LEDVANCE Sylvania 20819 T5 Fluorescent Tube Light Bulb User Manual

1. تعارف

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Sylvania 20819 T5 Fluorescent Tube Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.

2. حفاظت جي ڄاڻ

زخم يا نقصان کان بچڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:

• بجلي بند ڪريو: Always turn off the power at the circuit breaker or fuse box before installing, removing, or servicing the bulb.
• صحيح فڪسچر: Ensure the fixture is designed for T5 fluorescent bulbs with a G5 bi-pin base and the specified wattagاي (8W).
• سنڀال سان سنڀال: Fluorescent bulbs are made of glass and can break. Handle them carefully to avoid injury.
• نيڪال: Dispose of used fluorescent bulbs according to local regulations, as they may contain small amounts of mercury. Do not dispose of in regular household waste.
• صرف اندروني استعمال: هي بلب صرف اندروني استعمال لاءِ آهي.
• Dimmable مطابقت: This bulb is dimmable. Ensure your dimmer switch and fixture are compatible with dimmable fluorescent lamps.

3. پراڊڪٽ ختمview

The LEDVANCE Sylvania 20819 is an 8-watt, 12-inch (MOL) T5 fluorescent tube light bulb featuring a G5 bi-pin base. It provides 400 lumens of warm white light at a 3000K color temperature with a frosted finish. This bulb is designed for general illumination in compatible fixtures.

شڪل 1: Sylvania 20819 T5 Fluorescent Tube Light Bulb. This image shows the clear glass tube and the silver-colored G5 bi-pin base with two gold-colored pins at one end.

4. تنصيب

Follow these steps to install the fluorescent tube light bulb:

1. پاور بند ڪريو: Ensure the power supply to the fixture is completely off at the circuit breaker or fuse box before beginning installation.
2. پراڻو بلب هٽايو (جيڪڏهن قابل اطلاق هجي): If replacing an existing bulb, carefully twist and pull the old bulb from its sockets. Dispose of it properly.
3. نئون بلب لڳايو: Align the two pins of the G5 bi-pin base with the slots in the fixture's lamp holders. Gently push the bulb into the sockets until it clicks securely into place. Do not force the bulb.
4. ڪنيڪشن جي تصديق ڪريو: Ensure the bulb is firmly seated in both lamp هولڊرز.
5. پاور بحال ڪريو: هڪ دفعو بلب محفوظ طور تي نصب ٿي وڃي، سرڪٽ بريڪر يا فيوز باڪس مان فڪسچر کي بجلي بحال ڪريو.

5. آپريشن

After installation, the bulb is ready for operation. Use the fixture's switch to turn the light on and off. If connected to a compatible dimmer, adjust the light output as desired.

6. سار سنڀال

Minimal maintenance is required for this fluorescent bulb.

• صفائي: Ensure the power is off before cleaning. Wipe the bulb gently with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
• متبادل: Replace the bulb when it reaches the end of its operational life (approximately 7,500 hours) or if it shows signs of failure (e.g., flickering, dimming, blackening ends).

7. مسئلا حل ڪرڻ

جيڪڏهن بلب صحيح طريقي سان ڪم نٿو ڪري، ته هيٺ ڏنل تي غور ڪريو:

• بلب نه روشني:
  • چيڪ ڪريو ته ڇا فڪسچر کي بجلي جي فراهمي آن آهي.
  • Ensure the bulb is correctly seated in the lamp هولڊرز.
  • Inspect the bulb for visible damage (e.g., broken glass, loose pins).
  • Test with a known working bulb in the same fixture, or test this bulb in a known working fixture, to determine if the issue is with the bulb or the fixture/ballast.
• چمڪندڙ:
  • Flickering can occur at the end of a fluorescent bulb's life. Replace the bulb if it is old.
  • Ensure the bulb is fully seated.
  • Check for proper ballast operation in the fixture.
• مدھم ٿيڻ جا مسئلا:
  • Confirm that both the bulb and the dimmer switch are compatible with dimmable fluorescent lamps.
  • Ensure the dimmer switch is functioning correctly.

جيڪڏهن مسئلا حل ڪرڻ کان پوءِ به مسئلا برقرار رهن ٿا، ته ڪسٽمر سپورٽ سان رابطو ڪريو.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the details below:

وارنٽي وضاحت: For US & Canadian customer questions or support, please call us at 1-800-LIGHTBULB (1-800-544-4828).

For further assistance, you may also visit the official LEDVANCE webسائيٽ يا پنهنجي پرچون ڪندڙ سان رابطو ڪريو.