1. تعارف
The Claber Programmable Solenoid Valve with Programmer is an advanced device designed to automate irrigation systems. It can be installed directly on a water outlet or tap, and its robust, leak-proof design (IP68 rated) allows it to function even when fully immersed. The integrated programmer offers flexible scheduling with up to 6 daily programs, controlled via a user-friendly three-button interface and a large display.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Claber Solenoid Valve to ensure optimal performance and longevity.
Figure 1: Claber Programmable Solenoid Valve with Programmer. This image shows the main unit of the solenoid valve, featuring the integrated digital programmer on top and the water inlet/outlet connections at the bottom.
2. حفاظت جي ڄاڻ
Please read all safety instructions carefully before installing and operating the device. Failure to follow these instructions may result in damage to the product or personal injury.
- ٻارن کي هن ڊوائيس کي هلائڻ جي اجازت نه ڏيو. هي پيداوار ٻارن جي استعمال لاء مناسب نه آهي.
- Avoid animal interaction. Keep the device away from animals to prevent damage or interference with operation.
- Ensure the operating pressure is within the specified range of 0.5 to 12 bar.
- Use only a 9V alkaline battery as specified.
- Do not attempt to disassemble or repair the unit beyond the instructions provided in this manual.
- When installing underground, ensure proper drainage and protection from physical damage.
3. پيداوار جا حصا
The Claber Programmable Solenoid Valve consists of the following main components:
- Solenoid Valve Unit: The main body with 1-inch F (26-34 mm) input and outlet threads.
- Integrated Programmer: Digital display and three control buttons for setting irrigation schedules.
- بيٽري جو خانو: Located beneath the programmer, designed for a 9V alkaline battery (not included).
- Leak-proof Lid (IP68): Protects the electronic components from water ingress.
4. سيٽ اپ ۽ تنصيب
4.1. بيٽري لڳائڻ
The programmer requires one 9V alkaline battery (not included) for operation. A fresh battery is typically sufficient for an entire season.
- Gently unscrew and remove the top programmer unit from the valve body by turning it counter-clockwise.
- Locate the battery compartment on the underside of the programmer unit.
- هڪ نئين 9V الڪائن بيٽري داخل ڪريو، صحيح پولارٽي کي يقيني بڻائي.
- Carefully reattach the programmer unit to the valve body, aligning the threads and turning clockwise until secure. Ensure the seal is properly seated to maintain IP68 rating.
Figure 2: Battery Installation. This diagram illustrates the steps for removing the programmer unit, inserting the 9V battery into its compartment, and reattaching the unit to the valve body.
4.2. جسماني تنصيب
The solenoid valve can be installed directly onto a tap or a water outlet. It can be mounted vertically or horizontally. Ensure the flow direction indicated on the valve body (marked 'FLOW') matches the water flow.
- Above Ground Installation: Connect the 1-inch F (26-34 mm) input thread to your water source and the output thread to your irrigation line. Hand-tighten or use a wrench gently to ensure a leak-free connection.
- زير زمين تنصيب: The valve is IP68 rated and can be installed in a cockpit or valve box for protection. Ensure the valve is placed on a bed of gravel for drainage and that the valve box allows for easy access for maintenance.
شڪل 3: مثالample of Underground Installation. This image depicts the Claber solenoid valve installed underground within a valve box, connected to an irrigation line, demonstrating a typical setup for a hidden system.
Figure 4: Connection Diagram. This image shows a schematic of the solenoid valve connected in an irrigation system, illustrating the input and output connections and the direction of water flow.
5. آپريٽنگ هدايتون
The Claber programmer is designed for easy operation with three control buttons and a clear display.
5.1. بنيادي پروگرامنگ
The programmer allows for setting watering times from 1 minute up to 23 hours and 59 minutes, with the possibility of up to 6 watering cycles per day. It supports both manual and weekly programming, with options to exclude specific days of the week.
