1. تعارف
The Shure KSM32 is a high-quality, side-address cardioid condenser microphone designed for critical studio recording and live sound productions. It features an embossed single-diaphragm for smooth, neutral sound reproduction with extended frequency response, capturing the original sound source with clarity and detail.
This manual provides essential information for the proper setup, operation, and maintenance of your Shure KSM32 microphone to ensure optimal performance and longevity.
Image 1.1: The Shure KSM32 Cardioid Condenser Microphone.
2. پيڪيج مواد
Verify that your Shure KSM32 package contains the following items:
- Shure KSM32 Embossed Single-Diaphragm Cardioid Condenser Studio Microphone
- Padded, zippered carrying bag
- ٻرندڙ جبل
- شاک ماسٽر
- Red velvet bag
Image 2.1: Shure KSM32 microphone and included accessories.
3. اهم خاصيتون ۽ ڪارڪردگي
3.1. اهم خاصيتون
- ڪارڊيوڊ پولر نمونو: Provides excellent off-axis rejection, focusing on the sound source directly in front of the microphone.
- Embossed, High-Compliance Mylar Diaphragm: Ensures extended low-frequency response and excellent transient response.
- Class A, Transformerless Preamplifier Circuitry: Minimizes cross-over distortion for improved linearity across the full frequency range.
- 15 dB Attenuation Switch: Allows for handling extremely high sound pressure levels (SPL) without distortion.
- Switchable Low-Frequency Filter: Provides flexibility to reduce background noise or counteract the proximity effect.
- Integrated Three-Stage Pop Protection Grille: Reduces 'pop' sounds and other breath noise.
- اندروني شاک جبل: Minimizes the transmission of handling noise.
Image 3.1: The Shure KSM32 microphone with its shock mount, designed to reduce handling noise.
3.2. ڪارڪردگي جا خاصيتون
- Extended frequency response for natural sound reproduction.
- Very low self-noise for clean recordings.
- Exceptional low-frequency reproduction.
- High output level and high input SPL capability.
- No cross-over distortion.
- Extremely uniform polar response.
- Superior common mode rejection and suppression of radio frequency interference.
4. سيٽ اپ ۽ ڪنيڪشن
The Shure KSM32 is a condenser microphone and requires 48V phantom power to operate. Ensure your mixer, audio interface, or preamplifier provides phantom power before connecting the microphone.
- چڙهڻ: Secure the KSM32 microphone into the provided shock mount or swivel mount. Attach the mount to a standard microphone stand.
- ڪنيڪشن: Connect a balanced XLR cable from the microphone's output to an input on your mixer, audio interface, or preamplifier. Ensure the XLR cable is in good condition.
- پريتم پاور: Activate the 48V phantom power on your connected device. The microphone will not function without it.
- حاصل Staging: Adjust the input gain on your mixer or interface to achieve an appropriate signal level, avoiding clipping or distortion.
5. آپريٽنگ هدايتون
5.1. ڪنٽرول ۽ ترتيبون
The KSM32 features two switches on its body for sound shaping:
- Attenuation Switch (Pad): This switch provides a 0 dB or -15 dB attenuation. Use the -15 dB setting when recording very loud sound sources (e.g., close-miked drums, loud guitar amplifiers) to prevent input overload and distortion in your preampوierيڪ زنده
- گھٽ فريڪوئنسي فلٽر سوئچ: This switch offers three settings:
- فليٽ: No low-frequency roll-off.
- -6 dB/octave below 115 Hz: Reduces low-end rumble and proximity effect.
- -18 dB/octave below 80 Hz: Provides a steeper low-frequency cut for more aggressive rumble reduction or to compensate for extreme proximity effect.
5.2. تجويز ڪيل درخواستون
The KSM32 is a versatile microphone suitable for a wide range of recording and live sound applications:
- آواز: Solo vocals, background vocals, voice-overs, broadcasting.
- Acoustic Instruments: Piano, acoustic guitar, drums, percussion, strings.
- Wind Instruments: Brass and woodwind instruments.
