PIKO G اسڪيل ماڊل ٽرين اسموڪ يونٽ 5V (ماڊل 36142) هدايت نامو

1. پراڊڪٽ ختمview

This manual provides detailed instructions for the installation, operation, and maintenance of your PIKO G Scale Smoke Unit 5V, Model 36142. This unit is designed to add realistic smoke effects to compatible G Scale model locomotives, enhancing the authenticity of your model railway layout.

Key features of the PIKO 36142 Smoke Unit include:

• Designed for G Scale model trains.
• Operates on a 5V power supply.
• Compact design for integration into various locomotive models.
• Constructed with robust materials for durability.

2. حفاظت جي ڄاڻ

Please read all safety instructions before installing or operating the smoke unit. Failure to follow these instructions may result in injury or damage to the product or other components of your model railway.

• بالغن جي نگراني: This product is recommended for users 14 years and older. Adult supervision is advised for younger users.
• برقي حفاظت: Ensure the power supply to your locomotive is disconnected before installation. The smoke unit requires a 5V power source. Connecting it to a higher voltage نقصان ٿي سگھي ٿو.
• دونھين جو پاڻياٺ: Use only approved smoke fluid specifically designed for model train smoke units. Do not use flammable liquids or other unauthorized substances. Smoke fluid can be an irritant; avoid contact with skin and eyes. Keep out of reach of children.
• گرمي: The smoke unit generates heat during operation. Avoid touching the unit immediately after use. Ensure adequate ventilation within the locomotive body.
• وينٽيليشن: Operate the smoke unit in a well-ventilated area.

3. پيڪيج مواد

پيڪيج کولڻ وقت پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.

• 1x PIKO G Scale Smoke Unit 5V (Model 36142)

4. سيٽ اپ ۽ تنصيب

Installation of the smoke unit requires careful handling and basic knowledge of model train wiring. If you are unsure, consult a qualified technician or refer to your locomotive's specific manual.

1. Prepare Locomotive: Ensure your G Scale locomotive is powered off and disconnected from the track power. Remove the locomotive body to access the interior.
2. Identify Installation Location: Locate a suitable space within your locomotive for the smoke unit. This is typically near the chimney or exhaust stack. Ensure there is enough clearance and that the unit will not interfere with moving parts.
3. وائرنگ: The PIKO 36142 Smoke Unit requires a 5V DC power supply. Identify the appropriate 5V output terminals or connection points within your locomotive's electrical system.
   • ڳنڍيو ڀوري تار from the smoke unit to the positive (+) 5V ٽرمينل
   • ڳنڍيو سفيد تار from the smoke unit to the negative (-) or ground ٽرمينل

   نوٽ: Always refer to your locomotive's wiring diagram for precise connection points and voltage outputs. Incorrect wiring can damage the smoke unit or the locomotive's electronics.
4. محفوظ يونٽ: Once wired, secure the smoke unit in its designated location using appropriate mounting methods (e.g., adhesive, small clips, or a custom bracket). Ensure it is stable and its wires are not pinched or exposed to moving parts.
5. Reassemble Locomotive: Carefully reattach the locomotive body, ensuring no wires are trapped and all components fit correctly.

5. آپريٽنگ هدايتون

Follow these steps to operate your PIKO G Scale Smoke Unit:

1. Fill with Smoke Fluid: Before first use, or when smoke production diminishes, carefully add a few drops of approved model train smoke fluid into the smoke unit's reservoir. Most units have a small opening at the top or side for this purpose. Do not overfill. Refer to your locomotive's manual for specific access to the smoke unit's filling port if it's integrated.
2. پاور لاڳو ڪريو: Place your locomotive on the track and apply power. The smoke unit will begin to heat up.
3. Activate Smoke: Depending on your locomotive's control system, the smoke unit may activate automatically with track power or require activation via a function button on your digital command control (DCC) system or a switch on analog layouts. Consult your locomotive's manual for specific activation methods.
4. Observe Smoke Production: After a short warm-up period (typically 30-60 seconds), the unit should begin producing smoke. The amount of smoke may vary based on the fluid level and power applied.

6. سار سنڀال

Proper maintenance ensures the longevity and optimal performance of your smoke unit.

• Refilling Smoke Fluid: Refill the smoke unit with fluid as needed. Do not allow the unit to run dry for extended periods, as this can damage the heating element.
• صفائي: Periodically inspect the smoke unit's chimney or exhaust port for any residue buildup. Gently clean with a soft, dry brush if necessary. Do not use liquids for cleaning the electrical components.
• اسٽوريج: When not in use for extended periods, ensure the smoke unit is clean and dry. Store the locomotive in a cool, dry place away from direct sunlight.

7. مسئلا حل ڪرڻ

If you encounter issues with your smoke unit, refer to the following troubleshooting guide:

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information or technical support regarding your PIKO G Scale Smoke Unit 5V (Model 36142), please contact PIKO customer service directly. Retain your proof of purchase for warranty claims.

You can typically find contact information on the official PIKO website or within the original product packaging.