Chattanooga M-2 Hydrocollator Heating Unit: User Manual

1. تعارف

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Chattanooga M-2 Hydrocollator Heating Unit. Please read these instructions thoroughly before using the device to ensure proper function and user safety. This unit is designed for heating Hydrocollator Moist Heat Packs for therapeutic applications.

2. اهم حفاظتي ڄاڻ

Always adhere to the following safety guidelines to prevent injury or damage to the unit:

• برقي حفاظت: Ensure the unit is plugged into a properly grounded outlet. Do not operate with a damaged power cord or plug.
• پاڻي جي سطح: Maintain the water level as specified to prevent damage to heating elements and ensure proper pack heating.
• گرمي پد: The unit heats water to high temperatures (up to 180°F). Exercise extreme caution when handling hot packs to avoid burns. Always use tongs and wrap packs in several layers of toweling before application to skin.
• ٻرندڙ مواد: Do not use or store flammable materials near the unit.
• نگراني: Do not leave the unit unattended during operation, especially during initial heat-up.
• صفائي: Disconnect the unit from power before cleaning or performing any maintenance.

3. سيٽ اپ جون هدايتون

Follow these steps for initial setup of your Hydrocollator Heating Unit:

1. پيڪنگ کولڻ: Carefully remove the unit from its packaging. Inspect for any shipping damage. Retain packaging for future transport if needed.
2. لڳائڻ: Position the unit on a level, stable surface. The M-2 model is a wheeled, floor-mounted unit, allowing for easy relocation. Ensure adequate clearance around the unit for ventilation.
3. پاڻي ڀرڻ: Open the lid and fill the tank with distilled or demineralized water until the water level is approximately 1 inch below the top edge of the tank. Do not overfill.
4. پاور ڪنيڪشن: Plug the power cord into a grounded electrical outlet. The unit operates on standard electrical power (refer to specifications for voltage گهرجون).
5. شروعاتي گرمي: Allow the unit to heat for several hours (typically 4-6 hours) to reach the operating temperature of approximately 160-180°F (71-82°C). The unit is designed to maintain this temperature automatically.

Image of the Chattanooga M-2 Hydrocollator Heating Unit, a stainless steel appliance designed for heating hot packs, featuring wheels for mobility and handles on the sides.

4. آپريٽنگ هدايتون

Once the unit has reached its operating temperature, you can begin heating Hydrocollator Moist Heat Packs:

1. Placing Packs: Using the provided tongs, carefully place the desired Hydrocollator Moist Heat Packs into the hot water. Ensure packs are fully submerged.
2. گرمائش جو وقت: Allow packs to heat for at least 20-30 minutes to ensure they reach the optimal therapeutic temperature.
3. Removing Packs: Use the tongs to carefully remove a heated pack from the unit. Allow excess water to drip off.
4. درخواست: Always wrap the hot pack in several layers of toweling before applying it to the patient's skin. Never apply a hot pack directly to the skin.
5. نگراني: Regularly check the patient's skin during treatment to prevent burns.

5. سار سنڀال ۽ صفائي

Regular maintenance ensures the longevity and hygienic operation of your Hydrocollator unit:

• Daily Water Level Check: Check the water level daily and add distilled or demineralized water as needed to maintain the recommended level.
• هفتيوار صفائي: At least once a week, or more frequently with heavy use, perform a thorough cleaning:
1. يونٽ کي پاور سپلائي کان ڌار ڪريو.
2. Using the wheels and side handles, carefully move the unit to a suitable drainage area.
3. ٽانڪي مان سڄو پاڻي ڪڍو.
4. Clean the interior of the tank and heating elements with a non-abrasive cleaner and a soft brush or cloth. Rinse thoroughly.
5. Refill the unit with fresh distilled or demineralized water.
• ڊسڪنگ: Periodically, mineral deposits may accumulate. Use a commercial descaling agent designed for stainless steel appliances, following the manufacturer's instructions.
• ٻاهرين صفائي: اشتهار سان ٻاهران صاف ڪريوamp ڪپڙي ۽ نرم صابن جي ضرورت مطابق.

6. مسئلا حل ڪرڻ

If you encounter issues with your Hydrocollator unit, refer to the following common problems and solutions:

• يونٽ گرم نه ٿيڻ:
  • Check if the unit is properly plugged into a functional power outlet.
  • پڪ ڪريو ته سرڪٽ بريڪر ٽرپ نه ٿيو آهي.
  • Ensure the water level is adequate; low water levels can prevent heating.
• پاڻي جا رستا:
  • Inspect the drain valve for proper closure.
  • Check for any visible cracks or damage to the tank. If damage is found, discontinue use and contact customer support.
• Packs Not Heating Properly:
  • Ensure the unit has had sufficient time to reach operating temperature.
  • Verify packs are fully submerged in water.
  • Check for excessive mineral buildup on heating elements, which can reduce efficiency.

For issues not resolved by these steps, please contact Chattanooga customer support.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information, technical support, or to order replacement parts, please contact Chattanooga customer service directly. Refer to the product packaging or the official Chattanooga webتازي رابطي جي تفصيل لاءِ سائيٽ.