Teac AD800

Teac AD-800 CD Player and Auto Reverse Cassette Deck with USB User Manual

ماڊل: AD800

1. تعارف

This manual provides detailed instructions for the safe and efficient operation of your Teac AD-800 CD Player and Auto Reverse Cassette Deck with USB. Please read this manual thoroughly before using the unit and retain it for future reference. The Teac AD-800 combines a CD player, an auto-reverse cassette deck, and a USB recording/playback function, offering versatile audio capabilities.

2. حفاظت جي ڄاڻ

محفوظ آپريشن کي يقيني بڻائڻ ۽ نقصان کي روڪڻ لاءِ، هيٺ ڏنل احتياطي تدبيرن تي عمل ڪريو:

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

4. پراڊڪٽ ختمview

The Teac AD-800 integrates multiple audio playback and recording functionalities into a single unit. Below is an illustration of the front panel and a description of its key components.

Teac AD-800 CD Player and Auto Reverse Cassette Deck with USB front view

Figure 4.1: Front Panel of the Teac AD-800

This image displays the front panel of the Teac AD-800. On the left, the CD tray and display screen are visible, showing track information and playback status. Below the CD tray is the 1-BIT DAC indicator. In the center, controls for recording level (REC LEVEL), source selection (SOURCE: USB, TAPE), repeat function, and CD open/close are located. The right side features the auto-reverse cassette deck compartment with controls for playback, fast forward, rewind, and Dolby NR. At the bottom, the power button, USB port, headphone jack, and pitch control knob are present.

فرنٽ پينل ڪنٽرول:

Rear Panel Connections (Not Pictured):

5. سيٽ اپ

5.1 لڳائڻ

Place the Teac AD-800 on a stable, level surface. Ensure there is sufficient space around the unit for proper ventilation (at least 10 cm on all sides). Avoid direct sunlight, heat sources, and areas with high humidity or dust.

5.2 پاور سان نڻ

  1. پڪ ڪريو ته يونٽ جو پاور سوئچ آف پوزيشن ۾ آهي.
  2. Connect the supplied AC power cord to the AC IN jack on the rear panel of the AD-800.
  3. پاور ڪنڊ جي ٻئي ڇيڙي کي مناسب وال آئوٽليٽ ۾ لڳايو.

5.3 آڊيو ڪنيڪشن

The AD-800 requires connection to an amplifier or receiver and speakers for audio output. It also has audio input for connecting external devices.

6. آپريٽنگ هدايتون

6.1 بنيادي آپريشن

6.2 سي ڊي پليئر آپريشن

  1. کي دٻايو CD OPEN/CLOSE سي ڊي ٽري کولڻ لاءِ بٽڻ دٻايو.
  2. Place a CD (audio CD, CD-R/RW, or MP3 CD) onto the tray with the label side facing up.
  3. کي دٻايو CD OPEN/CLOSE button again to close the tray. The display will show "READING" and then the total number of tracks/time.
  4. کي دٻايو کيڏو (►) پلے بیک شروع ڪرڻ لاءِ بٽڻ.
  5. روڪڻ لاءِ، دٻايو PAUSE (⏸) بٽڻ. ٻيهر شروع ڪرڻ لاءِ ٻيهر دٻايو.
  6. روڪڻ لاءِ، دٻايو روڪيو (■) بٽڻ
  7. To skip tracks, use the SKIP (⏭︎ / ⏮︎) بٽڻ
  8. To fast forward/rewind within a track, hold down the SEARCH (⏪︎ / ⏩︎) بٽڻ
  9. ورجائي پلے بیک: کي دٻايو ورجائي button to cycle through repeat modes (e.g., repeat one track, repeat all tracks).
  10. شفل پلے بیک: The unit supports shuffle play (random programming) as indicated by "SHUFFLE PLAY/RANDOM MEMORY PROGRAMMING" on the front panel. Refer to the remote control for specific shuffle activation.

