لا ڪراس ٽيڪنالاجي TX29U-IT 915 MHz وائرليس ٽمپريچر سينسر هدايت نامو

1. پراڊڪٽ ختمview

The La Crosse Technology TX29U-IT is a 915 MHz wireless temperature sensor designed to work with compatible La Crosse Technology wireless temperature stations. It provides remote temperature readings to your display unit using Instant Transmission wireless technology.

اهم خاصيتون:

• 915 MHz transmission for powerful, continuous communication.
• Transmission range up to 330 feet (100 meters).
• موسم جي مزاحمتي ڊيزائن.
• Measures approximately 5 by 1 by 1-1/2 inches.

مطابقت:

This sensor is compatible with specific La Crosse Technology 915 MHz wireless temperature stations. Refer to your display unit's manual or the product packaging for a complete list of compatible models. Examples شامل آهن:

• COMBO8-IT (WS-7394/7013)
• KCOMBO3-IT (WS-9640/9080)
• KCOMBO4-IT (WS-9740/9117)
• WS-9160U-IT (Version 1 only)
• WS-7013U-IT series (including WS-7013-IT-CA)
• WS-7014CH-IT & WS-7017U-IT
• WS-7034U-IT & WS-7034U-IT-CA
• WS-7215U-IT & WS-7394-IT series
• WS-9002U-IT & WS-9021-IT
• WS-9077-IT & WS-9080U-IT
• WS-9117U-IT & WS-9117U-IT-CA
• WS-9153-IT & WS-9611U-IT
• WS-9711U-IT & WS-9780U-IT
• WS-9626U-IT-CA
• WS-9640U-IT, WS-9640U-IT-CA & WS-9650U-IT

This sensor will not function with models not listed above or those that do not utilize 915 MHz Instant Transmission technology.

2. پيڪيج مواد

• TX29U-IT Wireless Temperature Sensor
• وڌندڙ خط
• Screws (typically found within the product manual packaging)

Image: The TX29U-IT sensor shown with its included mounting bracket.

3. سيٽ اپ ۽ تنصيب

To establish proper communication between the sensor and your display unit, follow these steps carefully:

1. شروعاتي جڳھ: Bring both the sensor and the display unit indoors. Place them 3-5 feet apart with no obstructions between them.
2. بيٽرين کي هٽايو: Remove all batteries from both the sensor and the display unit.
3. صاف ياداشت: On the display unit, press any button at least 20 times to clear its memory. Verify that the display is blank before proceeding.
4. Install Sensor Batteries: Using good quality alkaline batteries (2 AA, not included), install them into the remote sensor. Ensure correct polarity according to the diagrams in the battery compartment.
5. Install Display Unit Batteries: Without pressing any buttons, reinstall batteries into the display unit, observing correct polarity.
6. ڪنيڪشن قائم ڪريو: Do not press any buttons on either unit for at least 15 minutes after installing batteries. This allows the units to establish a stable connection. An outdoor temperature reading should appear on your display unit.
7. ٻاهرين جڳهه: Once the connection is established, you can place your outdoor sensor in its desired location.

Sensor Placement Guidelines:

• بهترين جڳھ: Choose a shaded area, away from direct sunlight, to ensure accurate temperature readings. Direct sunlight can cause artificially high readings.
• عناصر کان تحفظ: While weather-resistant, avoid locations where the sensor will be heavily rained on or submerged in water. An overhang or sheltered spot is ideal.
• سگنل ٽرانسميشن: Ensure there are no major obstructions like large metal objects or dense foliage directly between the sensor and the display unit, as these can interfere with the 915 MHz signal.
• چڙهڻ: Use the provided mounting bracket and screws to securely attach the sensor to a wall or post.

Image: The TX29U-IT sensor mounted on an exterior wall, typically under an overhang for protection.

4. بيٽري لڳائڻ ۽ مٽائڻ

The TX29U-IT sensor requires 2 AA alkaline batteries (not included).

1. سينسر جي پوئين پاسي بيٽري جي ڪمپارٽمينٽ جو ڍڪ کوليو.
2. Insert two fresh AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
3. بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.
4. When replacing batteries in the sensor, it is recommended to also remove and reinstall batteries in the display unit, following the full setup procedure (Section 3) to re-establish a strong connection.

تصوير: سامهون view of the TX29U-IT sensor, showing its compact design.

5. آپريشن

Once successfully paired with your compatible La Crosse Technology display unit, the TX29U-IT sensor will continuously transmit temperature data. The display unit will then show the outdoor temperature reading. No further direct interaction with the sensor is typically required during normal operation.

6. سار سنڀال

• بيٽري جي زندگي: Battery life varies depending on temperature conditions and battery quality. Replace batteries when the display unit indicates a low battery for the sensor or if readings become intermittent.
• صفائي: سينسر کي نرم، ڊي سان صاف ڪريوamp cloth if it becomes dirty. Avoid using abrasive cleaners or solvents.
• ماحولياتي تحفظ: Ensure the sensor remains in a location protected from extreme weather conditions beyond its weather-resistant capabilities, such as prolonged heavy rain or direct, intense sunlight.

7. مسئلا حل ڪرڻ

If you experience issues with your TX29U-IT sensor, consider the following:

• No Temperature Reading / Lost Connection:
  • Perform the full setup procedure outlined in Section 3. This involves removing batteries from both the sensor and display unit, clearing the display unit's memory, and reinstalling batteries in sequence.
  • Ensure both units are within the effective transmission range (up to 330 feet) and that there are no significant obstructions.
  • Check battery levels in both the sensor and the display unit. Replace with fresh alkaline batteries if needed.
• غلط درجه حرارت جي پڙهائي:
  • Verify the sensor's placement. It should be in a shaded area, away from direct sunlight, heat sources, or reflective surfaces that could affect temperature readings.
  • Ensure the sensor is not exposed to direct rain or moisture that could temporarily affect its internal components.
• مختصر ٽرانسميشن رينج:
  • Relocate the sensor or display unit to minimize interference from large metal objects, thick walls, or dense trees.
  • Ensure fresh batteries are installed in both units.

8. وضاحتون

9. سپورٽ ۽ وارنٽي

La Crosse Technology products are designed with quality and reliability in mind. For technical assistance, resources, or video tutorials, please visit the official La Crosse Technology support website or contact their USA-based support team. Specific warranty details are typically provided with the product packaging or available on the manufacturer's webسائيٽ.

وڌيڪ معلومات لاءِ، توهان دورو ڪري سگهو ٿا La Crosse Technology Store.