.
• ٽرگر: Sets the threshold for the built-in noise gate. Higher settings require a stronger input signal to open the gate.
• حاصل ڪريو Adjusts the amount of distortion applied to the signal.

EQ سيڪشن

• بيس: گھٽ فريڪوئنسي جواب کي ترتيب ڏئي ٿو.
• MID: وچين فريڪوئنسي جواب کي ترتيب ڏئي ٿو.
• ٽيبل: اعليٰ تعدد جي جواب کي ترتيب ڏئي ٿو.

Switches and Footswitches

• PHANTOM/GROUND: This switch controls the ground lift for the XLR output and enables phantom power operation. Set to 'Ground' to lift the ground and eliminate hum.
• گيٽ: Activates or deactivates the noise gate. The LED illuminates when the gate is active.
• EFFECT Footswitch: Toggles the entire effect (clean channel with EQ) on/off. The red LED indicates the effect is active.
• DISTORTION Footswitch: Engages or disengages the distortion channel. The red LED indicates distortion is active.

سار سنڀال

To ensure the longevity and optimal performance of your MXR Bass D.I.+, follow these maintenance guidelines:

• صفائي: پيڊل جي ٻاهرين حصي کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. رگڙيندڙ صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• اسٽوريج: پيڊل کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
• بيٽري مٽائڻ: If using battery power, replace the 9V battery when the pedal's performance degrades or the indicator LEDs dim. Disconnect the input cable when not in use to conserve battery life.
• ڪنيڪشن: Periodically check all cables and connections for wear and tear. Ensure jacks are free of dust and debris.

مشڪلاتون

If you encounter issues with your MXR Bass D.I.+, refer to the following common problems and solutions:

• آواز ناهي:
  • سڀ ڪيبل ڪنيڪشن چيڪ ڪريو (ان پٽ، آئوٽ پُٽ، پاور).
  • Ensure the pedal is receiving power (check battery or power supply).
  • Verify that the EFFECT footswitch is engaged (red LED on).
  • Check the volume knobs on the pedal and your ampوierيڪ زنده
• گونج يا گونج:
  • Try engaging the PHANTOM/GROUND switch to lift the ground.
  • Ensure all power supplies are properly grounded and not interfering with other electronics.
  • ناقص ڪيبلن جي چڪاس ڪريو.
• Distortion Not Engaging:
  • Ensure the DISTORTION footswitch is engaged (red LED on).
  • Adjust the GAIN knob to a higher setting.
• Signal Cutting Out (Noise Gate):
  • If the GATE is active, lower the TRIGGER knob setting.
  • If the GATE is not desired, disengage the GATE switch.

وضاحتون

وارنٽي ۽ سپورٽ

For detailed warranty information and technical support, please refer to the official MXR or Dunlop Manufacturing webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

آن لائين وسيلا:

• Official MXR Webسائيٽ: www.jimdunlop.com/mxr/
• Dunlop Manufacturing Support: www.jimdunlop.com/support/