1. تعارف
This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. حفاظت جي ڄاڻ
Always observe the following safety precautions when using the battery charger:
- برقي حفاظت: Ensure the charger is connected to a grounded outlet. Do not operate the charger with damaged cords or plugs. Avoid contact with water or wet surfaces.
- ڌماڪيدار گيس: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
- Eye and Skin Protection: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
- ٻار ۽ غير مجاز عملو: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
- بيٽري مطابقت: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltages.
- وينٽيليشن: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
- ڌار ٿيڻ: Always disconnect the AC power from the charger before disconnecting the battery clamps.
3. پراڊڪٽ ختمview
The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.
3.1. Charger Components
شڪل 1: سامهون view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.
The front panel includes indicator lights to show the charging status:
- ڳاڙهو لال Indicates an error, such as reverse polarity connection or a faulty battery.
- Yellow LED (CHARGE): Illuminates when the battery is actively charging.
- Green LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.
4. سيٽ اپ
Follow these steps to set up your Deca 300300 Matic 116 charger:
- تياري: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
- وينٽيليشن: Place the battery and charger in a well-ventilated area.
- Cl سان نيوamps:
- ڳنڍيو red (+) clamp ڏانهن مثبت (+) ٽرمينل بيٽري جو.
- ڳنڍيو black (-) clamp ڏانهن منفي (-) ٽرمينل بيٽري جو.
اهم: Ensure correct polarity. Reverse polarity will trigger the red error LED.
- پاور سان ڳنڍيو: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.
5. آپريٽنگ هدايتون
Once the charger is set up and connected, it will automatically begin the charging process:
- چارجنگ شروع ڪريو: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
- مانيٽر چارجنگ: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
- Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
- ڌار ٿيڻ:
- پهرين، چارجر کي AC پاور آئوٽليٽ مان ڪڍي ڇڏيو.
- Next, disconnect the black (-) clamp from the battery's negative terminal.
- Finally, disconnect the red (+) clamp from the battery's positive terminal.
6. سار سنڀال
Regular maintenance ensures the longevity and optimal performance of your charger:
- صفائي: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp ڪپڙو. سخت ڪيميائي يا محلول استعمال نه ڪريو.
- ڪيبل ۽ Clamp چڪاس: Periodically inspect the power cord, charging cables, and clamps for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
- اسٽوريج: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, moisture, and extreme temperatures.
7. مسئلا حل ڪرڻ
If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Charger not turning on / No LEDs lit | No AC power; Faulty power outlet; Damaged power cord. | Check power connection; Test outlet with another device; Inspect power cord for damage. |
| ڳاڙهي ايل اي ڊي روشن آهي | Reverse polarity connection; Short circuit; Faulty battery. | Disconnect and re-connect clamps ensuring correct polarity (+ to +, - to -); Check for short circuits; Have battery tested by a professional. |
| Yellow 'CHARGE' LED does not light up | Battery already fully charged; Poor connection to battery terminals; Battery voltage too low or too high for charger. | Check if green 'OK' LED is lit; Clean battery terminals and re-connect clamps securely; Ensure battery is 12V and within 5-90 Ah capacity. |
| بيٽري چارج نه ٿي رهي آهي يا سست چارج ٿي رهي آهي | Poor connection; Battery sulfation; Battery capacity too large for charger. | Ensure secure connections; Battery may be beyond recovery; Verify battery capacity is within 90 Ah maximum. |
8. وضاحتون
Key technical specifications for the Deca 300300 Matic 116 charger:
- برانڊ: ڊيڪا
- ماڊل نمبر: 300300
- بجلي جي فراهمي: 1ph - 230 V - 50/60 Hz
- انٽ واليمtage: 230 وولٽ (AC)
- بيٽري جلدtage: 12 V
- Average Charging Current: 4 اي
- مطابقت رکندڙ بيٽري جا قسم: Lead-acid (wet, AGM, gel)
- بيٽري جي گنجائش جي حد: 5 Ah (minimum) to 90 Ah (maximum)
- پلگ جو قسم: CEE 7/16 Europlug
- ٺاهيندڙ: Deca S.P.A.
9. وارنٽي ۽ سپورٽ
Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.
