3M هيٽ شرينڪ ٽيوبنگ FP-301-رنگ اسورٽمينٽ ڪٽ استعمال ڪندڙ مينوئل

1. تعارف

This manual provides detailed instructions for the proper use and application of the 3M Heat Shrink Tubing FP-301-Color Assortment Kit. This kit offers a versatile selection of thin-wall heat shrink tubing designed for various electrical, physical, and chemical applications. It is intended for industrial and occupational use only.

2. پراڊڪٽ ختمview

The 3M FP-301 Heat Shrink Tubing Kit is a comprehensive assortment of flexible polyolefin heat shrink tubing. It is engineered to provide balanced electrical, physical, and chemical properties, making it suitable for a wide range of industrial and military applications. The tubing features a 2:1 shrink ratio and is rated for 600V applications, offering effective insulation and moisture-seal protection.

اهم خاصيتون:

• قابل اعتماد ڪارڪردگي: Maintains balanced electrical, physical, and chemical properties for diverse industrial and military uses.
• بنيادي استعمال: Ideal for shrink-fit electrical insulation over cable splices and terminations.
• گهڻن ايپليڪيشنون: Suitable for lightweight wire harness covering, wire marking, wire bundling, and component packaging.
• شعله تابڪار: Most colors are self-extinguishing and meet UL 224 All-Tubing Flame Test (Clear tubing is an exception).
• صنعتي استعمال: Designed exclusively for industrial/occupational use; not for consumer sale or use.

Image 1: The 3M Heat Shrink Tubing FP-301-Color Assortment Kit, showing various sizes and colors of tubing in an organized case.

3. سيٽ اپ ۽ تنصيب

Proper installation ensures optimal performance and longevity of the heat shrink tubing. Follow these general guidelines for setup and application.

تياري:

1. Select Tubing Size: Choose a tube with an expanded diameter large enough to fit over the component or wire bundle, but small enough to shrink down to a snug fit. The FP-301 tubing has a 2:1 shrink ratio.
2. ڪٽڻ جي ڊيگهه: Cut the heat shrink tubing to the desired length, ensuring it covers the area requiring insulation or protection.
3. صاف سطح: Ensure the surface of the wire or component is clean, dry, and free from oils or contaminants for best adhesion and insulation.

درخواست جا مرحلا:

4. Position Tubing: Slide the cut piece of heat shrink tubing over the wire splice, termination, or component to be covered. Center it over the area.
5. گرمي لاڳو ڪريو: Using a heat gun or other controlled heat source, apply heat evenly to the tubing. Begin heating from the center of the tubing and work outwards towards the ends.
6. Observe Shrinkage: The tubing will begin to shrink and conform tightly to the shape of the underlying component. Continue applying heat until the tubing is uniformly shrunk and there are no loose areas or air bubbles. The material will become rigid and secure once cooled.
7. ٿڌي ڪريو: Allow the tubing to cool completely before handling or subjecting it to stress.

Image 2: Illustrates the application of heat shrink tubing for shrink-fit protection and strain relief on wires and solder joints.

Image 3: Shows the versatility of the heat shrink tubing, balancing electrical, physical, and chemical properties for various industrial and military applications.

Image 4: Depicts the tubing's utility for lightweight wire-harness coverings, fire-resistant coverings, and wire bundling.

4. آپريٽنگ ھدايتون

The 3M FP-301 heat shrink tubing is designed for reliable operation within specified parameters.

• جلدtagاي درجه بندي: This tubing provides insulation for applications rated up to 600V.
• آپريٽنگ گرمي پد: The tubing is designed to operate effectively within a temperature range of -67°F to 275°F (-55°C to 135°C).
• Shrink Temperature: The recommended minimum shrink temperature is 212°F (100°C).
• شعاع جي مزاحمت: Most colors are self-extinguishing, meeting UL 224 All-Tubing Flame Test standards. Clear tubing does not meet this specific flame test.

Image 5: Details the operating temperature range of the 3M FP-301 heat shrink tubing, from -67°F to 275°F (-55°C to 135°C).

5. مينٽيننس ۽ اسٽوريج

To ensure the longevity and effectiveness of your 3M Heat Shrink Tubing, proper maintenance and storage are recommended.

• اسٽوريج: Store the tubing in its original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
• سنڀالڻ: ڪري کان پاسو ڪريوasing or sharply bending the tubing before application, as this may affect its shrinking properties.
• صفائي: Keep the tubing free from dust, dirt, and moisture to prevent contamination during application.