6.3 ڪيسٽ ڊيڪ آپريشن

  1. کي دٻايو EJECT (⏏) ڪيسٽ جي خاني کي کولڻ لاءِ بٽڻ.
  2. Insert a cassette tape with the desired side facing forward. Close the compartment manually.
  3. کي دٻايو کيڏو (►) پلے بیک شروع ڪرڻ لاءِ بٽڻ.
  4. روڪڻ لاءِ، دٻايو PAUSE (⏸) بٽڻ. ٻيهر شروع ڪرڻ لاءِ ٻيهر دٻايو.
  5. روڪڻ لاءِ، دٻايو روڪيو (■) بٽڻ
  6. To fast forward or rewind, press the FF (⏩︎) or REW (⏪︎) بٽڻ
  7. Auto Reverse: The deck automatically reverses tape direction at the end of a side. The "AUTO REVERSE" indicator will show the current direction.
  8. Dolby NR: کي دٻايو ڊولبي اين آر button to activate or deactivate Dolby B Noise Reduction. This helps reduce tape hiss.
  9. پچ ڪنٽرول: استعمال ڪريو پچ ڪنٽرول knob to slightly adjust the playback speed of the cassette tape.

6.4 USB پلے بیک

  1. Insert a USB memory device (formatted to FAT16/FAT32) containing MP3 file۾ s USB سامهون واري پينل تي پورٽ.
  2. کي دٻايو ذريعو button until "USB" is selected.
  3. Use the playback controls (Play, Pause, Stop, Skip) to navigate and play MP3 files. The display will show track information.
  4. استعمال ڪريو فولڊر buttons (if available on remote or unit) to navigate through folders on the USB device.

6.5 Recording to USB (MP3)

The Teac AD-800 allows recording from CD, cassette, or an external AUX input directly to a USB memory device in MP3 format.

  1. Insert a USB memory device into the USB port. Ensure it has sufficient free space.
  2. ذريعو چونڊيو: کي دٻايو ذريعو button to select the desired input for recording (CD, TAPE, or AUX).
    • For CD: Load a CD into the tray.
    • For Tape: Load a cassette into the deck.
    • For AUX: Ensure an external device is connected to the rear panel AUDIO IN jacks and is playing audio.
  3. رڪارڊنگ ليول کي ترتيب ڏيو: استعمال ڪريو REC سطح knob to adjust the input level. Monitor the level meter on the display to avoid distortion (peaking in the red).
  4. رڪارڊنگ شروع ڪريو:
    • For CD: Start CD playback, then press the رڪارڊ (●) button. The unit may offer synchronized recording from CD.
    • For Tape/AUX: Press the رڪارڊ (●) button, then start playback on the tape deck or external device.
  5. رڪارڊنگ بند ڪريو: کي دٻايو روڪيو (■) button. The recorded MP3 file will be saved to the USB device.
  6. ٽائمر رڪارڊنگ: The unit supports timer recording for tape. Consult the remote control instructions for setting up timer functions.

7. سار سنڀال

7.1 يونٽ جي صفائي

Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. For stubborn stains, lightly dampڪپڙي کي پاڻي ۽ هلڪي صابڻ سان ڌوئي ڇڏيو، پوءِ سڪي ڇڏيو.

7.2 CD Lens Cleaning

If CD playback becomes erratic, the CD lens may be dirty. Use a commercially available CD lens cleaner disc to clean the lens. Do not attempt to clean the lens manually.

7.3 Cassette Head Cleaning

Regularly clean the cassette deck's heads, pinch rollers, and capstans to ensure optimal sound quality and prevent tape damage. Use a cotton swab lightly moistened with isopropyl alcohol. Perform this cleaning after every 10-20 hours of tape playback or recording.

8. مسئلا حل ڪرڻ

If you experience problems with your Teac AD-800, refer to the following common issues and solutions:

