Eaton TR274W Combo Single-Pole Switch with Tamper مزاحمتي استقبال استعمال ڪندڙ دستياب

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the Eaton TR274W Combo Single-Pole Switch with Tamper Resistant Receptacle. This device combines a single-pole toggle switch and a 15-amp, 125-volt tamper-resistant duplex receptacle into a single unit, designed for residential and commercial applications. It features a neon pilot light that indicates when the switch is in the ON position.

2. حفاظت جي ڄاڻ

WARNING: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician.

• This device is UL listed, ensuring compliance with safety standards.
• ٽيamper-resistant shutters in the receptacle are designed to prevent the insertion of foreign objects, enhancing safety, especially for children.
• پڪ ڪريو ته سڀئي وائرنگ ڪنيڪشن محفوظ آهن ۽ مقامي برقي ڪوڊن جي تعميل ڪن ٿا.
• Do not exceed the specified electrical ratings: 15 Amps, 120 Volts for the switch; 15 Amps, 125 Volts for the receptacle.

3. مصنوعات جون خاصيتون

• Integrated single-pole toggle switch and tamper-resistant 2-pole, 3-wire receptacle.
• Toggle switch rated for 15 Amps، 120 وولٽ.
• Tamper-resistant receptacle rated for 15 Amps، 125 وولٽ.
• UL listed tamper-resistant shutters for enhanced safety.
• Neon pilot light indicates when the switch is ON.
• Durable thermoplastic toggle, top, and back body construction.
• Ultrasonic welding and integrated strap design for superior ground integrity.
• Zinc-plated steel mounting strap for corrosion resistance.
• Terminal screws are backed out for easier wiring.

4. سيٽ اپ ۽ انسٽاليشن

Before beginning installation, ensure the power to the circuit is OFF at the service panel. Use a voltagاي ٽيسٽر تصديق ڪرڻ لاءِ پاور بند آهي.

4.1 وائرنگ ڊاگرام اوورview

The Eaton TR274W is designed for various wiring configurations. The device typically has brass screws for hot (line/load), silver screws for neutral, and a green screw for ground. Terminal screws are pre-backed out for convenience.

Common Wiring Configuration (Switch Controls Receptacle):

1. Connect the incoming hot (black) wire to one of the brass screws.
2. Connect the outgoing hot (load) wire to the other brass screw.
3. Connect the incoming neutral (white) wire to one of the silver screws.
4. Connect the outgoing neutral (load) wire to the other silver screw.
5. Connect the ground (bare copper or green) wire to the green grounding screw.

Independent Wiring Configuration (Switch and Receptacle operate independently):

For configurations where the switch controls a separate load and the receptacle is always hot, or if you want the neon pilot light to only illuminate when the switch is ON and controlling the receptacle, internal jumpers may need to be modified. Consult a qualified electrician or refer to specific wiring diagrams for advanced configurations. Some installations may require breaking a small metal tab between the hot terminals and adding a jumper wire to achieve desired functionality, such as having the neon light only illuminate when the switch is active and controlling the receptacle.

4.2 تنصيب جا مرحلا

1. پاور بند ڪريو: Locate the circuit breaker or fuse controlling the outlet you are replacing and turn it OFF. Verify with a voltagاي جاچ ڪندڙ.
2. Remove Old Device: Carefully remove the existing wall plate and device from the electrical box. Disconnect the wires.
3. تار تيار ڪريو: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary.
4. وائر ڳنڍڻ: Follow the appropriate wiring diagram for your desired functionality. Securely connect the wires to the corresponding terminal screws on the TR274W device. Ensure no bare wire is exposed outside the terminals.
5. ڊوائيس ماؤنٽ ڪريو: Gently fold the wires into the electrical box and secure the TR274W device to the box using the mounting screws provided.
6. وال پليٽ انسٽال ڪريو: Attach the decorative wall plate (sold separately) over the device.
7. پاور بحال ڪريو: سرڪٽ بريڪر يا فيوز باڪس تي بجلي واپس آن ڪريو.
8. ٽيسٽ ڪارڪردگي: Test the switch and receptacle to ensure they operate correctly.

شڪل 1: سامهون view of the Eaton TR274W Combo Single-Pole Switch with Tamper Resistant Receptacle. Shows the toggle switch at the top, the neon pilot light below it, and the tamper-resistant receptacle at the bottom. The "TR" marking indicates tampجي مزاحمت.

شڪل 2: پاسي view of the Eaton TR274W Combo Switch and Receptacle. This image highlights the wiring terminals (brass, silver, and green ground screw) and the robust construction of the device.

5. آپريٽنگ هدايتون

5.1 Toggle Switch Operation

The toggle switch functions as a standard single-pole switch. Push the toggle up to turn the connected load ON, and push it down to turn the load OFF. When the switch is in the ON position, the integrated neon pilot light will illuminate, providing a visual indication of its status.

5.2 ٽيamper Resistant Receptacle Operation

ٽيamper-resistant receptacle features internal shutters that block access to the contacts unless a two-pronged or three-pronged plug is inserted simultaneously. This design helps prevent accidental insertion of foreign objects. To use the receptacle, firmly insert a standard electrical plug into the openings. You may feel slight resistance due to the shutters; this is normal. Ensure the plug is fully seated for proper contact.

6. سار سنڀال

• صفائي: To clean the device, ensure power is OFF at the circuit breaker. Wipe the surface with a soft, damp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• چڪاس: Periodically inspect the device for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.
• The thermoplastic construction is designed for long-term durability and requires no special maintenance beyond cleaning.

7. مسئلا حل ڪرڻ

• No Power to Receptacle/Switch:
  • Check the circuit breaker or fuse for the circuit. Reset if tripped.
  • Verify all wiring connections are secure. Loose connections can interrupt power.
• Neon Pilot Light Not Illuminating:
  • پڪ ڪريو ته سوئچ آن پوزيشن ۾ آهي.
  • Confirm the device is receiving power.
  • If the light still does not work, there might be an internal fault, or the wiring configuration does not support the light's intended operation (e.g., if a jumper tab was broken for independent operation).
• Difficulty Inserting Plug into Receptacle:
  • This is a characteristic of tamper-resistant receptacles. Ensure the plug is aligned correctly and inserted with firm, even pressure.
  • Avoid forcing the plug, as this can damage the shutters or the plug itself.
• Switch Not Controlling Receptacle (or vice-versa) as Expected:
  • This indicates a wiring configuration issue. Review Section 4.1 "Wiring Diagram Overview" and consult a qualified electrician if necessary. Internal jumpers may need adjustment.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please contact Eaton customer service. Details regarding product warranty and support resources can typically be found on the official Eaton website or by contacting their support channels directly. Always refer to the official product packaging or Eaton's webجديد ترين وارنٽي شرطن ۽ ضابطن لاءِ سائيٽ.

Eaton Customer Support:

• سرڪاري ايٽن جو دورو ڪريو webسپورٽ وسيلن، اڪثر پڇيا ويندڙ سوالن، ۽ رابطي جي معلومات لاءِ سائيٽ.
• Have your product model number (TR274W) ready when contacting support.