6. مسئلا حل ڪرڻ

If you encounter issues during the application of the heat shrink tubing, consider the following:

• Incomplete Shrinkage: Ensure sufficient and even heat is applied. A heat gun with adjustable temperature control is recommended. Apply heat from the center outwards.
• Uneven Shrinkage: This can occur if heat is not applied uniformly. Rotate the component or move the heat source consistently to ensure even heat distribution.
• Tubing Too Loose After Shrinkage: The initial tubing size selected might be too large for the component. Refer to the specifications for appropriate sizing based on the 2:1 shrink ratio.
• Damage During Heating: Excessive heat or prolonged exposure to heat can damage the tubing or the underlying component. Use appropriate heat settings and avoid direct flame contact.

7. وضاحتون

Detailed specifications for the 3M FP-301 Heat Shrink Tubing Kit are provided below.

• برانڊ: 3M
• ماڊل نمبر: 3M 37677 (FP-301)
• مواد: Flexible Polyolefin
• رنگ: Assorted (Black, White, Clear, Red, Blue, Yellow, Green)
• Shrink Ratio: 2:1
• جلدtagاي درجه بندي: 600V
• آپريٽنگ درجه حرارت جي حد: -67°F کان 275°F (-55°C کان 135°C)
• انسٽاليشن جو قسم: Heat-Shrink
• پيداوار جي ماپ: 12.5 x 11.3 x 7.4 انچ (ڪٽ پيڪنگنگ)
• وزن: 1.3 Pounds (Kit packaging)
• سرٽيفڪيشن: UL Listed, SAE-AMS-DTL-23053/5 (Class 1, 2), AMS-3636, AMS-3637, ABS, CSA Certified, RoHS 2011/65/EU Compliant.

Kit Contents (133 Tubes Total):

Image 6: Displays the various certifications met by the 3M FP-301 heat shrink tubing, including UL, SAE-AMS-DTL, AMS, ABS, CSA, and RoHS compliance.

8. حفاظتي معلومات ۽ قانوني دستبرداري

اهم اطلاع: 3M صنعتي ۽ پيشه ورانه پراڊڪٽس ڪم جي جڳهه تي استعمال لاءِ تربيت يافته صنعتي ۽ پيشه ورانه گراهڪن کي وڪري لاءِ ارادو، ليبل ٿيل ۽ پيڪ ٿيل آهن. جيستائين لاڳو ٿيل پراڊڪٽ پيڪنگنگ يا لٽريچر تي خاص طور تي بيان نه ڪيو ويو هجي، اهي پراڊڪٽس صارفين کي وڪري يا استعمال لاءِ ارادو، ليبل ٿيل يا پيڪ ٿيل نه آهن (مثال طور، گهر، ذاتي، پرائمري يا سيڪنڊري اسڪول، تفريحي/راندين، يا ٻين استعمالن لاءِ جيڪي لاڳو ٿيل پراڊڪٽ پيڪنگنگ يا لٽريچر ۾ بيان نه ڪيا ويا آهن)، ۽ انهن کي لاڳو ٿيل صحت ۽ حفاظت جي ضابطن ۽ معيارن (مثال طور، US OSHA، ANSI) جي تعميل ۾ چونڊيو ۽ استعمال ڪيو وڃي، انهي سان گڏ سڀئي پراڊڪٽ لٽريچر، صارف هدايتون، ڊيڄاريندڙ، ۽ ٻيون حدون، ۽ صارف کي ڪنهن به يادگيري، فيلڊ ايڪشن، يا ٻين پراڊڪٽ استعمال جي نوٽيس تحت گهربل ڪا به ڪارروائي ڪرڻ گهرجي. 3M صنعتي ۽ پيشه ورانه پراڊڪٽس جو غلط استعمال زخم، بيماري، موت، يا ملڪيت کي نقصان پهچائي سگھي ٿو. پراڊڪٽ جي چونڊ ۽ استعمال ۾ مدد لاءِ، پنهنجي سائيٽ تي حفاظتي پيشه ور، صنعتي حفظان صحت، يا ٻين موضوع جي ماهر سان صلاح ڪريو. اضافي پراڊڪٽ جي معلومات لاءِ، دورو ڪريو www.3M.com.

Always use appropriate personal protective equipment (PPE) when working with heat sources and electrical components. Ensure adequate ventilation when applying heat to the tubing.

9. وارنٽي ۽ سپورٽ

For specific warranty information or technical support regarding the 3M Heat Shrink Tubing FP-301-Color Assortment Kit, please refer to the official 3M webسائيٽ تي وڃو يا سڌو سنئون 3M ڪسٽمر سروس سان رابطو ڪريو.

You can find more information and contact details on the official 3M webسائيٽ: www.3M.com.