1. حفاظت جي ڄاڻ
مھرباني ڪري ھن ٿرموسٽٽ کي انسٽال ڪرڻ يا هلائڻ کان پھريان سڀ ھدايتون احتياط سان پڙھو. انھن ھدايتن تي عمل ڪرڻ ۾ ناڪامي ملڪيت کي نقصان، ذاتي زخم، يا موت جو سبب بڻجي سگھي ٿي.
- انسٽاليشن يا سروسنگ کان اڳ هميشه مين فيوز يا سرڪٽ بريڪر پينل تي هيٽنگ/کولنگ سسٽم جي بجلي بند ڪريو.
- This thermostat is designed for 24 Volt AC or 2 AA alkaline battery operation. Do not use on circuits exceeding specified voltage.
- سڀني وائرنگ کي مقامي اليڪٽريڪل ڪوڊس ۽ آرڊيننس جي مطابق هجڻ گهرجي.
- Do not short (jumper) across terminals on the gas valve or at the system to test the thermostat. This will damage the thermostat and void the warranty.
2. پراڊڪٽ ختمview
The Braeburn 1020 is a digital non-programmable thermostat designed for simple and reliable temperature control. It is compatible with single stagاي گيس، تيل، يا برقي حرارتي يا کولنگ سسٽم، بشمول سنگل ايسtage heat pumps and 250mV – 750mV millivolt heating systems.
اهم خاصيتون:
- Large 3 sq. in. display with bright blue backlight for easy readability.
- Adjustable temperature limits for customized control.
- Can be powered by 24 Volt AC or two 'AA' alkaline batteries (3.0 Volt DC).
- Permanent memory retains all user and temperature settings during power outages.
- Separate O & B terminals for heat pump applications.
- Compressor short cycle protection to prevent damage to your HVAC system.
- Adjustable temperature differential for precise temperature control.
- Low battery indication for timely battery replacement.
- ESD guard electronic circuitry for enhanced durability.
- Front access reset button to return user settings to default values.
- Fahrenheit or Celsius temperature display option.
تصوير: سامهون view of the Braeburn 1020 Thermostat, showing the display, temperature adjustment buttons, system mode switch, and fan mode switch.
3. تنصيب ۽ سيٽ اپ
3.1 قبل از انسٽاليشن چيڪ لسٽ
- Ensure power to the HVAC system is OFF at the circuit breaker.
- ضروري اوزار گڏ ڪريو: اسڪرو ڊرايور، تار اسٽرپر، ڊرل (جيڪڏهن نوان سوراخ لڳائي رهيا آهيو).
- Confirm your system type is compatible (single stage heat/cool, heat pump, or millivolt).
3.2 ٿرموسٽٽ لڳائڻ
- Remove the old thermostat. Note the wire connections before disconnecting.
- Separate the new thermostat from its sub-base.
- Position the sub-base on the wall. It can be mounted to a horizontal junction box.
- Mark the mounting holes and drill if necessary.
- Secure the sub-base to the wall using the provided screws.
3.3 وائرنگ جون هدايتون
Connect the wires from your HVAC system to the corresponding terminals on the thermostat's sub-base. Refer to your old thermostat's wiring or your HVAC system's manual for specific wire functions. Common terminals include R, C, W, Y, G, O, B.
Typical Wiring (Consult HVAC manual for specifics):
- R: 24V AC Hot
- C: 24V AC Common (optional, for continuous backlight)
- W: گرمي رلي
- Y: ٿڌي رلي
- G: فين جو رلي
- او / بي: Reversing Valve (Heat Pump systems)
3.4 بيٽري لڳائڻ
If not using 24V AC power, or for battery backup, insert two fresh 'AA' alkaline batteries into the battery compartment on the back of the thermostat. Ensure correct polarity (+/-).
3.5 Initial Configuration Switches
On the back of the thermostat, locate the configuration switches:
- F°/C° Switch: Selects Fahrenheit or Celsius temperature display.
- HG/HE Switch: Selects Gas/Electric fan operation (HG for Gas, HE for Electric).
- CONV/HP Switch: Selects Conventional system (furnace/AC) or Heat Pump system.
Set these switches according to your specific HVAC system requirements before snapping the thermostat onto the sub-base.
Image: Braeburn 1020 Thermostat shown with approximate dimensions (3.9 inches / 9 cm height indicated).
4. آپريشن
4.1 درجه حرارت مقرر ڪرڻ
Use the UP and DOWN arrow buttons on the right side of the thermostat to adjust the desired temperature (setpoint). The display will show the current room temperature and the setpoint.
