1. تعارف
This manual provides essential information for the safe and efficient operation of your Steinbach SPS 75-1 Filter Pump. This self-priming pump is designed for use with pool filter systems, capable of handling pools up to 33,000 liters. It features a robust 230 V/450 W motor and a pump capacity of 8,520 liters per hour (142 l/min).
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury.
2. حفاظتي هدايتون
باهه، بجليءَ جي جھٽڪي، يا زخم جي خطري کي گهٽائڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو.
- برقي حفاظت: Ensure the pump is connected to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug. Disconnect power before performing any maintenance or service.
- پاڻي جي گرمي پد: The pump is designed for a maximum water temperature of 35°C (95°F). Operating above this temperature can cause damage to the pump.
- لڳائڻ: Install the pump on a stable, level surface, away from direct sunlight and excessive moisture. Ensure adequate ventilation around the motor.
- ٻار ۽ پالتو جانور: آپريشن دوران ٻارن ۽ پالتو جانورن کي پمپ کان پري رکو.
- سار سنڀال: Only perform maintenance as described in this manual. For complex repairs, consult a qualified technician.
3. سيٽ اپ
پنهنجي فلٽر پمپ جي صحيح انسٽاليشن لاءِ انهن قدمن تي عمل ڪريو.
- پيڪنگ کولڻ: Carefully remove all components from the packaging. Inspect the pump for any signs of damage during transit.
- لڳائڻ: Position the pump as close to the pool as possible, ensuring it is below the water level for optimal self-priming. The pump should be on a firm, level surface to prevent vibration.
- نيل ڪنيڪشن: Connect the pool hoses to the pump's inlet and outlet ports. The pump supports hose diameters of 32mm and 38mm. Ensure all connections are tight to prevent leaks and maintain prime.
شڪل 3.1: بند اپ view of the pre-filter inlet with a hose connection, showing the clear cover and filter basket.
Figure 3.2: The pre-filter inlet without a hose attached, illustrating the threaded connection for secure fitting.
Figure 3.3: The pump's outlet connection with a hose securely fastened, ready for water discharge.
Figure 3.4: The pump's outlet port, showing the internal threading for hose attachment.
Figure 3.5: An overall perspective of the Steinbach SPS 75-1 Filter Pump, highlighting its compact design and key components.
- پمپ پرائمنگ: As a self-priming pump, it will draw water once connected. However, for initial startup, it is recommended to fill the pre-filter housing with water to assist in faster priming.
- برقي ڪنيڪشن: Plug the pump into a suitable 230V electrical outlet. Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
4. آپريٽنگ هدايتون
Once installed, operating the pump is straightforward.
- پمپ شروع ڪرڻ: Turn on the power supply to the pump. The pump will begin to draw water and circulate it through your filter system.
- نگراني: Observe the pump during its initial operation to ensure there are no leaks and that water is flowing correctly. The pump operates at approximately 70 dB.
- پمپ کي روڪڻ: پمپ کي بجلي جي فراهمي کي بند ڪريو.
- هلائڻ جو وقت: The optimal run time for your pump depends on your pool size and usage. For a 33,000-liter pool, ensure sufficient daily filtration to maintain water clarity.
5. سار سنڀال
باقاعده سار سنڀال توهان جي پمپ جي ڊگهي عمر ۽ ڪارڪردگي کي يقيني بڻائي ٿي.
- فلٽر کان اڳ صفائي: The pump is equipped with a pre-filter to catch larger debris. Regularly inspect and clean the pre-filter basket. To do this, turn off the pump, disconnect power, unscrew the clear lid, remove the basket, clean it, and reassemble. Ensure the O-ring is properly seated for a watertight seal.
- سياري ڪرڻ: Before freezing temperatures, drain all water from the pump and hoses. Store the pump in a dry, frost-free location.
- عام صفائي: Keep the exterior of the pump clean and free from dirt and debris. Do not use harsh chemicals.
6. مسئلا حل ڪرڻ
جيڪڏهن توهان کي پنهنجي پمپ سان مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پمپ شروع نٿو ٿئي | بجلي جي فراهمي ناهي موٽر اوور لوڊ امپيلر بند ٿي ويو | پاور ڪنيڪشن ۽ سرڪٽ بريڪر چيڪ ڪريو Allow motor to cool, check for obstructions Inspect and clear impeller |
| گهٽ پاڻيءَ جو وهڪرو | بند ٿيل ا pre فلٽر سکشن لائن ۾ ايئر ليڪ تلاءَ ۾ پاڻيءَ جي گھٽ سطح | Clean pre-filter basket سختي لاء سڀ ڪنيڪشن چيڪ ڪريو Add water to pool |
| پمپ شور آهي | سسٽم ۾ هوا وائبريشن ڪپڙا بيئرنگ | Bleed air from system, check for leaks پڪ ڪريو ته پمپ هڪ مستحڪم مٿاڇري تي آهي قابل ٽيڪنيشن سان رابطو ڪريو |
| پمپ پريم وڃائي ٿو | سکشن لائن ۾ ايئر ليڪ پاڻي جي گھٽ سطح بند ٿيل ا pre فلٽر | Check all connections and O-rings Ensure adequate water level Clean pre-filter basket |
If the problem persists after attempting these solutions, please contact customer support or a qualified service technician.
7. وضاحتون
Technical data for the Steinbach SPS 75-1 Filter Pump.
Figure 7.1: Product label detailing the pump's electrical and performance specifications.
Figure 7.2: Dimensional drawing of the pump, indicating height, width, and length.
| پيرا ميٽر | قدر |
|---|---|
| ماڊل نمبر | 040920 |
| جلدtage | 230 V |
| طاقت | 450 ڊبليو |
| پمپ جي گنجائش | 8,520 l/h (142 l/min) |
| Max. Pump Height | 9 م |
| ڪنيڪشن قطر | 32/38 ملي ايم |
| وڌ ۾ وڌ پاڻي جي درجه حرارت | 35 °C |
| وڌ ۾ وڌ پول سائيز | 33,000 ليٽر |
| شور جي سطح | لڳ ڀڳ. 70 ڊي بي |
| پيداوار جي ماپ (L x W x H) | 45 x 20.5 x 25 سينٽي |
| شيءِ جو وزن | 6 ڪلو |
| مواد | پلاسٽڪ |
| طاقت جو ذريعو | تار ٿيل برقي |
8. وارنٽي ۽ سپورٽ
Specific warranty details for this product are not provided in this manual. Please refer to your purchase documentation or the manufacturer's official webوارنٽي معلومات لاءِ سائيٽ.
For technical support, spare parts, or service inquiries, please contact Steinbach customer service through their official channels. Always provide your product model number (040920) and purchase date when seeking support.
