Eiko H1155

ايڪو H1155 H11 سيريز هيلوجن متبادل بلب هدايت نامو

تعارف

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

حفاظت جي ڄاڻ

پيداوار ختمview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

Eiko H1155 H11 Series Halogen Replacement Bulb

شڪل 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

سيٽ اپ ۽ تنصيب

  1. تياري: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
  2. بلب تائين رسائي: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
  3. وائرنگ ختم ڪريو: پراڻي بلب جي پوئين پاسي کان بجليءَ جي ڪنيڪٽر کي احتياط سان ڌار ڪريو.
  4. پراڻو بلب هٽايو: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
  5. نئون بلب لڳايو: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
  6. وائرنگ ٻيهر ڳنڍيو: بجليءَ جي ڪنيڪٽر کي نئين بلب سان ٻيهر ڳنڍيو.
  7. ٽيسٽ ڪارڪردگي: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
  8. ٻيهر گڏ ڪرڻ: بلب تائين رسائي لاءِ هٽايل ڪنهن به ڍڪ يا جز کي ٻيهر انسٽال ڪريو.

نوٽ: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

آپريشن

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

سار سنڀال

مشڪلاتون

مسئلوممڪن سببحل
بلب نه ٿو روشن ٿئي.Incorrect installation, loose connection, blown fuse, faulty wiring, or defective bulb.Check bulb seating and electrical connection. Inspect vehicle's fuse box for a blown headlight fuse. Consult a qualified mechanic if wiring is suspected. Replace bulb if defective.
Bulb is dim or flickers.Aging bulb, poor electrical connection, or voltage مسئلو.Replace both bulbs for optimal performance. Check connections. Consult a mechanic for voltage مسئلا.
بلب جلدي سڙي ٿو.جلدtage spikes, touching the glass during installation, or excessive vibration.Ensure proper installation without touching the glass. Have vehicle's electrical system checked for voltagاي بي ضابطگيون.

وضاحتون

خاصيتتفصيل
برانڊايڪو
ماڊل نمبرايڇ 1155
بلب جو قسمهالوجن
جلدtage12.8 Volts (Nominal), 13.2 Volts (Max)
واتtage55 واٽ
روشني1345 Lumens
Average Operating Life800 ڪلاڪ
بنيادي قسمRight-Angle Pre-Focus H11
بلب جي ماپT3-1/4
شيءِ جو وزن0.8 اونس
يو پي سي031293811646

وارنٽي ۽ سپورٽ

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting

لاڳاپيل دستاويز - ايڇ 1155

اڳيview EIKO LED T8 لينئر ٽيوب لڳائڻ جون هدايتون
EIKO LED T8 ٽائپ B لينئر ٽيوب لائيٽن لاءِ جامع انسٽاليشن جون هدايتون، جيڪي حفاظتي احتياط، سار سنڀال، ۽ فلوروسينٽ ليمينيئرز کي ريٽروفٽ ڪرڻ لاءِ تفصيلي وائرنگ ڊاگرام کي ڍڪينديون آهن.
اڳيview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
اڳيview EIKO VL1 سيريز LED واليوميٽرڪ ٽرافر لڳائڻ جون هدايتون
EIKO VL1 سيريز LED واليوميٽرڪ ٽرافر لاءِ جامع انسٽاليشن گائيڊ، جيڪو مٿي کي ڍڪيندو آهيview، حفاظتي احتياط، انسٽاليشن جا مرحلا، وائرنگ اسڪيميٽڪس، ۽ سينسر انسٽاليشن. پاور ۽ سي سي ٽي چونڊ شامل آهي.
اڳيview EIKO Z10 مائڪرو ويڪرو بائي ليول ڊمنگ سينسر فوٽو سيل انسٽاليشن گائيڊ سان
EIKO Z10 مائڪرو ويڪرو بائي ليول ڊمنگ سينسر لاءِ فوٽو سيل سان جامع انسٽاليشن گائيڊ، صحيح سيٽ اپ ۽ آپريشن لاءِ وضاحتون، سينسر ڪوريج، ۽ FCC تعميل جي معلومات جي تفصيل سان.
اڳيview EIKO CSX1 سيريز LED ڪمرشل پٽي پريميئم انسٽاليشن جون هدايتون
EIKO CSX1 سيريز LED ڪمرشل اسٽرپ پريميئم فڪسچر لاءِ جامع انسٽاليشن گائيڊ، مٿاڇري جي ماؤنٽ، چين ماؤنٽ، ۽ اختياري لوازمات جي تنصيب کي ڍڪڻ.
اڳيview EIKO LED سرفيس ڪينپي اسڪوائر لڳائڻ جون هدايتون
هي دستاويز EIKO LED سرفيس ڪينوپي اسڪوائر فڪسچر لاءِ تفصيلي انسٽاليشن هدايتون مهيا ڪري ٿو، جنهن ۾ حفاظتي احتياط، سرفيس ماؤنٽنگ، سائڊ وائرنگ، پينڊنٽ ماؤنٽنگ، پاور ايڊجسٽمينٽ، ۽ Z10 سينسر جي انسٽاليشن شامل آهن.