PROXXON ٽيبل سا FET ماڊل 37070 هدايت نامو

1. تعارف

This manual provides essential information for the safe and effective operation, setup, and maintenance of your PROXXON Table Saw FET Model 37070. Please read all instructions carefully before using the tool to ensure proper function and to prevent injury.

Figure 1: PROXXON Table Saw FET Model 37070

The PROXXON Table Saw FET is designed for precision cutting of various materials including wood, non-ferrous metals, plastics, Plexiglas, fiberglass-reinforced sheets, and foam. Its features include an adjustable blade, an extendable table, and a low-noise motor, making it suitable for intricate projects.

2. حفاظتي هدايتون

بجلي جا اوزار هلائڻ وقت باهه، بجليءَ جي جھٽڪي، ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو.

• سڄو دستورالعمل پڙهو: Understand all operating procedures and warnings before use.
• اکين جي حفاظت جو لباس: اڏامندڙ ملبي کان بچائڻ لاءِ هميشه حفاظتي چشمو يا چشمو پائڻ.
• Use Hearing Protection: ٻڌڻ جي نقصان کي روڪڻ لاءِ آپريشن دوران ڪنن جي حفاظت پائڻ.
• ڪم واري علائقي کي صاف رکو: Cluttered areas invite accidents. Ensure adequate lighting.
• خطرناڪ ماحول کان بچو: ڊي ۾ پاور اوزار استعمال نه ڪريوamp يا گندي جڳهون، يا انهن کي مينهن ڏانهن وڌايو. ڪم واري علائقي کي چڱي طرح روشن رکو.
• ٻارن کي پري رکو: سڀني سياحن کي ڪم واري علائقي کان محفوظ فاصلو رکڻ گهرجي.
• محفوظ ورڪ پيس: هميشه clamp or secure the workpiece to prevent movement during cutting.
• Use Proper Blade: Ensure the correct blade type and size are installed for the material being cut.
• بجلي بند ڪريو: Always disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.
• اوزارن جي سار سنڀال: بهتر ۽ محفوظ ڪارڪردگي لاءِ اوزارن کي تيز ۽ صاف رکو. لوڻ سازي ۽ لوازمات کي تبديل ڪرڻ جي هدايتن تي عمل ڪريو.
• Avoid Forcing Tool: The tool will do the job better and more safely at the rate for which it was designed.
• Never Reach Over Blade: Keep hands clear of the blade path at all times. Use a push stick when necessary.

3. پيڪيج مواد

The PROXXON Table Saw FET Model 37070 package typically includes the following items:

• PROXXON Table Saw FET unit
• Tungsten-tipped saw blade (80mm diameter, 36 teeth)
• Longitudinal stop (fence) with micro-adjustment screw
• Angle stop with rail
• Workpiece pusher
• Non-slotted ABS sawing gap cover
• ويڪيوم ڪلينر اڊاپٽر

Figure 2: Product packaging and included components

4. سيٽ اپ ۽ اسيمبلي

Follow these steps to set up your table saw for initial use.

4.1 Attaching the Longitudinal Stop (Fence)

1. Slide the longitudinal stop onto the guide rail at the front of the table.
2. Position the stop to the desired measurement.
3. Secure the stop using the locking mechanism. For fine adjustments, use the integrated adjusting screw. Each turn of the screw allows for precise corrections, even as small as 0.004 inches (0.1mm).

4.2 آرا بليڊ لڳائڻ

The saw comes with a tungsten-tipped blade installed. If you need to change or install a blade:

1. بجلي بند ڪريو: پڪ ڪريو ته آري پاور آئوٽليٽ مان ان پلگ ٿيل آهي.
2. Remove Table Insert: Carefully remove the table insert covering the blade area.
3. آربر نٽ کي خالي ڪريو: Use the provided wrench to loosen the arbor nut holding the blade.
4. Replace Blade: Remove the old blade and install the new blade, ensuring the teeth are oriented correctly for cutting. The saw supports blades with a diameter between 2 and 3 11/32 inches (50-85mm) and a 13/32 inch (10mm) center hole.
5. آربر نٽ کي سخت ڪريو: آربر نٽ کي محفوظ طور تي مضبوط ڪريو.
6. Reinstall Table Insert: Place the table insert back into position.

Figure 3: Tungsten-tipped saw blade for precision cutting

4.3 پاور سان نڻ

Connect the saw's power cord to a standard 110-120V AC, 60Hz electrical outlet.

5. آپريٽنگ هدايتون

Understand the various adjustments and techniques for effective cutting.

5.1 بليڊ جي اوچائي ۽ زاويه کي ترتيب ڏيڻ

The saw blade's height and angle are adjustable to accommodate different material thicknesses and cut types.

