1. تعارف
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Steinel IS 180-2 Infrared Motion Detector. Designed for both indoor and outdoor applications, this device offers reliable motion detection and automatic light control. Please read these instructions carefully before beginning installation or operation to ensure safe and efficient use.
2. حفاظتي هدايتون
خبردار: Incorrect installation can lead to electric shock, fire, or other hazards. Always ensure that installation is performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Disconnect power at the main circuit breaker before installation or maintenance.
- پراڊڪٽ نه کوليو casing unless specifically instructed. There are no user-serviceable parts inside.
- Ensure the product is securely mounted to prevent it from falling.
- ٻارن کي بجلي جي ڊوائيسز کان پري رکو.
3. پراڊڪٽ ختمview
The Steinel IS 180-2 is an elegant infrared motion detector combining advanced sensor technology with a modern design. It is equipped with two highly sensitive infrared detectors to provide reliable, uninterrupted all-round protection.
شڪل 3.1: سامهون view of the Steinel IS 180-2 Infrared Motion Detector, showcasing its sleek silver finish and integrated sensor lens.
Figure 3.2: The Steinel IS 180-2 package contents, including the motion detector, quick start guide, mounting screws, and a corner wall mount accessory.
Figure 3.3: Key features of the IS 180-2, including its 180° infrared sensor, maximum 12m range, IP54 weather protection, and adjustable time and twilight settings. For an augmented reality view of the product, scan the QR code or visit هي لنڪ.
شڪل 3.4: پوئتي view of the motion detector, illustrating the mounting points and the area for electrical connections.
4. تنصيب ۽ چڙهڻ
The Steinel IS 180-2 is designed for wall mounting and includes a corner wall mount for flexible installation. Ensure the mounting surface is stable and suitable for the device's weight.
4.1 چڙهڻ وارو هنڌ
Choose a location that provides the desired detection coverage. The sensor offers a 180° detection angle and a maximum range of 12 meters. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, direct sunlight).
Figure 4.1: The IS 180-2 mounted on an exterior wall, demonstrating a typical installation scenario.
4.2 ڳولڻ وارو علائقو
The detection zone can be adjusted to suit specific requirements. The sensor provides coverage for areas as large as 200 m².
شڪل 4.2: مٿي view of the 180° detection zone, showing how the sensor covers a broad area in front of a building.
Figure 4.3: Illustration of detection patterns for both flat wall and corner mounting, highlighting the 180° coverage and 12m range.
شڪل 4.4: پاسي view diagram detailing the sensor's detection range, showing its ability to detect movement across various distances and vertical angles.
5. آپريٽنگ هدايتون
The Steinel IS 180-2 operates by detecting infrared radiation (heat) emitted by moving objects. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the connected light source will activate for the set duration.
6. ترميمون
The motion detector features control dials for fine-tuning its operation. These dials are typically located behind the sensor lens or on the underside of the unit.
Figure 6.1: Control dials for adjusting the time and twilight threshold settings of the motion detector.
- وقت جي ترتيب: This dial adjusts how long the light remains on after motion is detected. It can be infinitely varied from approximately 5 seconds to 15 minutes.
- Twilight Threshold: This dial sets the ambient light level at which the sensor becomes active. It can be adjusted from approximately 2 lux (dark) to 2000 lux (daylight).
- پهچ جي ترتيب: The reach of the motion sensor can be set to a maximum of 12 meters or reduced to 5 meters by turning the multi-lens. Shrouds are also provided to limit the detection zone and match it to specific situations, preventing unwanted triggers.
7. سار سنڀال
The Steinel IS 180-2 motion detector requires minimal maintenance. To ensure optimal performance:
- Periodically clean the sensor lens with a soft, damp cloth to remove dust or dirt that may obstruct detection. Do not use abrasive cleaners or solvents.
- Ensure the area around the sensor remains clear of obstructions that could block its field of view or cause false triggers.
- No internal maintenance or lubrication is required.
8. مسئلا حل ڪرڻ
If your Steinel IS 180-2 is not functioning as expected, consult the following table for common issues and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| روشني مسلسل جاري رهي ٿي. | Continuous motion in detection zone; Time setting too long; Wiring fault. | Remove obstructions; Adjust time setting; Check wiring. |
| Light does not switch on. | No power; Twilight setting too high; Sensor lens obstructed; Faulty bulb. | Check power supply; Adjust twilight setting; Clean lens; Replace bulb. |
| False triggers. | Heat sources (e.g., vents, animals); Detection zone too wide. | Relocate sensor; Adjust reach using shrouds or multi-lens. |
9. وضاحتون
Figure 9.1: Technical drawing showing the dimensions of the Steinel IS 180-2 in millimeters.
| خاصيت | تفصيل |
|---|---|
| برانڊ | اسٽينيل |
| ماڊل | IS 180-2 |
| طاقت جو ذريعو | تار ٿيل برقي |
| جلدtage | 230 وولٽ |
| وڌ. مٽائڻ جي صلاحيت | 1000 Watts (Max. 350 W LED) |
| ڳولهي زاويه | 180° |
| وڌ. حد | 12 ميٽر |
| Twilight Setting | 2 - 2000 Lux |
| وقت جي سيٽنگ | 5 سيڪنڊ - 15 منٽ |
| چڙهڻ جو قسم | ڀت جبل |
| تحفظ جي درجه بندي | IP54 |
| شيءِ جو وزن | 170 گرام (تقريبن 6 آونس) |
| پيداوار جي ماپ | 4.72 x 2.99 x 2.2 انچ (تقريبن 120 x 77 x 55 ملي ميٽر) |
10. وارنٽي ۽ سپورٽ
The Steinel IS 180-2 Infrared Motion Detector comes with a 3-year manufacturer's warranty. For warranty claims or technical support, please contact Steinel customer service or visit their official webسائيٽ.
وڌيڪ معلومات لاء، مهرباني ڪري دورو ڪريو: www.steinel.de/garantie
