پيداوار ختمview
The WAVE HT196 Parts Opener is a specialized tool designed for separating misassembled or tightly fitted plastic model kit components. It features a durable metal blade and an ergonomic handle, facilitating the careful disassembly of snap-fit parts without the need for adhesives.
حفاظت جي ڄاڻ
خبردار:
This tool features a sharp metal blade. Exercise extreme caution during use to prevent injury. Always handle the tool with care and keep it away from children. Improper use may result in damage to the model parts or personal injury. Refer to the warnings on the product packaging for additional safety guidelines.
پيڪيج مواد
- 1 x WAVE HT196 Parts Opener
- 1 x Protective Blade Cap
سيٽ اپ ڪريو
Before first use, carefully remove the protective cap from the blade. Ensure the blade is clean and free of any debris.
آپريٽنگ هدايتون
The WAVE HT196 Parts Opener is designed to gently separate plastic model kit components. Follow these steps for effective use:
- Identify the Seam: Locate the seam or connection point between the two plastic parts you wish to separate.
- بليڊ داخل ڪريو: Carefully insert the thin edge of the parts opener's blade into the seam. Begin with minimal force to avoid damaging the plastic. The blade is designed to fit into tight gaps.
- نرم دٻاءُ لاڳو ڪريو: Once the blade is partially inserted, apply gentle, even pressure to slowly widen the gap. Avoid sudden or excessive force, which can scratch or break the plastic.
- Widen the Opening: Gradually work the blade along the seam, or use a slight twisting motion if necessary, to further separate the parts. The ergonomic handle provides a secure grip for controlled manipulation.
- Complete Separation: Continue until the parts are fully separated. Inspect the components for any stress marks or damage.
سار سنڀال
After each use, clean the blade with a soft, dry cloth to remove any plastic residue. Always replace the protective cap over the blade when the tool is not in use to prevent accidental injury and protect the blade. Store the parts opener in a dry, safe place.
مشڪلاتون
- Parts are difficult to separate: Ensure the blade is properly inserted into the seam. Apply steady, gentle pressure. Do not force the tool if resistance is too high, as this may damage the parts. Consider trying a different insertion point.
- Scratches on plastic parts: This tool has a metal blade. Always use it with extreme care. If scratches occur, try to insert the blade at a less visible area or use a plastic-safe lubricant to reduce friction. Ensure the blade is clean before use.
وضاحتون
| خاصيت | تفصيل |
|---|---|
| برانڊ | موج |
| ماڊل نمبر | ايڇ ٽي 196 |
| رنگ | نيرو |
| مواد | ڌاتو |
| پيداوار جي ماپ | 3.94"W x 1.18"H |
| شيءِ جو وزن | 2.08 اونس |
| آپريشن موڊ | دستوري |
وارنٽي ڄاڻ
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase. For specific warranty terms and conditions, refer to the product packaging or contact WAVE customer support.
حمايت
For further assistance, product inquiries, or technical support, please refer to the contact information provided on the product packaging or visit the official WAVE webسائيٽ.