4.2 سسٽم موڊ جي چونڊ
Use the SYSTEM switch located below the display to select the desired operating mode:
- عمده: The thermostat will activate the cooling system when the room temperature rises above the setpoint.
- بند ڪريو The heating and cooling systems are turned off.
- گرمي: The thermostat will activate the heating system when the room temperature falls below the setpoint.
4.3 فين موڊ جي چونڊ
Use the FAN switch located below the display to select the desired fan operation:
- اوٽو: The fan will run only when the heating or cooling system is actively operating. This is the most common setting.
- کولڻ: The fan will run continuously, regardless of whether the heating or cooling system is active.
4.4 بيڪ لائيٽ آپريشن
The display backlight will illuminate when any button is pressed, making it easier to read in low-light conditions. It will automatically turn off after a short period of inactivity.
4.5 ري سيٽ بٽڻ
A small reset button is located on the front of the thermostat (often labeled 'RESET'). Pressing this button with a small pointed object (like a paperclip) will return all user settings to their factory default values. This can be useful for troubleshooting or starting fresh with settings.
5. سار سنڀال
5.1 بيٽري مٽائڻ
When the low battery indicator appears on the display, replace the two 'AA' alkaline batteries promptly. To replace, gently pull the thermostat straight off the sub-base, remove old batteries, insert new ones ensuring correct polarity, and snap the thermostat back onto the sub-base.
5.2 صفائي
ٿرموسٽيٽ جي ٻاهرين حصي کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو. ٿرموسٽٽ تي سڌو سنئون مائع اسپري ڪرڻ کان پاسو ڪريو.
6. مسئلا حل ڪرڻ
If you experience issues with your Braeburn 1020 thermostat, refer to the table below for common problems and solutions.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊسپلي خالي يا مدھم آهي. | Dead or low batteries; No 24V AC power. | Replace batteries. Check circuit breaker for HVAC system. Ensure C-wire is connected if using 24V AC. |
| گرمي/ٿڌائڻ وارو نظام جواب نه ڏئي رهيو آهي. | System switch in OFF position; Incorrect wiring; Blown fuse in HVAC system; Compressor short cycle delay active. | Set system switch to HEAT or COOL. Verify wiring connections. Check HVAC system fuse. Wait 5 minutes for compressor delay to clear. |
| گرمي پد جي پڙهائي غلط لڳي ٿي. | Thermostat located near heat source/draft; Internal sensor issue. | Ensure thermostat is not exposed to direct sunlight, drafts, or heat sources. Press the reset button. |
| فين آٽو موڊ ۾ مسلسل هلندو آهي. | Fan switch set to ON. | Set fan switch to AUTO. |
If problems persist after attempting these solutions, contact a qualified HVAC technician or Braeburn customer support.
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 1020 |
| طول و عرض (H x W x D) | 3.70” x 5.16” x 1.38” (approx. 6.2 x 4 x 1.7 inches) |
| طاقت جو ذريعو | 24 Volt AC or 2 'AA' Alkaline Batteries (3.0 Volt DC) |
| درجه حرارت ڪنٽرول رينج | 45°F کان 90°F (7°C کان 32°C) |
| درجه حرارت جي درستگي | +/- 1°F (+/- 0.5°C) |
| نمي واري حد | 5٪ کان 95٪ نسبتي رطوبت (غير ڪنڊينسنگ) |
| ڏيکاريو Backlight | روشن نيرو |
| ياداشت | Non-volatile (retains settings during power loss) |
| سسٽم مطابقت | اڪيلو ايسtage Gas, Oil, Electric; Single Stage Heat Pumps; 250mV - 750mV Millivolt Heating Systems |
| ڪنٽرولر جو قسم | دٻايو بٽڻ |
| خاص خاصيتون | Low Battery Indicator, Temperature Display, Adjustable Temperature Limits, Compressor Short Cycle Protection |
8. وارنٽي ۽ سپورٽ
8.1 وارنٽي ڄاڻ
Braeburn thermostats are designed for reliability and durability. For specific warranty terms and conditions, please refer to the warranty card included with your product packaging or visit the official Braeburn webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
8.2 ٽيڪنيڪل سپورٽ
If you require technical assistance or have questions not covered in this manual, Braeburn offers dedicated technical support. You can typically find contact information for their technical hotline on their official webسائيٽ يا پيداوار جي دستاويز ۾.
For the most up-to-date support information, please visit the official Braeburn webسائيٽ: www.braeburnonline.com
