OSRAM Sylvania 54507 HP600 Projector Light Bulb User Manual

پيداوار ختمview

This manual provides essential information for the safe and effective use of the OSRAM Sylvania 54507 HP600 Projector Light Bulb. This bulb is a 575-watt, 115-volt halogen lamp featuring a G9.5 Medium Bipin base and a T6 shape. It has a rated life of 300 hours, a color temperature of 3250K, and a C-13D filament with a clear finish.

Image: The OSRAM Sylvania 54507 HP600 Projector Light Bulb, showcasing its T6 shape and G9.5 base.

سيٽ اپ جون هدايتون

Proper installation is crucial for the performance and longevity of your projector bulb. Always ensure the projector is powered off and unplugged before beginning installation.

1. حفاظت پهريون: Turn off the projector and unplug it from the power source. Allow the projector and the old bulb to cool down completely before handling. Hot bulbs can cause severe burns.
2. Locate Bulb Compartment: ايل کي ڳولڻ ۽ کولڻ لاءِ پنهنجي پروجيڪٽر جي مخصوص يوزر مينوئل جو حوالو ڏيو.amp compartment. This usually involves removing a cover secured by screws.
3. پراڻو بلب هٽايو: Carefully disconnect any wiring and unfasten the old bulb assembly. Handle the old bulb with care, as it may be fragile.
4. نئون بلب لڳايو: Gently insert the new OSRAM Sylvania 54507 HP600 bulb into the projector's lamp هائوسنگ. Avoid touching the glass portion of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use a clean cloth or gloves if necessary. Ensure the G9.5 bipin base pins align correctly with the socket.
5. Secure Bulb and Compartment: Fasten the bulb assembly securely and close the lamp compartment cover. Ensure all screws are tightened to prevent dust ingress and ensure proper cooling.
6. پاور آن: Plug the projector back into the power source and turn it on. The new bulb should illuminate.

Image: Diagram illustrating the dimensions of the G9.5 bipin base, showing pin spacing and overall base measurements for compatibility reference.

آپريٽنگ هدايتون

Once installed, the OSRAM Sylvania 54507 HP600 bulb operates as part of your projector system. Follow these general guidelines for optimal performance:

• پاور سائيڪل: Turn on the projector using its power button. Allow the bulb to warm up to full brightness, which may take a few moments.
• کولڻ وارو دور: After use, turn off the projector and allow it to complete its internal cool-down cycle before unplugging or moving it. This protects the bulb from thermal shock and extends its lifespan.
• بار بار آن/آف ڪرڻ کان پاسو ڪريو: Minimize turning the projector on and off rapidly, as this can reduce the bulb's rated life.

سار سنڀال

Regular maintenance of your projector system helps ensure the longevity and performance of the OSRAM Sylvania 54507 HP600 bulb.

• Projector Filter Cleaning: Periodically clean or replace your projector's air filters as recommended by the projector manufacturer. Clogged filters can lead to overheating, which significantly shortens bulb life.
• بلب مٽائڻ: The OSRAM Sylvania 54507 HP600 has a rated life of 300 hours. Monitor your projector's lamp hour counter and replace the bulb when it approaches its end-of-life or when brightness noticeably diminishes.
• اسٽوريج: If storing a spare bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.

مشڪلاتون

If you encounter issues with your projector bulb, consider the following common problems and solutions:

• بلب نه روشني:
  • طاقت چيڪ ڪريو: پڪ ڪريو ته پروجيڪٽر صحيح طرح سان پلگ ان ٿيل آهي ۽ بجلي حاصل ڪري رهيو آهي.
  • ٻيهر انسٽاليشن: Power off and unplug the projector. Re-open the lamp compartment and ensure the bulb is seated correctly and all connections are secure.
  • زندگي جي پڄاڻي: If the bulb has reached or exceeded its rated life (300 hours), it may have failed. Replace with a new bulb.
  • Projector Error: Consult your projector's manual for specific error codes related to lamp ناڪامي
• مدھم يا چمڪندڙ روشني:
  • Bulb Nearing End of Life: Dimness or flickering often indicates the bulb is nearing the end of its operational lifespan.
  • گهڻو گرم ٿيڻ: Ensure projector vents are clear and filters are clean to prevent overheating.

If these steps do not resolve the issue, contact customer support or a qualified technician.

پيداوار جي وضاحت

Key technical specifications for the OSRAM Sylvania 54507 HP600 Projector Light Bulb:

وارنٽي ڄاڻ

Specific warranty terms for the OSRAM Sylvania 54507 HP600 Projector Light Bulb are typically provided by the manufacturer, OSRAM, or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your purchase or visit the official OSRAM webسائيٽ.

ڪسٽمر سپورٽ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact OSRAM customer support or the retailer from whom you purchased the bulb.

• OSRAM Store: توهان وڌيڪ معلومات ۽ رابطي جي تفصيل سرڪاري ويب سائيٽ تي ڳولي سگهو ٿا ايميزون تي OSRAM اسٽور.
• وڪرو ڪندڙ سپورٽ: Contact the seller directly for purchase-specific support.