ان فوڪس IN102 پورٽيبل ڊي ايل پي پروجيڪٽر يوزر مينوئل

1. تعارف

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

اهم خاصيتون شامل آهن:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• ڊگهي عرصي وارو ايلamp and filter-free design for reduced maintenance.

2. دٻي ۾ ڇا آهي

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• پاور ڪنڊ
• ويگا ڪيبل
• کڻڻ وارو ڪيس
• ريموٽ ڪنٽرول
• حفاظتي هدايتون
• CD Quick Start/User Guide

3. پراڊڪٽ ختمview

شڪل 3.1: سامهون View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

شڪل 3.2: پوئتي View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

شڪل 3.3: مٿي View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

شڪل 3.4: هيٺيون View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. سيٽ اپ

4.1 لڳائڻ

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 ڳنڍڻ واري طاقت

1. Connect the power cord to the AC inlet on the rear of the projector.
2. پاور ڪنڊ جي ٻئي پڇاڙيءَ کي گرائونڊ ٿيل برقي آئوٽليٽ ۾ لڳايو.

4.3 وڊيو ذريعن کي ڳنڍڻ

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• ايس-وڊيو: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• جامع وڊيو: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

پروجيڪٽر کي پاور ڏيڻ کان اڳ پڪ ڪريو ته سڀئي ڪيبل محفوظ طور تي ڳنڍيل آهن.

5. آپريٽنگ هدايتون

5.1 پاور آن/آف

1. پاور آن ڪرڻ لاءِ، دٻايو طاقت button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. پاور آف ڪرڻ لاءِ، دٻايو طاقت button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 ان پٽ سورس جي چونڊ

کي دٻايو ذريعو button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 تصويري ترتيب

• فوڪس ۽ زوم: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Keystone جو سڌارو: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• روشني ۽ برعڪس: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 ايڪو موڊ

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D ڪارڪردگي

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. سار سنڀال

6.1 ايلamp بدلائڻ

پروجيڪٽر ايلamp هڪ محدود عمر آهي. جڏهن lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. پاور تار کي ختم ڪريو.
3. l ڳوليو ۽ کوليوamp cover on the top of the projector.
4. احتياط سان پراڻي ايل کي هٽايوamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. ايل کي محفوظ ڪريوamp ڍڪيو ۽ پاور ڪنڊ ۾ پلگ ان.
6. ايل کي ري سيٽ ڪريوamp پروجيڪٽر جي او ايس ڊي مينيو ۾ ٽائمر.

6.2 صفائي

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 اسٽوريج

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• ڪنيڪشن چيڪ ڪريو: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: استعمال ڪريو ذريعو button on the projector or remote to select the correct input channel corresponding to your connected device.
• ڪمپيوٽر ڊسپلي سيٽنگون: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7، يا F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• پروجيڪٽر ايلamp: تصديق ڪريو ايلamp indicator light. If it's red or blinking, the lamp متبادل جي ضرورت ٿي سگھي ٿي.

7.2 Projector Shuts Off Unexpectedly

• گهڻو گرم ٿيڻ: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp مسئلا: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• بجلي جي فراهمي: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 تصوير جي معيار جا مسئلا

• ڌنڌلي تصوير: Adjust the focus ring on the projector lens.
• Distorted Image (Trapezoid): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 ريموٽ ڪنٽرول ڪم نه ڪري رهيو آهي

• بيٽريون: ريموٽ ڪنٽرول ۾ بيٽريون تبديل ڪريو.
• نظر جي لڪير: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

9.1 محدود وارنٽي

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• پروجيڪٽر: 5 سال محدود وارنٽي
• حصا ۽ مزدوري: 2-year coverage
• Lamp: 6 مهينن جي محدود وارنٽي

مھرباني ڪري وارنٽي دعوائن لاءِ خريد ڪرڻ جو پنھنجو ثبوت رکو.

9.2 ڪسٽمر سپورٽ

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webسائيٽ.