- ڏيکاريو: The large format display communicates all necessary information using symbols and numbers.
- بٽڻ: Use the three buttons (typically 'Mode', 'Up', 'Down' or similar) to navigate through menus and adjust settings.
- وقت ۽ ڏينهن مقرر ڪرڻ: Before programming, ensure the current time and day are correctly set on the programmer.
- پروگرام ٺاهڻ: Follow the on-screen prompts to set start times, duration, and frequency for each of the up to 6 daily programs.
- دستياب پاڻي ڏيڻ The unit typically includes a manual override function for immediate watering outside of scheduled programs. Consult the on-screen menu for this option.
6. سار سنڀال
6.1. بيٽري مٽائڻ
Replace the 9V alkaline battery annually or when the low battery indicator appears on the display. Refer to Section 4.1 for detailed battery installation instructions.
6.2. سياري جي موسم ۽ اسٽوريج
During winter months or periods of freezing temperatures, it is recommended to remove the programmer unit and store it in a sheltered, frost-free location. The electronic components are separable from the plumbing for convenient removal and storage.
- Turn off the main water supply to the valve.
- Drain any remaining water from the valve and irrigation lines.
- Unscrew and remove the programmer unit from the valve body.
- Store the programmer in a dry, protected area where temperatures do not drop below +5 °C.
- If the valve body remains installed, ensure it is completely drained and protected from freezing.
6.3. صفائي
Periodically clean the exterior of the valve and programmer with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the display and buttons are free from dirt and debris for clear visibility and proper function.
7. مسئلا حل ڪرڻ
If you encounter issues with your Claber Programmable Solenoid Valve, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Programmer display is blank or dim. | گهٽ يا ختم ٿيل بيٽري. | Replace the 9V alkaline battery. |
| Valve does not open/close as programmed. | Incorrect programming; Low battery; Water pressure too low/high; Debris in valve. | Verify program settings; Replace battery; Check water pressure (0.5-12 bar); Inspect valve for obstructions. |
| ڪنيڪشن مان پاڻي جو رسڻ. | ڍلا ڪنيڪشن؛ خراب ٿيل او-رنگ/سيل. | Tighten connections; Inspect and replace O-rings/seals if damaged. |
| Valve not responding to button presses. | Battery issue; Electronic malfunction. | بيٽري تبديل ڪريو. جيڪڏهن مسئلو برقرار رهي، ته ڪسٽمر سپورٽ سان رابطو ڪريو. |
If the issue persists after attempting these solutions, please contact Claber customer support for further assistance.
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | CL0000908260000 |
| مواد | پي اي 6 |
| طول و عرض (L x W x H) | 7.48 x 4.33 x 7.68 inches (180x105x190 cm) |
| بندرگاهن جو تعداد | 2 |
| والو جو قسم | Solenoid والو |
| Input/Output Thread | 1 inch F (26-34 mm) |
| جلدtage | 9 وولٽ (DC) |
| بيٽري جو قسم | 9V Alkaline (not included) |
| آپريٽنگ پريشر | 0.5 کان 12 بار |
| وهڪري جي شرح | 4.6 to 96 litres/minute |
| آپريٽنگ جي درجه حرارت | +5 °C کان +70 °C |
| تحفظ جي درجه بندي | IP68 (leak-proof, works in total immersion) |
| پروگرامنگ سائيڪلون | Up to 6 daily programs |
| پاڻي ڏيڻ جو عرصو | 1 منٽ کان 23 ڪلاڪ 59 منٽ |
9. وارنٽي ۽ سپورٽ
9.1. وارنٽي ڄاڻ
For detailed warranty information regarding your Claber Programmable Solenoid Valve, please refer to the warranty card included with your product or visit the official Claber webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
9.2. ڪسٽمر سپورٽ
If you require further assistance, have questions about installation, programming, or troubleshooting that are not covered in this manual, please contact Claber customer support. Contact details can typically be found on the official Claber webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.