مسئلوممڪن سببحل
طاقت نه آهيبجلي جي تار ڳنڍيل نه آهي؛ بجلي جو آئوٽليٽ فعال نه آهي.Ensure power cord is securely connected. Check if the power outlet is working.
ڪوبه آواز ٻاھر نهغلط آڊيو ڪنيڪشن؛ Ampلائفائر/رسيور ان پٽ چونڊيو نه ويو آهي؛ حجم تمام گهٽ آهي.Verify RCA audio cables are correctly connected to the amplifier's input. Select the correct input on your amplifier. Increase volume on both the AD-800 (headphone level) and your ampوierيڪ زنده
سي ڊي نه پئي هلي.سي ڊي غلط طريقي سان داخل ڪئي وئي آهي؛ ڊسڪ گندي يا خراب آهي؛ ڊسڪ فارميٽ سپورٽ نه آهي.Insert CD with label side up. Clean the disc. Ensure it is an audio CD, CD-R/RW, or MP3 CD.
ڪيسٽ ٽيپ نه پئي هليTape inserted incorrectly; Tape is tangled or damaged; Heads are dirty.Ensure tape is inserted correctly. Check tape condition. Clean cassette heads.
USB ڊوائيس سڃاڻي نه سگهيو آهيUSB device not formatted correctly; Incompatible USB device; USB port issue.Ensure USB device is FAT16/FAT32 formatted. Try a different USB device.
رڪارڊنگ جا مسئلاIncorrect source selected; REC LEVEL too low/high; USB device full or write-protected.Verify the correct source is selected. Adjust REC LEVEL. Check USB device storage and write protection.

If the problem persists after trying these solutions, please contact Teac customer support or a qualified service technician.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

Teac products are manufactured to high quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Teac webسائيٽ.

For technical support, service, or inquiries, please contact Teac customer support through their official webسائيٽ يا توهان جي وارنٽي دستاويزن ۾ ڏنل رابطي جي معلومات.

لاڳاپيل دستاويز - AD800

اڳيview TEAC A-800 اسٽيريو ڪيسٽ ڊيڪ اسڪيميٽڪس
ڊولبي سسٽم سان گڏ TEAC A-800 اسٽيريو ڪيسٽ ڊيڪ لاءِ تفصيلي اسڪيميٽڪس، سروس ۽ مرمت لاءِ ٽيڪنيڪل سرڪٽ ڊاگرام مهيا ڪندي.
اڳيview TEAC W-1200 ڊبل ڪيسٽ ڊيڪ مالڪ جو دستور
TEAC W-1200 ڊبل ڪيسٽ ڊيڪ لاءِ جامع مالڪ جو دستور، هن ڊبل ڪيسٽ سسٽم لاءِ خاصيتون، آپريشن، حفاظتي هدايتون، ۽ ٽيڪنيڪل وضاحتون تفصيل سان بيان ڪري ٿو.
اڳيview TEAC C-3X اسٽيريو ڪيسٽ ڊيڪ سروس مينوئل
TEAC C-3X اسٽيريو ڪيسٽ ڊيڪ لاءِ جامع سروس مينوئل، وضاحتن جي تفصيل، سروس ڊيٽا، ميڪيڪل ۽ برقي ترتيبون، چيڪ، ڌماڪيدار views، حصن جي فهرست، پي سي بي ڊاگرام، ۽ بلاڪ ڊاگرام.
اڳيview TEAC A-20 اسٽيريو ڪيسٽ سروس ڊيٽا
TEAC A-20 اسٽيريو ڪيسٽ ڊيڪ لاءِ جامع سروس ڊيٽا، وضاحتن سميت، ڦاٽي پيو. views، ميڪيڪل ۽ برقي حصن جي فهرست، ۽ سرڪٽ ڊاگرام.
اڳيview TEAC RW-800 سروس مينوئل: وضاحتون، ترتيبون، ۽ حصا
TEAC RW-800 سي ڊي ري رائٽيبل ڊيڪ لاءِ جامع سروس مينوئل، وضاحتن، ترتيب جي طريقيڪار، حصن جي فهرستن، اسڪيميٽڪس، ۽ وائرنگ ڊاگرام جي تفصيل سان.
اڳيview Teac A-660 ڪيسٽ ڊيڪ سروس مينوئل ۽ اسڪيميٽڪس
Teac A-660 ڪيسٽ ٽيپ ڊيڪ لاءِ جامع سروس مينوئل ۽ تفصيلي سرڪٽ اسڪيميٽڪس، سار سنڀال ۽ مرمت جي ماهرن لاءِ ضروري ٽيڪنيڪل معلومات پيش ڪن ٿا.