Alpine SPS-600 6.5-inch Coaxial Car Speaker Instruction Manual

1. تعارف

The Alpine SPS-600 is a 6.5-inch 2-way coaxial car speaker system designed to enhance your vehicle's audio experience. These speakers feature a robust design for clear sound reproduction and reliable performance. Key specifications include a power handling capacity of 80 Watts RMS (240 Watts Peak), a frequency response range of 70Hz to 22kHz, and a sensitivity of 88dB /W(1m).

2. حفاظت جي ڄاڻ

• پيشه ورانه تنصيب جي سفارش ڪئي وئي آهي: If you are unfamiliar with car audio wiring and installation, it is recommended to seek professional assistance to prevent damage to the speakers or your vehicle.
• بيٽري ختم ڪريو: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical hazards.
• مناسب وائرنگ: Ensure all wiring connections are secure and correctly polarized. Incorrect wiring can lead to speaker damage or poor sound quality.
• حفاظتي حفاظت: Securely mount the speakers to prevent them from becoming loose during vehicle operation, which could cause injury or damage.
• زيادتي کان پاسو ڪريو: Do not exceed the speaker's rated power handling capacity (80 Watts RMS / 240 Watts Peak) to prevent damage.
• وينٽيليشن: Ensure adequate ventilation around the speakers and any connected ampوڌيڪ گرم ٿيڻ کان بچڻ لاءِ لائفائر.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Alpine SPS-600 6.5-inch Coaxial Speakers (Pair)
• Speaker Grilles (if included)
• چڙهڻ وارا اسڪرو ۽ ڪلپس
• Speaker Wire (if included)
• انسٽاليشن ٽيمپليٽ (جيڪڏهن شامل هجي)

4. سيٽ اپ ۽ تنصيب

This section outlines the general steps for installing your Alpine SPS-600 speakers. Specific vehicle requirements may vary.

4.1. تياري

1. پنهنجي گاڏي جي بيٽري جي منفي ٽرمينل کي ڌار ڪريو.
2. Remove the existing speakers or trim panels to access the speaker mounting locations.
3. Inspect the mounting location for adequate depth and clearance for the new speakers. The SPS-600 speakers have a 6.5-inch woofer diameter and a 2.54 cm tweeter diameter.

4.2. اسپيڪر لڳائڻ

The Alpine SPS-600 speakers are designed for coaxial car mounting.

1. Place the speaker in the desired mounting location. If using an installation template, mark and cut the opening as necessary.
2. Align the speaker's mounting holes with the vehicle's speaker mounts. If new holes are required, drill pilot holes carefully to avoid damaging vehicle components.
3. Secure the speaker using the provided mounting screws. Do not overtighten.

سامهون view of the Alpine SPS-600 6.5-inch coaxial car speaker, showcasing ان جي ڊيزائن ۽ اجزاء.

4.3. وائرنگ ڪنيڪشن

The SPS-600 speakers utilize wired coaxial connectivity.

1. Connect the positive (+) terminal of the speaker to the positive (+) speaker output wire from your head unit or ampوierيڪ زنده
2. Connect the negative (-) terminal of the speaker to the negative (-) speaker output wire from your head unit or ampوierيڪ زنده
3. پڪ ڪريو ته سڀئي ڪنيڪشن تنگ ۽ موصل آهن ته جيئن شارٽ سرڪٽ کان بچي سگهجي.

4.4. آخري مرحلو

1. Reinstall any removed trim panels or grilles.
2. گاڏي جي منفي بيٽري ٽرمينل کي ٻيهر ڳنڍيو.
3. Test the speaker functionality.

5. آپريٽنگ هدايتون

Once installed, the Alpine SPS-600 speakers operate as part of your vehicle's audio system. They are designed for stereo audio output.

1. پاور آن: Turn on your vehicle's head unit or audio receiver.
2. ذريعو چونڊ: Select your desired audio source (e.g., radio, CD, MP3 player, smartphone connected to the head unit).
3. حجم جي ترتيب: آهستي آهستي آواز کي آرامده ٻڌڻ جي سطح تائين وڌايو. تمام گهڻي آواز کان پاسو ڪريو جيڪو بگاڙ جو سبب بڻجندو آهي، ڇاڪاڻ ته اهو اسپيڪر کي نقصان پهچائي سگهي ٿو.
4. آڊيو سيٽنگون: Adjust bass, treble, balance, and fader settings on your head unit to optimize sound quality according to your preference. The SPS-600 features a bass boost capability, which can be further enhanced through head unit settings or an external ampوierيڪ زنده

6. سار سنڀال

Proper maintenance ensures the longevity and performance of your Alpine SPS-600 speakers.

• صفائي: Use a soft, dry cloth to gently wipe dust and debris from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
• ماحولياتي تحفظ: While designed for vehicle use, avoid exposing speakers to excessive moisture or extreme temperatures. These speakers are not water-resistant.
• باقاعده چڪاس: Periodically check mounting screws for tightness and wiring connections for security.

7. مسئلا حل ڪرڻ

If you encounter issues with your Alpine SPS-600 speakers, refer to the following common troubleshooting steps:

8. وضاحتون

9. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات ۽ ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري سرڪاري الپائن جو حوالو ڏيو website or contact Alpine customer service directly. Keep your proof of purchase for warranty claims.

الپائن ڪسٽمر سپورٽ: Refer to your product packaging or the official Alpine webجديد ترين رابطي جي معلومات لاءِ سائيٽ.