تعارف
This manual provides essential instructions for the proper setup, operation, maintenance, and troubleshooting of your SCHWALBE Marathon Plus HS 348 Road Bike Tire. Please read this manual thoroughly before installation and use to ensure safety and optimal performance.
پيداوار جون خاصيتون
- SmartGuard Protection: An effective puncture protection belt made from highly elastic special rubber.
- Endurance Compound: Designed for maximum durability and longevity.
- Reflex Sidewall: Reflective strip for enhanced visibility in low light conditions.
- Wire Beaded: Traditional tire bead construction for secure fit on the rim.
- ماپ: 700 x 25mm, suitable for road bikes.
Image: SCHWALBE Marathon Plus HS 348 Road Bike Tire, showing the tread pattern and reflective sidewall.
سيٽ اپ ۽ تنصيب
حفاظت ۽ ڪارڪردگيءَ لاءِ صحيح تنصيب تمام ضروري آهي. جيڪڏهن توهان ڪنهن به قدم بابت پڪ نه آهيو، ته هڪ پيشيور سائيڪل ميڪينڪ سان صلاح ڪريو.
- ڦيٿي تيار ڪريو: Ensure your wheel rim is clean and free from any sharp edges or debris. Check the rim tape for proper coverage of spoke holes.
- Install One Tire Bead: Place one side of the tire bead onto the rim. Start opposite the valve hole and work your way around.
- اندروني ٽيوب داخل ڪريو: Lightly inflate the inner tube to give it shape. Insert the valve stem through the valve hole in the rim. Carefully tuck the inner tube inside the tire, ensuring it is not twisted.
- Install Second Tire Bead: Starting opposite the valve, push the second tire bead onto the rim. Use tire levers if necessary, but be careful not to pinch the inner tube. Ensure the inner tube is not caught between the tire bead and the rim.
- سيٽنگ چيڪ ڪريو: Before fully inflating, check that the tire is evenly seated on the rim. The bead line on the tire should be visible and consistent around the entire rim on both sides.
- Inflate to Recommended Pressure: Inflate the tire to the pressure range indicated on the tire sidewall. Do not exceed the maximum pressure.
تصوير: هڪ ڪراس سيڪشن view of the SCHWALBE Marathon Plus tire, highlighting the SmartGuard puncture protection layer (blue section) beneath the tread.
آپريٽنگ ھدايتون
The SCHWALBE Marathon Plus HS 348 tire is designed for road cycling. Adhere to the following guidelines for safe and effective use:
- ٽائر پريشر: Always maintain tire pressure within the recommended range printed on the tire sidewall. Incorrect pressure can affect handling, comfort, and puncture resistance.
- سواري جا شرط: While highly puncture-resistant, no tire is completely impervious. Exercise caution when riding over sharp objects, glass, or debris.
- Reflective Sidewall: The Reflex sidewall enhances visibility. Ensure it is clean and unobstructed, especially when riding in low-light conditions.
سار سنڀال
Regular maintenance extends the life of your tires and ensures safe riding.
- باقاعده چڪاس ڪريو: Before each ride, visually inspect the tire for cuts, embedded objects, or excessive wear. Remove any small debris carefully.
- دٻاءُ چيڪ ڪريو: Check tire pressure at least once a week, or before every significant ride. Tires naturally lose air over time.
- ٽائر صاف ڪريو: Clean your tires with water and a mild soap solution. Avoid harsh chemicals that can degrade rubber.
- اسٽوريج: Store your bicycle in a cool, dry place away from direct sunlight and ozone-producing equipment (e.g., electric motors) to prevent premature aging of the rubber.
تصوير: ويجهو تصوير view of the SCHWALBE Marathon Plus tire's robust tread pattern, designed for durability and grip.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| بار بار پنڪچر | Underinflation, embedded debris, worn tire. | Check and maintain correct tire pressure. Inspect tire for embedded objects and remove. Replace tire if excessively worn. |
| Tire Wobbles/Uneven Seating | Improper installation, pinched inner tube. | Deflate tire, re-seat beads, ensure inner tube is not pinched. Re-inflate slowly while checking seating. |
| Cracks in Sidewall/Tread | Aging rubber, exposure to harsh conditions. | This indicates the tire is nearing the end of its lifespan. Replace the tire immediately to prevent failure. |
وضاحتون
- ماڊل: Marathon Plus HS 348
- ماپ: 700 x 25mm
- ٽائر جو قسم: Clincher, Wire Beaded
- Puncture Protection: اسمارٽ گارڊ
- مرڪب: برداشت
- پاسي واري ڀت: Reflex (Reflective)
- مواد: رٻڙ
- شيء جو وزن: تقريبن 0.6 ڪلوگرام
- ٺاهيندڙ حصو نمبر: TYS11100766
وارنٽي ۽ سپورٽ
SCHWALBE products are manufactured to high-quality standards. This product comes with an extended warranty. For specific warranty terms, conditions, and to register your product, please visit the official SCHWALBE webسائيٽ تي وڃو يا انهن جي ڪسٽمر سپورٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
For further assistance or technical support, please refer to the contact information provided on the SCHWALBE official website or consult your local authorized dealer.
Note: Improper installation, misuse, or lack of maintenance may void your warranty.
