Optex Multi-Focus PIR Motion Detector CX-702 User Manual

1. تعارف

The Optex CX-702 is a high-performance Multi-Focus Passive Infrared (PIR) motion detector designed for reliable security applications. It utilizes advanced multi-focus optics to provide precise detection capabilities, minimizing false alarms while ensuring accurate intruder detection. This manual provides essential information for the proper installation, operation, and maintenance of your CX-702 detector.

Figure 1: Optex CX-702 Multi-Focus PIR Motion Detector. This image shows the compact, white casing of the motion detector, typically mounted on a wall.

2. حفاظت جي ڄاڻ

Please read and understand all safety instructions before installing or operating the CX-702 detector. Failure to follow these instructions may result in injury, damage to the device, or improper operation.

• برقي حفاظت: Ensure all power is disconnected before performing any wiring or maintenance. Installation should be performed by qualified personnel in accordance with local electrical codes.
• چڙهڻ: Mount the detector securely to a stable surface to prevent it from falling.
• ماحولياتي حالتون: Do not expose the detector to extreme temperatures, high humidity, or direct water spray.
• مداخلت: Avoid installing the detector near sources of strong electromagnetic interference, heating/cooling vents, or direct sunlight, which can cause false alarms.

3. پيڪيج مواد

انسٽاليشن سان اڳتي وڌڻ کان اڳ پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Optex CX-702 Multi-Focus PIR Motion Detector unit
• Mounting bracket (if applicable)
• چڙهڻ اسڪرو ۽ لنگر
• هدايت نامو (هي دستاويز)

4. سيٽ اپ ۽ تنصيب

Proper installation is crucial for optimal performance of the CX-702 detector.

4.1 چڙهڻ وارو هنڌ

• The CX-702 is designed for ڀت جبل تنصيب.
• Choose a location where the detector has an unobstructed view علائقي جو تحفظ ڪيو وڃي.
• Avoid aiming the detector directly at windows, heat sources, or areas with significant air currents.
• Recommended mounting height is typically between 2.1 to 2.7 meters (7 to 9 feet) for optimal coverage.

4.2 وائرنگ

The CX-702 operates on تار ٿيل برقي power. Refer to the wiring diagram inside the detector casing for specific terminal connections. Typically, connections include:

• پاور ان پٽ: Connect to a stable DC power source (e.g., 9-16V DC). Observe polarity.
• الارم جو ٻاھر Connect to the alarm control panel's zone input. This is usually a normally closed (NC) relay output.
• Tamper ٻاھر نڪتو: (If available) Connect to a tamper zone on the control panel. This activates if the detector cover is removed.

4.3 حساسيت جي ترتيب

The detector may feature internal jumpers or potentiometers for adjusting sensitivity. Consult the internal diagram for specific settings. Adjust sensitivity to suit the environment, balancing detection reliability with false alarm immunity.

5. آپريٽنگ هدايتون

Once installed and powered, the Optex CX-702 detector will begin its warm-up period, typically lasting a few minutes. During this time, the detector may not be fully operational.

5.1 Detection Principle

The CX-702 uses Passive Infrared (PIR) technology to detect changes in infrared energy (heat) within its detection pattern. When a person moves through the detection zones, the detector senses the change in infrared energy and triggers an alarm.

5.2 ڳولڻ جي حد

The detector offers a وڌ ۾ وڌ رينج تائين 70 فوٽ (approximately 21 meters). The actual coverage area depends on mounting height, sensitivity settings, and environmental factors.

5.3 LED اشارو

Most PIR detectors include an LED indicator. This LED typically illuminates when motion is detected. During normal operation, the LED may be disabled to prevent drawing attention to the detector. Refer to the internal settings for LED control.

6. سار سنڀال

Regular maintenance ensures the long-term reliability and performance of your CX-702 detector.

• صفائي: Periodically clean the detector lens with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents, as these can damage the lens and affect detection.
• رڪاوٽ جي چڪاس: Ensure that no objects are obstructing the detector's field of view.
• ڪارڪردگي ٽيسٽ: Test the detector's functionality regularly (e.g., monthly) by walking through its detection pattern to confirm it triggers an alarm.

7. مسئلا حل ڪرڻ

If you experience issues with your CX-702 detector, refer to the following common problems and solutions:

• Detector not triggering:
  • پاور سپلائي ڪنيڪشن چيڪ ڪريو.
  • Verify wiring to the alarm panel.
  • پڪ ڪريو ته ڳولا وارو علائقو رڪاوٽن کان پاڪ آهي.
  • Increase sensitivity settings if necessary.
• غلط الارم:
  • Check for heat sources (heaters, direct sunlight) or air currents (vents) in the detection area.
  • Ensure the detector is not aimed at windows where temperature changes or moving objects outside could cause detection.
  • حساسيت جي سيٽنگن کي گھٽايو.
  • Clean the detector lens.
• Tampالارم:
  • Ensure the detector cover is securely closed.
  • چيڪ ڪريو ٽيamper سوئچ ڪنيڪشن.

8. وضاحتون

9. وارنٽي ڄاڻ

Optex products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Optex webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

10. ٽيڪنيڪل سپورٽ

If you require further assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact Optex customer support or your authorized dealer. Contact information can typically be found on the official Optex webسائيٽ: www.optexamerica.com