AIMS پاور 8000 واٽ 12 وولٽ تبديل ٿيل سائن پاور انورٽر يوزر مينوئل

1. تعارف

This manual provides essential information for the safe and efficient operation of your AIMS Power PWRINV8KW12V 8000 Watt 12 Volt Modified Sine Power Inverter. This device is designed to convert 12 Volts DC (Direct Current) battery power into 120 Volts AC (Alternating Current) household power, suitable for a wide range of applications. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. حفاظت جي ڄاڻ

خبردار: Improper installation or use of this inverter can result in serious injury, death, or equipment damage. Always follow these safety guidelines:

• برقي خطرو: This inverter produces high voltage AC power. Treat the output terminals with the same caution as a standard AC wall outlet.
• بيٽري جي حفاظت: Work in a well-ventilated area when connecting batteries. Batteries can produce explosive gases. Do not smoke or allow sparks or flames near batteries.
• مناسب وائنٽيليشن: Ensure the inverter is installed in an area with adequate airflow to prevent overheating. Do not block cooling vents.
• گرائونڊنگ: The inverter must be properly grounded. Refer to local electrical codes for grounding requirements.
• ڪيبل سائيز: Use appropriately sized DC input cables (e.g., 2 sets of 4/0 cable for 8000 watts) to minimize voltagاي ڇڏي ڏيو ۽ وڌيڪ گرم ٿيڻ کان روڪيو.
• نمي: Do not expose the inverter to rain, moisture, or spray.
• قابل عملو: Installation and servicing should be performed by qualified personnel familiar with electrical systems.
• تجويز 65 خبردار: ھن پراڊڪٽ ۾ ٿي سگھي ٿو ڪيميڪل شامل آھن رياست ڪيليفورنيا کي معلوم ٿي سگھي ٿو ڪينسر ۽ پيدائشي نقص يا ٻيون پيدائشي نقصان. هٿ ڪرڻ کان پوءِ هٿ ڌوئڻ.

3. مصنوعات جون خاصيتون

The AIMS Power PWRINV8KW12V inverter is equipped with several features for reliable and safe operation:

• هاء پاور آئوٽ: Provides 8000 Watts of continuous output power and 16000 Watts of surge peak power.
• Digital Meters: Integrated volt meter on the front panel to monitor battery voltage and an amp موجوده استعمال جي نگراني لاءِ ميٽر.
• اي سي ٽرمينل بلاڪ: Direct connect terminal block for hardwiring AC loads, in addition to standard AC output sockets.
• حفاظتي خاصيتون: Includes Over Temperature, Over Load, High Voltagاي، گھٽ حجمtage, and Short Circuit protection.
• LED اشارا: Dedicated LEDs for Over Temperature and Over Load conditions.
• کولنگ سسٽم: Thermally controlled single cooling fan for optimal temperature regulation.
• ريموٽ صلاحيت: اختياري ريموٽ آن/آف سوئچ لاءِ پري وائرڊ.
• پائيدار تعمير: Aluminum case for optimal cooling and a pre-slotted mounting plate for easy installation.
• خودڪار ري سيٽ: Most fault conditions feature an auto-reset function.

4. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the performance and safety of your inverter. Follow these steps carefully:

1. چڙهڻ جو هنڌ: Choose a dry, well-ventilated area away from direct sunlight, heat sources, and flammable materials. The inverter should be mounted securely using its pre-slotted mounting plate. Ensure sufficient space around the unit for airflow, especially around the cooling fan and vents.
2. DC Input Wiring:
   • Connect the inverter directly to a 12 Volt battery bank. For 8000 Watts of power, two sets of 4/0 gauge cables are required for both positive and negative connections to minimize voltagاي ڇڏي ڏيو ۽ وڌيڪ گرم ٿيڻ کان روڪيو.
   • انورٽر جي مثبت (+) ٽرمينل کي بيٽري بينڪ جي مثبت (+) ٽرمينل سان ڳنڍيو.
   • انورٽر جي منفي (-) ٽرمينل کي بيٽري بينڪ جي منفي (-) ٽرمينل سان ڳنڍيو.
   • Ensure all connections are tight and secure. Loose connections can cause excessive heat and damage.
3. گرائونڊنگ: Connect the inverter's chassis ground terminal to a reliable earth ground. This is a critical safety step.
4. اي سي آئوٽ پٽ ڪنيڪشن:
   • The inverter features quadruple Type 2 - 3 prong AC output sockets for standard appliances.
   • For higher power loads or permanent installations, use the AC direct connect terminal block. Ensure the main power ON/OFF switch is OFF before connecting wires to the terminal block. Connect Live, Neutral, and Earth wires as indicated.
5. Remote Switch (Optional): If using an optional remote switch, connect it to the designated remote port on the inverter.

