1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of the Sloan Regal 186 Exposed Manual Urinal Flushometer, Model 3082675. This flushometer is designed for commercial urinal applications, featuring a 1.0 GPF (Gallons Per Flush) manual flush valve with a non-hold-open handle. It is ADA compliant and constructed with high copper, low zinc brass castings for dezincification resistance, ensuring durability and hygienic operation.
2. حفاظت جي ڄاڻ
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or injury.
- ڪنهن به انسٽاليشن يا سار سنڀال شروع ڪرڻ کان اڳ پڪ ڪريو ته مکيه پاڻي جي فراهمي بند آهي.
- مناسب ذاتي حفاظتي سامان (پي پي اي) پائڻ، جهڙوڪ حفاظتي چشما ۽ دستانا.
- All plumbing work should comply with local codes and regulations.
- ڪنيڪشن کي وڌيڪ تنگ نه ڪريو، ڇاڪاڻ ته اهو حصن کي نقصان پهچائي سگھي ٿو.
- If you are unsure about any part of the installation or repair process, consult a qualified plumber.
3. پيڪيج مواد
انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن.
- Sloan Regal 186 Exposed Manual Urinal Flushometer (Model 3082675)
- سوٽ سولر اڊاپٽر
- ڍڪڻ واري ٽيوب
- ويڪيوم برڪر فلش ڪنيڪشن
- 3/4" I.P.S. Screwdriver Bak-Chek Angle Stop
- ڪنٽرول اسٽاپ پلگ
- ڪاسٽ وال فلانج سيٽ اسڪرو سان
- ADA مطابق ڌاتو اوسيليٽنگ نان هولڊ-اوپن هينڊل
4. سيٽ اپ ۽ انسٽاليشن
This section outlines the general steps for installing the flushometer. Refer to detailed plumbing diagrams for specific configurations.
4.1. Prepare Water Supply
- Turn off the main water supply to the fixture.
- Flush the urinal to relieve any remaining water pressure.
- Ensure the water supply pipe is properly sized (typically 1-1/2" X 3/4" X 9" for the sweat kit).
4.2. Install Bak-Chek Angle Stop
- Thread the 3/4" I.P.S. screwdriver Bak-Chek angle stop onto the water supply pipe.
- Use pipe sealant or Teflon tape on threads to ensure a watertight seal.
- محفوظ طور تي سخت ڪريو، پر وڌيڪ تنگ نه ڪريو.
4.3. Mount Wall Flange
- Position the cast wall flange over the angle stop.
- Secure the wall flange to the wall using appropriate fasteners (not included) and the provided set screw.
4.4. Connect Flushometer Body
- Attach the flushometer body to the angle stop.
- Connect the vacuum breaker flush connection to the urinal's top spud.
- پڪ ڪريو ته سڀئي ڪنيڪشن تنگ ۽ صحيح طور تي بند ٿيل آهن.
- Install the sweat solder adapter and cover tube as required for your specific plumbing setup.
4.5. فائنل چيڪ
- آهستي آهستي مکيه پاڻي جي فراهمي کي چالو ڪريو.
- ليڪ لاء سڀ ڪنيڪشن چيڪ ڪريو.
- Adjust the control stop plug to regulate water flow as needed.
5. آپريٽنگ هدايتون
The Sloan Regal 186 Flushometer features a simple manual operation.
5.1. Flushing the Urinal
- Locate the ADA compliant metal oscillating non-hold-open handle on the flushometer.
- Push the handle down firmly and release. The non-hold-open design ensures a consistent 1.0 GPF flush, promoting water conservation.
- The flushometer will automatically reset after the flush cycle is complete.
6. سار سنڀال
Regular maintenance ensures optimal performance and longevity of your flushometer.
6.1. صفائي
- Clean the exterior of the flushometer with a mild, non-abrasive cleaner and a soft cloth.
- Avoid using harsh chemicals or abrasive pads, as these can damage the polished chrome finish.
6.2. Diaphragm and Gasket Inspection
- Periodically inspect the diaphragm and other internal gaskets for wear or damage.
- If leaks or inconsistent flushing occur, these components may need replacement. Refer to Sloan's official service guides for detailed replacement procedures.
6.3. Control Stop Adjustment
- The control stop plug allows for adjustment of water flow. If the flush volume is too low or too high, use a screwdriver to adjust the control stop.
- Turn clockwise to decrease flow, counter-clockwise to increase flow. Adjust incrementally until desired flush is achieved.
7. مسئلا حل ڪرڻ
This section addresses common issues you might encounter with your flushometer.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Flushometer does not flush | Water supply turned off; Clogged internal components; Handle mechanism issue. | Check water supply valve; Inspect and clean diaphragm/bypass; Check handle assembly for obstructions. |
| Continuous flushing or slow closing | Worn or damaged diaphragm; Debris in bypass hole; Improperly seated components. | Replace diaphragm; Clean bypass hole; Reassemble components correctly. |
| Insufficient flush volume | Control stop not fully open; Low water pressure; Partially clogged inlet. | Adjust control stop to increase flow; Check building water pressure; Inspect and clean inlet screen. |
| ڪنيڪشن مان ليڪ ٿيڻ | Loose connections; Damaged gaskets/seals; Improperly applied sealant. | Tighten connections; Replace worn gaskets/seals; Reapply pipe sealant correctly. |
If troubleshooting steps do not resolve the issue, contact Sloan customer support or a qualified plumber.
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 3082675 |
| فلش حجم | 1.0 جي پي ايف (گيلن في فلش) |
| ختم ڪر | پالش ڪروم |
| مواد | Brass (High copper, low zinc castings) |
| فڪسچر ڪنيڪشن | مٿي اسپڊ |
| هٿ جو قسم | Manual, Non-Hold-Open, ADA Compliant Metal Oscillating |
| ويڪيوم بريڪر | شامل |
| Angle Stop | 3/4" I.P.S. Screwdriver Bak-Chek |
| طول و عرض (تقريبن) | 1 x 2 x 3 انچ (پراڊڪٽ طول و عرض) |
| شيءِ جو وزن | 6 پائونڊ |
| سرٽيفڪيشن | ADA |
9. وارنٽي ۽ سپورٽ
9.1. وارنٽي ڄاڻ
The Sloan Regal 186 Exposed Manual Urinal Flushometer (Model 3082675) comes with a 3 سالن جي محدود وارنٽي. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, limitations, and claims, please refer to the official Sloan warranty documentation or contact Sloan customer support.
9.2. ڪسٽمر سپورٽ
For technical assistance, replacement parts, or warranty inquiries, please contact Sloan customer support. Visit the official Sloan webرابطي جي معلومات ۽ اضافي وسيلن لاءِ سائيٽ.
Note: Always provide your product model number (3082675) when contacting support for faster service.
