DYMO LabelWriter 4XL Shipping Label Printer Instruction Manual

تعارف

The DYMO LabelWriter 4XL is a high-performance thermal label printer designed for printing extra-large 4" x 6" shipping labels, warehouse labels, barcode and identification labels, and bulk mailing labels. This printer utilizes direct thermal technology, eliminating the need for costly ink or toner. It is compatible with various e-commerce platforms and offers clear, high-resolution printing.

سيٽ اپ ڪريو

To set up your DYMO LabelWriter 4XL printer, connect it to your computer via the provided USB 2.0 cable. Ensure the power adapter is connected to the printer and a power outlet. Install the DYMO Connect software, which is included with the printer. This software allows you to design and print labels, and manage data.

For detailed software installation instructions, refer to the DYMO Connect software documentation.

لوڊ ڪندي ليبل

1. Open the printer cover by gently lifting it.
2. Place the label roll onto the spindle, ensuring the labels feed from underneath the roll.
3. Insert the spindle with the label roll into the printer's label compartment.
4. Feed the leading edge of the labels into the label entry slot until the printer automatically feeds them into position.
5. Adjust the label guide to fit snugly against the label roll, ensuring the labels are left-justified.
6. پرنٽر ڪپڙا بند ڪريو.

The printer is now ready to print. If the labels do not feed correctly, ensure they are properly aligned and the roll is securely placed.

پرنٽر هلائڻ

The DYMO LabelWriter 4XL is designed for ease of use, especially for high-volume label printing. It supports various label types, including 4" x 6" shipping labels, and integrates with popular e-commerce platforms like Amazon, eBay, Etsy, Poshmark, Shipping Easy, Shopify, and ShipStation.

ڇپائي جو عمل

1. پڪ ڪريو ته پرنٽر توهان جي ڪمپيوٽر سان ڳنڍيل آهي ۽ آن آهي.
2. Open the DYMO Connect software or your preferred e-commerce platform.
3. Select the desired label template or design your custom label. The software offers over 60 professional templates and customization options for text and graphics.
4. Verify the label size and orientation settings match the labels loaded in the printer.
5. Initiate the print command from your software. The printer will quickly produce labels at up to 53 standard 4-line address labels or 129 high-capacity 4-line address labels per minute.

Official Product Video: DYMO 1755120 LabelWriter 4XL Thermal Label Printer

This official product video provides a comprehensive overview of the DYMO LabelWriter 4XL Thermal Label Printer, including demonstrations of its features, label loading, and printing capabilities. It also covers essential maintenance and troubleshooting tips to ensure optimal performance.

سار سنڀال

Regular maintenance ensures the longevity and optimal performance of your DYMO LabelWriter 4XL printer. Cleaning cards are available for purchase on dymo.com.

پرنٽ هيڊ صاف ڪرڻ

1. پرنٽر ڪپڙا کوليو.
2. If labels are loaded, press the reverse feed button to remove them.
3. Take necessary precautions: use eye protection and gloves when handling cleaning cards.
4. Open the cleaning card pack and place a cleaning card into the label entry slot.
5. Press the forward feed button. The cleaning card will roll through the printer, cleaning the print head.
6. Remove the used cleaning card. For the LabelWriter 4XL, you may need to repeat these steps to ensure the entire width of the print head is cleaned.
7. Dispose of the cleaning card properly.
8. Reload your labels and close the printer cover.

مشڪلاتون

Here are solutions to common issues you might encounter with your DYMO LabelWriter 4XL printer:

Excessive Blank Labels

1. Lift the printer cover.
2. Tear off any excess labels.
3. Press the backwards feed button to remove labels from the print head.
4. Unplug the printer.
5. Remove the label spool and ensure the label roll is tightly wound and the right disk is pressed firmly against the roll.
6. Plug the printer back in.
7. Load labels, ensuring they are left-justified. If your printer has a label guide, move it to the far left to hold labels tightly.
8. You may need to press the forward feed button to advance labels.
9. ڍڪ بند ڪريو.

Label Jams

1. پرنٽر ڪپڙا کوليو.
2. Tear off excess labels.
3. Press the backwards feed button to attempt to remove labels from the print head.
4. If labels remain jammed, unplug the printer.
5. Gently pull the faceplate from the top to remove it. Avoid touching circuit boards or sensors.
6. Pull the lever towards you to separate the print head from the roller.
7. Carefully remove any jammed labels. If necessary, cut and remove labels from the printer and roller.
8. Reattach the faceplate by aligning it and gently snapping it into place. Ensure it is secure before plugging the printer back in.
9. Load new labels and you are ready to print.

Mac OSX Print Queue Issues

If you are a Mac OSX user and the printer refuses to print despite the software indicating it's ready, follow these steps:

1. Reset the printer: Unplug the power supply and wait 15 seconds for the blue light to go out, then plug it back in.
2. If the issue persists, restart the print queue:
• Go to System Preferences > Printers & Scanners.
• Select 'DYMO LabelWriter 4XL' from the printers list. If not visible, close and restart the label software.
• Click 'Open Print Queue'.
• In the upper left corner of the Print Queue window, click 'Resume'. This will start printing jobs in the queue.
• If you do not want items printed, click 'Pause' and use the 'x' marks to remove specific print jobs. Then click 'Resume'.
• Before closing, print a test label from the Dymo Label software to verify functionality.

وضاحتون

وارنٽي ۽ سپورٽ

The DYMO LabelWriter 4XL comes with a Limited Warranty. For specific warranty details, please refer to the documentation included with your product or visit the official DYMO webسائيٽ.

If you encounter any issues not covered in this manual or require further assistance, please contact DYMO consumer care lines directly for support.