ليويٽون ويٽ گارڊ 15-Amp, 250-Volt Industrial Grade Locking Plug

1. پراڊڪٽ ختمview

The Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49) is a robust wiring device designed for demanding industrial environments. This plug features a polarized, grounding, L6-15P configuration with 3 wires, rated for 250V AC and 15 Amps. It is constructed from EPTR rubber material in a yellow color, ensuring water-tight performance and resistance to various harsh conditions. The Wetguard line meets IP67 and NEMA ratings for water ingress protection, offering superior durability and reliability.

Figure 1: Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49)

2. اهم خاصيتون

• Industrial Grade Construction: Built to withstand harsh industrial environments.
• Watertight and Dust-tight: Meets IP67 and NEMA ratings for protection against water and dust ingress.
• پائيدار مواد: Made from EPTR rubber, resistant to water, acids, alkalis, lubricants, cleaners, and solvents.
• corrosion مزاحمت: Blades, contacts, terminal screws, and wiring clamps are electroless nickel-coated brass.
• آسان وائرنگ: Deep wire wells in the wiring module facilitate easier wiring.
• بصري چڪاس: Clear housing aids in inspecting for proper wire insertion and connection.
• محفوظ ڪنيڪشن: Patented compression nut and strain relief system ensure integrity of both the watertight seal and electrical connection.
• ٺاھ جوڙ: L6-15P, 2-pole, 3-wire grounding.
• سرٽيفڪيشن: UL 498, CSA C22.2, NOM 057 approved.

3. وضاحتون

4. حفاظت جي ڄاڻ

Always follow local electrical codes and regulations when installing or servicing electrical devices. Improper installation or use can result in serious injury or death. Disconnect power at the circuit breaker or fuse box before working on any electrical wiring.

• Ensure the power supply is OFF before installation or maintenance.
• مناسب ذاتي حفاظتي سامان (پي پي اي) استعمال ڪريو جهڙوڪ حفاظتي چشما ۽ ​​موصل دستانا.
• Verify correct wiring polarity and grounding connections.
• مقرر ڪيل حجم کان و notيڪ نه ووtage ۽ amperage ratings of the device.
• Keep the device clean and free from debris to maintain its watertight integrity.
• If the device shows signs of damage, discontinue use and replace it immediately.

5. تنصيب

This section outlines the general steps for wiring the Leviton Wetguard Locking Plug. For detailed wiring diagrams and specific instructions, refer to the packaging or consult a qualified electrician.

1. ڪيبل تيار ڪريو: Strip the outer jacket of the cable to the appropriate length, exposing the insulated conductors. Strip the insulation from each conductor.
2. Disassemble the Plug: Unscrew the compression nut and separate the plug housing components.
3. ڪيبل داخل ڪريو: Feed the prepared cable through the compression nut and into the plug housing.
4. وائر ڪنيڪشن: Connect the conductors to the appropriate terminal screws. The clear housing allows for visual verification of proper wire insertion. Ensure all connections are tight and secure.
5. Assemble the Plug: Reassemble the plug housing, ensuring the internal components are correctly aligned. Tighten the compression nut to create a watertight seal and engage the strain relief system.
6. تصديق ڪريو: Double-check all connections and ensure the plug is securely assembled before restoring power.

6. آپريشن

The Leviton Wetguard Locking Plug is designed for secure and reliable electrical connections in wet or dusty environments. To operate:

1. ڳنڍڻ: Align the blades of the locking plug with the corresponding slots on a compatible locking receptacle.
2. بند ڪرڻ لاء موڙ: Insert the plug fully and twist it clockwise until it locks into place. This action creates a secure mechanical and electrical connection, preventing accidental disconnection.
3. ڳنڍڻ: To disconnect, twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.

The watertight design ensures safe operation even when exposed to moisture, provided the connection is properly mated and sealed.

7. سار سنڀال

Regular maintenance helps ensure the longevity and safe operation of your Leviton Wetguard Locking Plug.

• وقتي معائنو: Visually inspect the plug and cable for any signs of wear, cuts, cracks, or discoloration. Check for loose connections or corrosion on the blades.
• صفائي: Clean the exterior of the plug with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the rubber material. Ensure the plug is dry before use.
• اسٽوريج: When not in use, store the plug in a clean, dry environment to prevent damage and prolong its lifespan.
• مهر جي سالميت: Periodically check the integrity of the compression nut and strain relief system to ensure the watertight seal is maintained.

8. مسئلا حل ڪرڻ

If you encounter issues with your Leviton Wetguard Locking Plug, consider the following common troubleshooting steps:

• طاقت ناهي:
  • Check the power source (circuit breaker, fuse).
  • Ensure the plug is fully inserted and locked into the receptacle.
  • نقصان لاء ڪيبل معائنو.
• لوز ڪنيڪشن:
  • Ensure the plug is twisted and locked securely.
  • If the internal wiring feels loose, disconnect power and re-check the terminal screw connections as per installation instructions.
• پاڻي داخل ٿيڻ:
  • Verify that the compression nut is tightly secured.
  • Inspect the rubber housing for any cracks or damage that could compromise the seal.

If the problem persists after attempting these steps, contact Leviton customer support or a qualified electrician.

9. Related Product Information (Video)

هيٺ ڏنل وڊيو هڪ اوور مهيا ڪري ٿيview of the Leviton Wetguard line of watertight wiring devices, showcasing their features and applications in various industrial environments. While the video may feature different models within the Wetguard series, the core principles of durability, watertight sealing, and robust construction apply to the 24W49 locking plug.

10. وارنٽي ۽ سپورٽ

The Leviton Wetguard 15-Amp, 250-Volt Industrial Grade Locking Plug (Model 24W49) is backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the product packaging or visit the official Leviton webسائيٽ.

For technical assistance, product inquiries, or support, please contact Leviton Customer Service:

• Webسائيٽ: www.leviton.com
• ڪسٽمر سروس: ڏانهن رجوع ڪريو webعلائقائي رابطي جي معلومات لاءِ سائيٽ.