تعارف
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Janome 3128 Sewing Machine. Please read this manual thoroughly before using the machine to ensure proper function and to prevent damage.
شڪل 1: The Janome 3128 Sewing Machine, a compact and versatile model designed for various sewing projects.
سيٽ اپ ڪريو
1. Unpacking ۽ لڳائڻ
- مشين کي احتياط سان ان جي پيڪنگ مان هٽايو.
- مشين کي مناسب روشني سان هڪ مستحڪم، هموار مٿاڇري تي رکو.
- Ensure there is enough space around the machine for fabric handling.
2. پاور ڪنيڪشن
- پاور ڪنڊ کي مشين جي پاور ان پٽ سان ڳنڍيو ۽ پوءِ هڪ مناسب اليڪٽريڪل آئوٽليٽ سان ڳنڍيو.
- Turn on the power switch, usually located on the side or back of the machine.
3. بوبن وائنڊنگ
- اسپول پن تي ڌاڳو جو هڪ اسپول رکو.
- Guide the thread through the tension disc for bobbin winding.
- بوبن وائنڊر اسپنڊل تي هڪ خالي بوبن رکو.
- بوبن وائنڊر اسپنڊل کي ساڄي طرف ڌڪيو.
- Press the foot controller gently to wind the thread onto the bobbin. Stop when the bobbin is full.
- Cut the thread and remove the wound bobbin.
4. Bobbin Insertion
- Open the bobbin cover plate, typically located on the needle plate area.
- Insert the wound bobbin into the bobbin case, ensuring the thread unwinds in the correct direction (refer to markings on the bobbin case).
- Pull the thread through the tension spring of the bobbin case.
- بابن جي ڪپڙا پليٽ کي تبديل ڪريو.
شڪل 2: بند ڪرڻ view of the needle plate and bobbin area, showing where the bobbin is inserted and the fabric rests during sewing.
5. Upper Threading
- دٻائڻ واري پير جي ليور کي وڌايو.
- اسپول پن تي ڌاڳو جو هڪ اسپول رکو.
- مٿئين ڌاڳي جي گائيڊ ذريعي ڌاڳي کي هدايت ڪريو.
- Follow the numbered threading path down to the tension assembly, around the take-up lever, and down to the needle.
- سُئيءَ کي اڳيان کان پٺيءَ تائين ڇڪيو.
- سُئي پليٽ جي سوراخ مان بوبن ڌاڳي کي مٿي ڇڪيو، هٿ جي ڦيٿي کي پنهنجي طرف موڙي سُئي کي هڪ ڀيرو هيٺ ڪرڻ ۽ مٿي ڪرڻ لاءِ.
- ٻنهي ڌاڙن (مٿين ۽ بوبن) کي پريسر فٽ هيٺان ۽ مشين جي پوئين پاسي ڇڪيو.
6. سوئي لڳائڻ
- پڪ ڪريو ته مشين بند ٿي وئي آهي.
- انجڻ جي ڪل کي خالي ڪريوamp پيچ
- Remove the old needle (if applicable).
- نئين سُئي کي مشين جي پوئين پاسي واري سڌي پاسي سان داخل ڪريو، ان کي جيترو پري وڃي سگهي مٿي ڌڪيو.
- سوئي کي سخت ڪريو clamp محفوظ طور تي ڇڪيو.
7. Presser Foot Attachment
- دٻائڻ واري پير جي ليور کي وڌايو.
- Align the presser foot with the presser foot holder.
- Lower the presser foot lever to snap the foot into place.
مشين کي هلائڻ
1. سلائي جي چونڊ
The Janome 3128 offers a variety of stitches. To select a stitch, turn the pattern selector dial to the desired letter (A-J) corresponding to the stitch type. The stitch chart on the machine body provides a visual guide.
شڪل 3: The stitch selection chart on the machine, displaying various stitch patterns labeled A through J.
2. سلائي جي ڊيگهه ۽ ويڪر جي ترتيب
Adjust stitch length and width using the corresponding dials. For most utility stitches, a length of 2.5 is standard. Experiment with different settings on scrap fabric to achieve the desired result for your project.
شڪل 4: Close-up of the stitch length and tension adjustment dials, allowing precise control over stitch appearance.
3. Thread Tension Adjustment
Correct thread tension is crucial for balanced stitches. The tension dial typically ranges from 0 to 9. A setting of 3-5 is common for general sewing. If stitches are looping on the top, increase the tension. If looping on the bottom, decrease the tension.
4. سلائي شروع ڪرڻ
- ڪپڙي کي پريسر پير جي هيٺان رکو.
- دٻائڻ واري پير جي ليور گھٽ ڪريو.
- Turn the handwheel slightly towards you to bring the needle down into the fabric.
- Gently press the foot controller to begin sewing. Guide the fabric smoothly without pulling or pushing.
5. Reverse Stitching
To secure the beginning and end of a seam, use the reverse stitch lever or button. Hold it down to sew backward a few stitches, then release to continue sewing forward.
سار سنڀال
باقاعده سار سنڀال توهان جي سلائي مشين جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.
1. صفائي
- لِنٽ هٽائڻ: Regularly remove the needle plate and bobbin case to clean out lint and thread scraps using a small brush. Accumulated lint can affect stitch quality and machine operation.
- ٻاهرين صفائي: مشين جي ٻاهرين حصي کي نرم، سڪل ڪپڙي سان صاف ڪريو. سخت ڪيميڪل استعمال ڪرڻ کان پاسو ڪريو.
2. سوئي مٽائڻ
Replace the needle frequently, especially after 8-10 hours of sewing or if it becomes bent or dull. A dull needle can cause skipped stitches, fabric damage, or needle breakage.
3. Bobbin Case Cleaning
Periodically remove the bobbin case and clean any lint or debris from the area. This helps prevent thread jams and ensures smooth bobbin thread delivery.
مشڪلاتون
عام مسئلن ۽ انهن جي حل لاءِ هيٺ ڏنل جدول جو حوالو ڏيو.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڌاڳو ڀڃڻ | Incorrect threading, tension too high, dull needle, wrong needle size. | Re-thread machine, adjust tension, replace needle, use correct needle for fabric. |
| kiڏيل ٽانڪا | Bent or dull needle, incorrect needle insertion, wrong needle type. | Replace needle, ensure needle is fully inserted with flat side to the back, use appropriate needle. |
| Uneven stitches / Looping | Incorrect thread tension, improper bobbin winding or insertion. | Adjust tension dial, re-wind and re-insert bobbin correctly. |
| Machine jams | Thread tangled in bobbin area, lint accumulation. | Turn off machine, remove needle plate and bobbin, clear all tangled threads and lint. |
وضاحتون
- برانڊ: جانوم
- ماڊل: 3128
- پيداوار جي ماپ: 9 x 15 x 12 انچ
- شيء جو وزن: 12 پائونڊ
- ٺاهيندڙ: جانوم
- UPC: 732212231032
- بيٽرين جي ضرورت آهي: نه
وارنٽي ۽ سپورٽ
For warranty information, service, or technical support, please refer to the warranty card included with your purchase or visit the official Janome website. Contacting Janome directly will provide the most accurate and up-to-date support information.
توهان وڌيڪ معلومات ۽ رابطي جي تفصيل تي ڳولي سگهو ٿا Janome Store on Amazon.
