Technoline WS 6810 amber

Technoline WS 6810 Weather Station User Manual

Model: WS 6810 amber

1. پراڊڪٽ ختمview

The Technoline WS 6810 amber Weather Station is a sophisticated device designed to provide accurate indoor and outdoor temperature readings, precise timekeeping via DCF-77 radio control, and convenient alarm functions. Its modern design with a warm amber LED display and black high-gloss finish integrates seamlessly into any contemporary home environment. This manual provides detailed instructions for setting up, operating, and maintaining your weather station.

Technoline WS 6810 Weather Station front view with amber LED display showing time and temperatures

شڪل 1.1: سامهون view of the Technoline WS 6810 Weather Station, displaying indoor and outdoor temperatures, current time, and alarm indicators.

2. پيڪيج مواد

مھرباني ڪري پيڪيج جي مواد کي احتياط سان چيڪ ڪريو. جيڪڏھن ڪا به شيءِ غائب يا خراب آھي، ته فوري طور تي پنھنجي پرچون ڪندڙ سان رابطو ڪريو.

نوٽ: 3 x AAA Micro LR03 batteries for main unit backup and 2 x AAA Micro LR03 batteries for the outdoor sensor are شامل نه آهي ۽ الڳ الڳ خريد ڪيو وڃي.

Technoline WS 6810 Weather Station main unit and TX96 outdoor sensor

Figure 2.1: The Technoline WS 6810 main unit alongside its TX96 outdoor sensor.

3. اهم خاصيتون

4. سيٽ اپ گائيڊ

4.1. مکيه يونٽ کي طاقت ڏيڻ

  1. Connect the provided power supply unit to the DC IN port on the back of the WS 6810 main unit.
  2. Plug the power adapter into a standard 220V electrical outlet. The display will illuminate.
  3. او يو دوران بيڪ اپ پاور لاءِtages, insert 3 x AAA Micro LR03 batteries (not included) into the battery compartment on the back of the main unit, observing polarity (+/-).

4.2. Installing Batteries in the Outdoor Sensor (TX96)

  1. Open the battery compartment on the back of the TX96 outdoor sensor.
  2. Insert 2 x AAA Micro LR03 batteries (not included), ensuring correct polarity.
  3. بيٽري جي ڪمري کي محفوظ طور تي بند ڪريو.

4.3. Initial Synchronization and Sensor Placement

  1. Place the outdoor sensor within effective transmission range (typically up to 30 meters in open air) of the main unit. Avoid placing it near large metal objects, electrical appliances, or direct sunlight.
  2. The main unit will automatically attempt to receive the DCF-77 radio signal for time synchronization and connect with the outdoor sensor. This process may take several minutes. A signal icon will appear on the display once synchronization is successful.
  3. If the outdoor temperature does not appear after a few minutes, press the "SENSOR" button on the main unit to manually initiate a search for the outdoor sensor.

4.4. Time Zone Setting (if required)

If you are in a region where the DCF-77 signal's standard time differs from your local time (e.g., outside Central European Time), you may need to adjust the time zone.

  1. In normal time display mode, press and hold the "SET" button until the time zone offset flashes.
  2. Use the "+" or "-" buttons to adjust the time zone offset in ±1 hour increments.
  3. Press "SET" again to confirm and exit.
پاسي view of Technoline WS 6810 Weather Station showing control buttons on top

شڪل 4.1: مٿي view of the WS 6810, highlighting the control buttons for setup and operation.

5. آپريٽنگ هدايتون

5.1. معلومات ڏيکاريو

The large LED display shows the following information:

5.2. الارم ترتيب ڏيڻ

The WS 6810 features two independent alarms (ALM1 and ALM2).

  1. Press the "ALARM" button repeatedly to cycle through ALM1, ALM2, and normal time display.
  2. When ALM1 or ALM2 is displayed, press and hold the "ALARM" button until the alarm time flashes.
  3. Use the "+" or "-" buttons to adjust the hour, then press "ALARM" to confirm and move to minutes.
  4. Use the "+" or "-" buttons to adjust the minutes, then press "ALARM" to confirm.
  5. To activate/deactivate an alarm, select ALM1 or ALM2 display, then press the "+" button. An alarm icon will appear/disappear.

5.3. اسنوز فنڪشن

When an alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes.

5.4. ڊسپلي جي روشني کي ترتيب ڏيڻ

Press the "SNOOZE/LIGHT" button (when no alarm is sounding) to toggle between the two available brightness levels for the LED display.

5.5. Viewing Min/Max Temperatures

Press the "MIN/MAX" button to cycle through the current, maximum, and minimum recorded indoor and outdoor temperatures. To reset the min/max records, press and hold the "MIN/MAX" button while the min/max values are displayed.