- Low-Frequency Instruments: Double bass, electric bass, kick drum.
- Overhead Miking: Drums or percussion.
- Ensembles: Choral or orchestral recordings.
- ڪمري جو ماحول: Capturing the natural sound of a room for guitar amplifiers or drums.
6. وضاحتون
| تفصيل | تفصيل |
|---|---|
| مائڪروفون جو قسم | مستقل طور تي جانبدار ڪنڊينسر |
| پولر نمونو | ڪارڊيوڊ |
| تعدد جواب | 20 Hz کان 20,000 Hz تائين |
| ٻاھر نڪرڻ واري رڪاوٽ | 150 اوهم (اصل) |
| Attenuation سوئچ | 0 dB or -15 dB |
| Low Frequency Response Switch | Flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz |
| پريتم پاور جي گهرج | 48 Vdc +/- 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 |
| موجوده ناڻو | 4.65 mA typical at 48 Vdc |
| عام موڊ رد ڪرڻ | ≥50 dB, 20 Hz to 20 kHz |
| Sensitivity (at 1000 Hz; 1 Pa = 94 dB SPL) | -36 ڊي بي وي / پي (16 ايم وي) |
| Self-noise (A-weighted, IEC 651) | 13 dB equivalent SPL |
| قطبيت | ڊاءفرام تي مثبت دٻاء مثبت حجم پيدا ڪري ٿوtagپن 2 جي نسبت سان آئوٽ پُٽ پن 3 تي اي |
| وزن | 17.3 آونس (0.49 ڪلوگرام) |
| طول و عرض (L x W x H) | 7.37 x 2.2 x 2.2 انچ (18.72 x 5.59 x 5.59 سينٽي) |
| مواد | Mylar diaphragm |
| ڪنيڪٽر جو قسم | ايڪس ايل آر |
Image 6.1: Typical Frequency Response of the Shure KSM32.
Image 6.2: Typical Cardioid Polar Pattern of the Shure KSM32.
7. سار سنڀال
Proper care and maintenance will ensure the longevity and optimal performance of your KSM32 microphone.
- صفائي: Use a soft, dry cloth to clean the microphone body. Do not use harsh chemicals or abrasive cleaners. For the grille, a soft brush can be used to gently remove dust or debris.
- اسٽوريج: When not in use, store the microphone in its padded carrying bag to protect it from dust, moisture, and physical damage. Avoid storing in extreme temperatures or high humidity.
- سنڀالڻ: Always handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the delicate internal components.
8. مسئلا حل ڪرڻ
If you encounter issues with your Shure KSM32 microphone, refer to the following common troubleshooting steps:
- ڪوبه آواز آئوٽ:
- Ensure 48V phantom power is enabled on your mixer or interface.
- Check all cable connections. Try a different XLR cable to rule out a faulty cable.
- Verify that the input gain on your mixer/interface is set appropriately.
- Confirm the correct input channel is selected on your audio device.
- مسخ ٿيل آواز:
- If the sound is distorted, check if the -15 dB attenuation switch is engaged for loud sources.
- Reduce the input gain on your mixer or interface.
- Ensure the microphone is not placed too close to an extremely loud sound source without proper attenuation.
- Excessive Low-End or Rumble:
- Engage the low-frequency filter switch to reduce unwanted low-end noise or proximity effect.
- Adjust microphone placement to reduce proximity effect (moving the microphone slightly further from the source).
- Intermittent Sound or Noise:
- Inspect XLR cables for damage or loose connections.
- Ensure the microphone is securely mounted and the internal shock mount is functioning correctly to minimize handling noise.
- Check for potential sources of electromagnetic interference (EMI) near the microphone or cables.
If these steps do not resolve the issue, please contact Shure customer support for further assistance.
9. وارنٽي ۽ سپورٽ
Shure products are designed for reliability and performance. For information regarding warranty coverage, service, or technical support for your KSM32 microphone, please refer to the official Shure website or contact Shure customer service directly. Keep your proof of purchase for warranty claims.
شور آفيشل Webسائيٽ: www.shure.com
