ايڪو ڊي ٽي 50/35/آر ايس 50 ڊبليو 2G11 ڪمپيڪٽ فلوروسينٽ هيلوجن بلب استعمال ڪندڙ دستياب

1. تعارف

This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.

The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.

Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.

2. حفاظتي هدايتون

WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.

• پڪ ڪريو ته فڪسچر بلب جي واٽ لاءِ درجه بندي ٿيل آهيtagاي (50W).
• ڊمرز سان استعمال نه ڪريو جيستائين واضح طور تي مطابقت نه هجي.
• Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
• If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
• ٻارن جي پهچ کان پري رکو.

3. سيٽ اپ ۽ تنصيب

1. پاور بند ڪريو: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
2. پراڻو بلب هٽايو (جيڪڏهن قابل اطلاق هجي): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
3. Identify Base Type: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.

Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.
4. نئون بلب لڳايو: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
5. پاور بحال ڪريو: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.

4. آپريٽنگ هدايتون

The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

• Initial Warm-up: فلورسنٽ بلب کي مڪمل چمڪ تائين پهچڻ ۾ ڪجهه لمحا لڳي سگهن ٿا، خاص ڪري ٿڌي ماحول ۾.
• سوئچنگ آن/آف: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.

5. سار سنڀال

• صفائي: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
• متبادل: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
• نيڪال: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.

6. مسئلا حل ڪرڻ

7. وضاحتون

8. وارنٽي ۽ سپورٽ

Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko webتازي وارنٽي تفصيلن لاءِ سائيٽ.

For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's webسائيٽ يا پراڊڪٽ پيڪنگنگ.

ٺاهيندڙ: ايڪو

حصو نمبر: DT50/35/RS

UPC: 031293493040