1. تعارف
This manual provides instructions for the proper use and maintenance of the Hunter PGP 05-17200 Rotor Nozzle Adjustment Tool. This tool is designed to facilitate precise adjustments of arc and radius settings on various Hunter rotor and spray head models, ensuring optimal irrigation performance.
The Hunter 05-17200 Rotor Nozzle Adjustment Tool is specifically designed for use with Hunter PGP, PGH, PGM, I-20, I-25, I-40, I-60 series rotors and PS model spray heads.
Figure 1: Two Hunter PGP 05-17200 Rotor Nozzle Adjustment Tools. These white plastic tools feature a central shaft with a key-like end for engaging the sprinkler mechanism and two finger loops for grip.
2. سيٽ اپ
The Hunter PGP 05-17200 Rotor Nozzle Adjustment Tool requires no assembly. It is ready for immediate use upon removal from its packaging.
Before making adjustments, ensure the sprinkler system is active and the specific rotor or spray head requiring adjustment is operating. This allows for visual confirmation of the spray pattern and arc.
3. آپريٽنگ هدايتون
The adjustment tool is used to modify the arc (the degree of rotation) and radius (the distance of water throw) of compatible Hunter sprinkler heads.
3.1. Identifying Adjustment Points
Hunter rotors typically have two main adjustment points: one for arc adjustment and one for radius adjustment. Consult your specific Hunter rotor or spray head manual for the exact location of these points. The adjustment tool is designed to engage these specific slots or screws.
Figure 2: The Hunter adjustment tool being inserted into the top of a sprinkler head. The tool's key-like end fits into the designated adjustment slot on the sprinkler rotor.
3.2. Arc Adjustment
- Locate the Arc Adjustment Slot: This is typically a small slot or screw on the top of the rotor head.
- Insert the Tool: Carefully insert the key end of the 05-17200 tool into the arc adjustment slot.
- Adjust the Arc:
- جي طرف واڌارو the arc, turn the tool clockwise.
- جي طرف گهٽتائي the arc, turn the tool counter-clockwise.
3.3. Radius Adjustment
- Locate the Radius Adjustment Screw: This is often a screw located near the nozzle.
- Insert the Tool: Use the appropriate end of the 05-17200 tool (often the pin on the opposite end of the key) to engage the radius adjustment screw.
- Adjust the Radius:
- جي طرف واڌارو the radius (throw distance), turn the tool clockwise.
- جي طرف گهٽتائي the radius, turn the tool counter-clockwise.
Figure 3: A hand holding the Hunter adjustment tool, which is inserted into a sprinkler head. Water is visibly spraying from the sprinkler, indicating an active system during adjustment.
اهم: Make small, incremental adjustments and observe the results. Over-adjusting can damage the sprinkler mechanism.
4. سار سنڀال
The Hunter PGP 05-17200 Rotor Nozzle Adjustment Tool is a simple, durable device. To ensure its longevity:
- صفائي: Wipe the tool clean with a damp هر استعمال کان پوءِ مٽي يا ملبي هٽائڻ لاءِ ڪپڙو.
- اسٽوريج: Store the tool in a dry place, away from direct sunlight and extreme temperatures, to prevent material degradation.
- چڪاس: Periodically inspect the tool for any signs of wear or damage. Discontinue use if the tool is cracked or broken, as this may impair its function or damage the sprinkler head.
5. مسئلا حل ڪرڻ
This tool is mechanical and has few points of failure. Most issues arise from improper use or compatibility.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Tool does not fit into sprinkler adjustment slot. | Incompatible sprinkler model or incorrect adjustment point. | Verify that your sprinkler is a Hunter PGP, PGH, PGM, I-20, I-25, I-40, I-60 rotor or PS model spray head. Ensure you are attempting to insert the tool into the correct arc or radius adjustment slot. |
| Sprinkler arc/radius does not change after adjustment. | Sprinkler mechanism is stuck or damaged; insufficient adjustment. | Ensure the sprinkler system is active during adjustment. Make sure the tool is fully engaged. If the issue persists, the sprinkler head itself may require maintenance or replacement. |
| Tool feels loose or slips during adjustment. | Tool is worn or damaged; incorrect engagement. | Inspect the tool for wear. If damaged, replace it. Ensure the tool is firmly seated in the adjustment slot before applying torque. |
6. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 05-17200 (also known as 4316349034) |
| برانڊ | شڪاري |
| مطابقت | Hunter PGP, PGH, PGM, I-20, I-25, I-40, I-60 Rotors and PS model spray heads |
| مواد | Plastic (specific composition not provided, but typically durable polymer) |
| شيءِ جو وزن | Approximately 0.317 ounces (per tool) |
| پيڪيج جي ماپ | 5.94 x 3.9 x 0.51 inches (for a pack of two) |
7. وارنٽي ۽ سپورٽ
For information regarding product warranty, please refer to the official Hunter Industries website or contact Hunter customer support directly. Specific warranty terms may vary by region and retailer.
ٽيڪنيڪل مدد يا وڌيڪ پڇا ڳاڇا لاءِ، مھرباني ڪري دورو ڪريو Hunter Industries Support Page يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو.