تصوير 1: ريڙهه view of the AIMS Power 8000 Watt Inverter, highlighting the DC input terminals (positive and negative) and the cooling fan. This view is essential for understanding DC power connections.

تصوير 2: Front panel of the AIMS Power 8000 Watt Inverter, displaying the ON/OFF switch, Over Temp and Over Load LED indicators, battery voltage ۽ amperage meters, AC output sockets, and the AC terminal block for direct wiring.

تصوير 3: تفصيلي view of the AC terminal block on the AIMS Power 8000 Watt Inverter's front panel. This image illustrates the connections for Live, Neutral, and Earth wires, crucial for hardwired AC loads.

5. آپريٽنگ هدايتون

1. پاور آن: After ensuring all connections are secure and correct, switch the inverter's main power ON/OFF switch to the 'ON' position. The inverter will perform a self-test, and the cooling fan may briefly activate.
2. نگراني: Observe the digital volt meter to confirm the battery voltage is within the operating range (10 to 15 Volts DC). The amp meter will display the current draw when AC loads are connected.
3. Connecting AC Loads: Plug your AC appliances into the output sockets or ensure your hardwired loads are connected to the AC terminal block. Start with smaller loads and gradually add larger ones.
4. Understanding Indicators:
   • Over Temp LED: Illuminates if the inverter's internal temperature exceeds safe operating limits. The inverter may shut down to protect itself.
   • اوور لوڊ ايل اي ڊي: Illuminates if the connected AC load exceeds the inverter's continuous or surge capacity. The inverter may shut down.
5. بجلي بند: Before disconnecting any AC loads or servicing the inverter, switch the main power ON/OFF switch to the 'OFF' position.

تصوير 4: The AIMS Power 8000 Watt Inverter demonstrating its capability to power various appliances, tools, compressors, and pumps. This illustrates the versatility of the inverter for different applications.

6. سار سنڀال

باقاعده سار سنڀال توهان جي انورٽر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي:

• صفائي: Periodically clean the exterior of the inverter, especially the cooling fan and vents, to prevent dust and debris buildup. Use a dry cloth. Do not use liquids or solvents.
• ڪنيڪشن چيڪ: سڀني ڊي سي ۽ اي سي ڪنيڪشنن کي تنگي لاءِ باقاعدي طور تي معائنو ڪريو. ڍلا ڪنيڪشن بجلي جي نقصان، اوور هيٽنگ، ۽ امڪاني باهه جي خطرن جو سبب بڻجي سگهن ٿا.
• بيٽري صحت: Ensure your battery bank is well-maintained and charged. The inverter's performance is directly dependent on the health of your batteries.
• ماحول: Verify that the installation environment remains dry and well-ventilated.

7. مسئلا حل ڪرڻ

If you encounter issues with your inverter, refer to the following troubleshooting guide:

The inverter features an auto-reset function for most fault conditions. If a fault persists after attempting the solutions above, disconnect the inverter from the battery bank and contact AIMS Power support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

AIMS Power stands behind its products with over 20 years of experience in the inverter business. For technical support, warranty claims, or sales inquiries, please contact AIMS Power directly. All support services are provided from Nevada, USA.

Refer to your product packaging or the official AIMS Power webتازي وارنٽي شرطن ۽ رابطي جي معلومات لاءِ سائيٽ.

10. اضافي وسيلا

For further information or to explore other AIMS Power products, visit the official AIMS Power store:

ايميزون تي AIMS پاور اسٽور

وڊيوز تي نوٽ: No official product videos from the seller were available in the provided data for embedding in this manual.