• بلڊ جي اوچائي: Use the adjustment knob located on the front of the saw to raise or lower the blade. The cutting depth ranges from 0.04 to 5/6 inches (1 to 22mm).
• Blade Angle (Miter Cuts): The blade can be tilted up to 45 degrees for miter cuts. Use the angle adjustment lever and scale to set the desired angle.

Figure 4: Blade angle adjustment mechanism

5.2 Making Straight Cuts (Ripping)

1. Set the blade height slightly above the workpiece thickness.
2. Adjust the longitudinal stop (fence) to the desired cutting width. Use the micro-adjustment screw for fine tuning.
3. Place the workpiece against the fence and firmly on the table.
4. آري چالو ڪريو.
5. Slowly and steadily feed the workpiece into the blade, keeping it pressed against the fence. Use the workpiece pusher for safety, especially with smaller pieces.

Figure 5: Performing a straight cut with the longitudinal stop

5.3 Making Miter Cuts

1. Set the blade height appropriately.
2. Adjust the blade angle to the desired miter angle (up to 45 degrees).
3. Alternatively, use the angle stop with its rail, which slides in the milled slot on the table top. Set the angle stop to the required angle.
4. Place the workpiece against the angle stop and firmly on the table.
5. Turn on the saw and feed the workpiece through the blade.
6. Double miter cuts are possible by combining blade tilt and angle stop adjustments.

5.4 Using the Extendable Table

The saw features an extendable table extension with an integrated auxiliary stop, useful for supporting larger workpieces and ensuring accurate cuts.

5.5 Vacuum Adapter

Attach a vacuum cleaner to the integrated adapter to maintain a clean work area and reduce dust exposure during operation.

6. سار سنڀال

Regular maintenance ensures the longevity and optimal performance of your table saw.

6.1 بليڊ متبادل

Refer to Section 4.2 for detailed instructions on how to safely replace the saw blade.

6.2 صفائي

• بجلي بند ڪريو: صاف ڪرڻ کان اڳ هميشه آري کي ان پلگ ڪريو.
• مٽي ۽ مٽي هٽايو: Use a brush or vacuum cleaner to remove sawdust and debris from the table, blade guard, and motor vents.
• Clean Table Surface: Wipe the table surface with a clean, dry cloth.
• اجزاء جي چڪاس ڪريو: Periodically inspect all moving parts, fasteners, and electrical cords for wear or damage.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your PROXXON Table Saw FET.

• شروع نه ٿيندڙ ڏٺو:
  • چيڪ ڪريو ته ڇا پاور ڪنڊ محفوظ طور تي هڪ فنڪشنل آئوٽليٽ ۾ لڳل آهي.
  • پڪ ڪريو ته پاور سوئچ 'آن' پوزيشن ۾ آهي.
  • پڪ ڪريو ته سرڪٽ بريڪر ٽرپ نه ٿيو آهي.
• غلط ڪٽون:
  • Ensure the longitudinal stop (fence) is securely locked and parallel to the blade. Use the micro-adjustment for precise alignment.
  • Check that the blade is clean, sharp, and correctly installed.
  • Verify that the workpiece is held firmly against the fence and table during the cut.
  • For miter cuts, ensure the angle stop or blade tilt is set accurately and secured.
• زياده وائبريشن يا شور:
  • Check if the saw blade is properly tightened and not damaged.
  • Ensure the saw is placed on a stable, level surface.
  • Inspect for any loose components or debris inside the saw housing.
• Blade Binding or Slow Cutting:
  • The blade may be dull and require sharpening or replacement.
  • Ensure the correct blade type is used for the material.
  • Avoid forcing the workpiece; feed it at a consistent, appropriate speed.
  • Check for proper blade alignment and fence parallelism.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

9.1 محدود وارنٽي

PROXXON Inc. warrants to the original purchaser that all PROXXON consumer power tools will be free from defects in material or workmanship for a period of خريداري جي تاريخ کان ٻه سال. This warranty covers repair or replacement of defective parts, provided the tool has not been misused, carelessly handled, or improperly repaired by unauthorized personnel.

This limited warranty does not apply to tools used for commercial manufacturing and construction applications, nor does it cover accessory items such as circular saw blades, drill bits, router bits, jigsaw blades, sanding belts, grinding wheels, and other related accessories. Damage resulting from tampering, accident, abuse, negligence, unauthorized repairs or alterations, unapproved attachments, or other causes unrelated to material or workmanship are not covered.

Any implied warranties are limited in duration to two years from the date of purchase. In no event shall PROXXON Inc. be liable for any incidental or consequential damages arising from the sale or use of this product.

All warranty claims must be accompanied by a copy of the packing slip, invoice, or other proof of purchase.

9.2 ڪسٽمر سپورٽ

For technical assistance, parts, or warranty inquiries, please contact PROXXON customer support. Refer to the product packaging or the official PROXXON webموجوده رابطي جي معلومات لاءِ سائيٽ.