6. سار سنڀال

7. مسئلا حل ڪرڻ

مسئلوممڪن سببحل
مکيه يونٽ تي ڪابه ڊسپلي ناهي.Power adapter not connected or faulty; batteries (backup) are dead or incorrectly inserted.Ensure power adapter is securely plugged in. Check and replace backup batteries, ensuring correct polarity.
Outdoor temperature not displayed or inaccurate.ٻاهرين سينسر جون بيٽريون ختم ٿي ويون آهن؛ سينسر حد کان ٻاهر آهي؛ مداخلت؛ سينسر جوڙو نه آهي.Replace outdoor sensor batteries. Move sensor closer to the main unit. Avoid placing near electronics. Press "SENSOR" button on main unit to re-establish connection.
Time is incorrect or not synchronizing.Weak DCF-77 signal; interference; incorrect time zone setting.Relocate the main unit to an area with better signal reception (e.g., near a window, away from electronics). Check time zone setting. Manual time setting is available if radio control fails.
الارم نه ٿو لڳي.Alarm is not activated; alarm volume too low (not applicable for this model, but common issue).Ensure the alarm icon (ALM1 or ALM2) is displayed, indicating activation. Re-set the alarm time.

8. ٽيڪنيڪل وضاحتون

ماڊلWS 6810 amber
مکيه يونٽ جي ماپ (L x W x H)28.5 x 7 x 5.5 سينٽي ميٽر (تقريبن 11.2 x 2.8 x 2.2 انچ)
مکيه يونٽ وزن500 گرام (تقريبن 1.1 پائونڊ)
Outdoor Sensor (TX96) Dimensions (L x W x H)50 x 22 x 104 ملي ميٽر (تقريبن 2.0 x 0.9 x 4.1 انچ)
بجلي جي فراهمي (مکيه يونٽ)220V AC Power Adapter (included)
Backup Power (Main Unit)3 x AAA Micro LR03 batteries (not included)
بجلي جي فراهمي (ٻاهرين سينسر)2 x AAA Micro LR03 batteries (not included)
ڊسپلي جو قسمايل اي ڊي (امبر)
وقت جي هم وقت سازيDCF-77 Radio Controlled
گرمي پد جي حد (اندروني)(Information not provided, typical range is 0°C to 50°C)
گرمي پد جي حد (ٻاهران)(Information not provided, typical range is -20°C to 60°C)

9. وارنٽي ۽ سپورٽ

Technoline products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or visit the official Technoline webسائيٽ.

سرڪاري پراڊڪٽ پيج: http://www.technoline.eu/products/en/4029665068107

مھرباني ڪري وارنٽي دعوائن لاءِ خريد ڪرڻ جو پنھنجو ثبوت رکو.

لاڳاپيل دستاويز - WS 6810 amber

اڳيview WS8014 ريڊيو ڪنٽرول ٿيل گھڙي ۽ موسم اسٽيشن استعمال ڪندڙ دستياب
WS8014 ريڊيو-ڪنٽرول ٿيل گھڙي ۽ موسم اسٽيشن لاءِ استعمال ڪندڙ مينوئل، خاصيتون، سيٽ اپ، آپريشن، وضاحتون، ۽ حفاظتي معلومات کي ڍڪيندي.
اڳيview وائرليس 868 MHz موسم اسٽيشن جي هدايت نامو
Comprehensive instruction manual for the Wireless 868 MHz Weather Station, covering features, setup, operation, weather forecasting, and specifications. Includes details on indoor and outdoor temperature monitoring, DCF-77 radio-controlled time, and alarm functions.
اڳيview Weather Forecast Memo Alarm Clock Instructions Manual - TechnoLine
Comprehensive instruction manual for the TechnoLine Weather Forecast Memo Alarm Clock, detailing setup, features, radio-controlled time, weather forecasting, alarm functions, and specifications.
اڳيview ميمو الارم ڪلاڪ آپريٽنگ مينوئل: ريڊيو ڪنٽرول ٿيل وقت ۽ خاصيتون
ميمو الارم ڪلاڪ لاءِ جامع آپريٽنگ مينوئل، تفصيل سان خاصيتون، سيٽ اپ، ريڊيو-ڪنٽرول ٿيل وقت جي استقبال، دستي وقت جي سيٽنگ، الارم افعال، سار سنڀال، ۽ وضاحتون.
اڳيview Funkwecker mit Projektion WT519 يوزر مينوئل
ٽيڪنولين WT519 پروجيڪشن الارم ڪلاڪ لاءِ استعمال ڪندڙ مينوئل، سيٽ اپ، فنڪشن ڪيز، ڊسپلي موڊس، وقت ۽ الارم سيٽنگون، ۽ اهم استعمال جا نوٽس شامل آهن.
اڳيview TechnoLine WS6620 Desktop Weather Station: User Manual and Setup Guide
Detailed instruction manual for the TechnoLine WS6620 Desktop Weather Station. Learn how to set up, operate, and interpret weather forecasts, temperature, humidity, and barometric pressure readings. Includes guidance on remote sensor installation, RCC time synchronization, and alarm settings.