پيداوار ختمview
The ATD Tools 2114 is a compact 1/4-inch drive air ratchet designed for various applications, particularly in body and engine shops, and for tasks requiring access to confined areas. It features a durable aluminum housing and a black finished head assembly with a tang style forward/reverse knob and a ball-type socket retainer.
اهم خاصيتون:
- Maximum torque: 25 feet/pounds
- Free speed: 250 rpm
- Average air consumption: 4.2 cfm
- ڊگھائي: 6.7 انچ
Image: The ATD Tools 2114 1/4-inch Drive Air Ratchet, featuring its sleek aluminum body and black ratchet head with a square drive.
سيٽ اپ ڪريو
Before operating the air ratchet, ensure you have a clean, dry, and regulated air supply. Proper setup is crucial for optimal performance and tool longevity.
- ايئر سپلائي ڪنيڪشن: Connect the air ratchet to an air compressor using a 1/4-inch NPT air inlet. Ensure all connections are secure and leak-free.
- Air Pressure Regulation: Set your air compressor's regulator to the recommended operating pressure, typically around 90 PSI (6.2 bar). Do not exceed the maximum recommended pressure for the tool.
- لوڻ: Before first use and regularly thereafter, apply a few drops of pneumatic tool oil into the air inlet. This lubricates internal components and helps prevent corrosion.
- نلي ۽ فٽنگ: Use an air hose with an adequate inner diameter (e.g., 3/8-inch) to ensure sufficient airflow to the tool. Check all quick-connect fittings for proper sealing.
آپريٽنگ هدايتون
Follow these steps for safe and effective operation of your ATD Tools air ratchet.
- ساکٽ اٽيچمينٽ: Select the appropriate 1/4-inch drive socket for your fastener. Push the socket firmly onto the square drive anvil until it locks into place with the ball retainer.
- هدايت جي چونڊ: The tool features a tang style forward/reverse knob. Rotate the knob to select the desired direction (clockwise for tightening, counter-clockwise for loosening).
- Tool Engagement: ساکٽ کي فاسٽنر تي چورس طور تي رکو.
- ٽريگر آپريشن: Depress the trigger to activate the tool. The speed of the ratchet is controlled by the amount of trigger depression. Release the trigger to stop the tool.
- حفاظتي احتياط: Always wear appropriate eye protection. Ensure the workpiece is stable. Do not over-tighten fasteners; use a torque wrench for final tightening if specific torque values are required. Disconnect the air supply when changing accessories or performing maintenance.
سار سنڀال
Regular maintenance will extend the life and ensure the consistent performance of your air ratchet.
- روزاني لوبريڪيشن: Add 5-10 drops of pneumatic tool oil into the air inlet before and after each use, or every few hours of continuous operation.
- Air Filter/Lubricator: If your air system includes an in-line air filter and lubricator, ensure the filter is clean and the lubricator reservoir is filled with pneumatic tool oil.
- صفائي: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Do not use harsh solvents that could damage the housing.
- اسٽوريج: Store the tool in a clean, dry environment when not in use. Disconnect it from the air supply.
- چڪاس: Periodically inspect the tool for any signs of wear, damage, or air leaks. Address any issues promptly.
مشڪلاتون
If you encounter issues with your air ratchet, refer to the following common troubleshooting steps.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| اوزار ڪم نه ڪري رهيو آهي يا گهٽ پاور آهي | ناکافي هوا جو دٻاء لوڻ جي کوٽ Obstructed air inlet Worn internal parts | Check air compressor pressure and regulator setting Add pneumatic tool oil Clear any obstructions from the air inlet قابل سروس اهلڪارن سان رابطو ڪريو |
| Air leaks from tool | لوز سامان خراب ٿيل او-رنگ يا سيل | Tighten all air connections Replace worn or damaged seals/O-rings |
| وڌ ۾ وڌ وائبريشن | ڪپڙا بيئرنگ لوڻ اجزاء | Contact qualified service personnel for inspection and repair |
وضاحتون
Detailed technical specifications for the ATD Tools 2114 1/4" Drive Air Ratchet.
| تفصيل | قدر |
|---|---|
| برانڊ | اي ٽي ڊي |
| ماڊل | 2114 |
| مواد | المونيم |
| شيءِ جي ڊگھائي | 6.7 انچ |
| شيءِ جو وزن | 1.3 پائونڊ |
| وڌ ۾ وڌ Torque | 25 فوٽ پائونڊ |
| مفت رفتار | 250 rpm |
| سراسري هوا جو استعمال | 4.2 سي ايف ايم |
| آپريشن موڊ | پنوميٽيڪل |
| سر جو انداز | مقرر چورس |
وارنٽي ۽ سپورٽ
For information regarding warranty coverage, service, or technical support for your ATD Tools 2114 Air Ratchet, please refer to the documentation included with your purchase or visit the official ATD Tools website. You may also contact ATD Tools customer service directly for assistance.
It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.
