1. پراڊڪٽ ختمview
The Eiko 635B is a high-quality 12-volt, 35-watt incandescent light bulb designed for various applications requiring reliable illumination. Featuring a SC Bayonet European (BA20s) base and an SB-35 bulb type, this bulb provides a warm 2700 Kelvin light, ideal for creating a comfortable ambiance. Its robust construction ensures consistent performance and a long service life.
This image displays the Eiko 635B incandescent light bulb, featuring its clear glass envelope and the BA20s bayonet base. The bulb is designed for 12-volt systems and has a power rating of 35 watts.
2. حفاظت جي ڄاڻ
Please read and understand all safety instructions before installing or operating the Eiko 635B bulb. Failure to do so may result in electric shock, fire, or personal injury.
- بجلي بند: Always ensure the power supply to the fixture is turned off at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
- ٿڌي ڪريو: Allow the bulb to cool completely before handling. Incandescent bulbs can become very hot during operation and cause burns.
- صحيح جلدtage: Use only with 12-volt power sources. Using incorrect voltage can damage the bulb and the fixture, and pose a fire hazard.
- Proper Base: Ensure the fixture has a compatible SC Bayonet European (BA20s) base. Do not force the bulb into an incompatible socket.
- سنڀال سان سنڀال: Avoid touching the glass envelope of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
- نيڪال: استعمال ٿيل يا ٽٽل بلب مقامي ضابطن مطابق ضايع ڪريو.
3. سيٽ اپ (انسٽاليشن)
Follow these steps to safely install your Eiko 635B incandescent bulb:
- پاور آف جي تصديق ڪريو: Confirm that the power to the light fixture is completely disconnected.
- فڪسچر جو معائنو ڪريو: Ensure the light fixture is clean, dry, and compatible with a BA20s base and 12-volt, 35-watt bulbs.
- Unpack Bulb: Carefully remove the new Eiko 635B bulb from its packaging.
- بلب داخل ڪريو: Align the pins on the bulb's BA20s base with the slots in the fixture's socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
- پاور بحال ڪريو: هڪ دفعو بلب محفوظ طور تي نصب ٿي وڃي، سرڪٽ بريڪر يا فيوز باڪس تي فڪسچر کي بجلي بحال ڪريو.
- ٽيسٽ: بلب صحيح طريقي سان ڪم ڪري رهيو آهي ان جي تصديق ڪرڻ لاءِ لائيٽ سوئچ آن ڪريو.
4. آپريٽنگ هدايتون
The Eiko 635B incandescent bulb operates simply by applying 12 volts of power to its base. It is designed for immediate full brightness upon activation.
- چالو ڪرڻ: Turn on the switch connected to the light fixture to illuminate the bulb.
- غير فعال ٿيڻ: Turn off the switch to extinguish the bulb.
- گرمي: Be aware that incandescent bulbs generate heat during operation. Ensure adequate ventilation around the fixture.
5. سار سنڀال
Minimal maintenance is required for the Eiko 635B bulb. Regular cleaning and timely replacement will ensure optimal performance.
- صفائي: Before cleaning, ensure the bulb is cool and the power is off. Gently wipe the glass envelope with a soft, dry, lint-free cloth to remove dust or smudges. Do not use liquid cleaners directly on the bulb.
- متبادل: When the bulb reaches the end of its life, it will cease to illuminate. Follow the installation steps in Section 3 to replace it with a new Eiko 635B (or equivalent) bulb.
6. مسئلا حل ڪرڻ
If your Eiko 635B bulb is not functioning as expected, consider the following common issues and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| بلب نه ٿو روشن ٿئي | No power to fixture, loose connection, bulb burnt out, incorrect voltage. | Check circuit breaker/fuse. Ensure bulb is securely seated. Replace bulb if burnt out. Verify fixture provides 12V. |
| بلب ٽمڪي ٿو يا مدھم آهي | Loose connection, insufficient voltage, faulty fixture wiring. | Ensure bulb is tightly screwed/locked. Check voltage supply. Consult a qualified electrician if wiring is suspected. |
| بلب جلدي سڙي ٿو | اوور- Voltage, excessive vibration, frequent on/off cycling, faulty fixture. | جلد جي تصديق ڪريوtage supply is exactly 12V. Ensure bulb is not subject to excessive vibration. Reduce frequent switching if possible. Inspect fixture for issues. |
7. وضاحتون
| وصف | قدر |
|---|---|
| برانڊ | ايڪو |
| ماڊل نمبر | 48052 |
| پيداوار جو نالو | 635B - 12V 35W A7275 |
| جلدtage | 12 وولٽ |
| واتtage | 35 واٽ |
| بلب جو بنياد | SC Bayonet European (BA20s) |
| بلب جو قسم | SB-35 |
| رنگ جي درجه حرارت | 2700 ڪيلون |
| M.O.L. (Length) | 2.60 انچ / 66.0 ملي ميٽر. |
| شيءِ جو وزن | 0.01 آونس |
| يو پي سي | 280342803426 |
8. وارنٽي ڄاڻ
Eiko products are manufactured to high standards and are typically covered by a limited manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the original product packaging or the official Eiko webتفصيلي وارنٽي معلومات لاءِ سائيٽ.
9. ڪسٽمر سپورٽ
For technical assistance, product inquiries, or warranty claims, please contact Eiko customer support through their official website or the contact information provided on your product packaging. When contacting support, please have your product model number (48052) and any relevant purchase information ready.
Eiko Official Webسائيٽ: www.eiko.com (مهرباني ڪري نوٽ ڪريو: هي هڪ جڳهه رکندڙ آهي URL. Refer to actual product documentation for the correct webسائيٽ.)
