براؤننگ ايڪس-بولٽ انٽيگريٽيڊ اسڪوپ ماؤنٽ سسٽم (ماڊل 12501) هدايت نامو

تعارف

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your Browning X-Bolt Integrated Scope Mount System. Securely mounted optics are essential for the accuracy and precision of any rifle. The Browning X-Bolt Integrated Scope Mount System features an innovative X-Lock mounting system designed for enhanced stability and precise placement.

پيداوار ختمview

The Browning X-Bolt Integrated Scope Mount System is engineered to provide a stable and reliable platform for your rifle scope. Its unique design ensures a tight fit and improved accuracy.

اهم خاصيتون:

• X-Lock Mounting System: Utilizes four screws per base for superior stability compared to traditional two-screw systems.
• وڌايل استحڪام: Bases are secured at all four corners, ensuring a tighter hold to the rifle receiver.
• Precision Placement: Allows for more accurate positioning of the bases on the receiver.
• پائيدار تعمير: Made from aluminum for lightweight strength.

سيٽ اپ ۽ تنصيب

Proper installation is crucial for the performance and safety of your scope mount system. Please follow these steps carefully.

گهربل اوزار:

• Torque رنچ (سفارش ٿيل)
• Appropriate hex/Torx bit for screws
• Thread-locking compound (optional, for added security)

تنصيب جا مرحلا:

1. Prepare the Rifle: Ensure the rifle is unloaded and pointed in a safe direction. Clear the work area.
2. Identify Base Orientation: The scope mounts are not identical; there is a specific front and back base contoured to match the corresponding mounting points on your Browning X-Bolt receiver. Incorrect orientation can lead to damage or improper fit. Carefully align each base with its designated position on the receiver.
3. Attach Bases to Receiver: Place the front and rear bases onto the rifle receiver. Secure each base using the four screws provided. Hand-tighten initially to ensure proper alignment.
4. Torque Bases: Using a torque wrench, tighten the base screws to the manufacturer's recommended specifications. Refer to your rifle's manual for specific torque values if available. Evenly tighten screws in a cross pattern to ensure uniform pressure.
5. Install Scope Rings: Place the bottom halves of the scope rings onto the mounted bases. Position your scope into the bottom halves of the rings.
6. Attach Top Rings: Place the top halves of the scope rings over the scope and align them with the bottom halves. Insert the ring screws.
7. Adjust Scope Position: Adjust the scope for proper eye relief and reticle alignment. Once satisfied with the position, gently tighten the ring screws.
8. Torque Ring Screws: Using a torque wrench, tighten the ring screws to the scope manufacturer's recommended specifications. Tighten in a cross pattern, gradually increasing torque to ensure even pressure and to avoid crimping the scope tube.
9. ڪليئرنس چيڪ ڪريو: Verify that there is adequate clearance between the scope's objective lens and the rifle barrel, especially for scopes with larger objective diameters (e.g., 42mm or 44mm). If clearance is insufficient, a different height mount may be required.

آپريشن

Once properly installed, the Browning X-Bolt Integrated Scope Mount System provides a rigid and stable platform for your optic. The system is designed to maintain zero under various conditions, enhancing your rifle's accuracy. Always ensure all screws are properly torqued before use.

سار سنڀال

Regular maintenance will ensure the longevity and reliability of your scope mount system.

• صفائي: Wipe down the mounts with a clean, dry cloth after each use to remove dirt, dust, and moisture. For stubborn grime, a lightly dampened cloth with mild soap can be used, followed by thorough drying.
• چڪاس: Periodically inspect all screws for tightness. Vibrations from firing can sometimes loosen screws over time. Re-torque to specifications if necessary.
• سنکنرن جي روڪٿام: While made of aluminum, applying a thin layer of gun oil or corrosion inhibitor to metal surfaces can help protect against environmental elements, especially in humid conditions.

مشڪلاتون

If you encounter issues with your scope mount system, consider the following common problems and solutions:

• Scope Not Holding Zero:
  • Check all base and ring screws for proper torque. Loose screws are a primary cause of zero shift.
  • Ensure the scope itself is not damaged or malfunctioning.
• Insufficient Scope Clearance (Scope Touching Barrel):
  • This often occurs with scopes having large objective lenses (e.g., 42mm, 44mm, or larger) when using low-height mounts.
  • خريد ڪرڻ تي غور ڪريوasing medium or high-height mounts to provide adequate clearance.
• Difficulty Installing Bases:
  • Verify that you are using the correct front and rear bases for their respective positions on the receiver. The bases are contoured and not interchangeable.
  • Ensure no debris is obstructing the mounting holes on the receiver or bases.

وضاحتون

وارنٽي ڄاڻ

This product is sold with no explicit warranty. Please refer to the retailer's return policy for any issues upon purchase.

حمايت

For further assistance or inquiries regarding the Browning X-Bolt Integrated Scope Mount System, please contact Browning customer service or visit the official Browning website. Ensure you have your product model number (12501) available when seeking support.

Browning Official Webسائيٽ: www.browning.com