1. تعارف
Thank you for choosing the Timberland Washington Summit Digital Sensor Pacer Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new timepiece. Designed for active individuals, this watch features a digital display, sensor-based functions including a finger touch heart rate meter, and a pacer function.
اهم خاصيتون شامل آهن:
- ڊجيٽل وقت ڊسپلي
- Finger touch heart rate meter
- Pacer function
- اسٽاپ واچ
- Light function for low-light conditions
- Durable polyurethane case and strap
- Mineral glass with sapphire coating
- Water-resistant to 30 meters (99 feet)
2. حفاظت جي ڄاڻ
- پاڻي جي مزاحمت: The watch is water-resistant to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is نه گرم پاڻي سان ترڻ، ڊائيونگ، يا شاور وٺڻ لاءِ موزون، ڇاڪاڻ ته ٻاڦ سيلن ۾ داخل ٿي سگهي ٿي.
- گرمي پد: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this may affect battery life and accuracy.
- اثر: Protect the watch from strong impacts or shocks.
- ڪيميائي: Avoid contact with solvents, detergents, perfumes, and cosmetics, as they may damage the case, strap, or seals.
- بيٽري: Do not attempt to open the watch case or replace the battery yourself unless you have the proper tools and expertise. Improper handling can damage the watch and void the warranty.
3. پراڊڪٽ ختمview
Familiarize yourself with the components and controls of your Timberland Washington Summit watch.
تصوير 3.1: سامهون view of the Timberland Washington Summit Digital Sensor Pacer Watch. The digital display shows time, day, and date. Buttons are visible on the left and right sides of the case, labeled 'LIGHT', 'MODE', 'SENSOR', and 'LAP/RESET'. The bezel indicates compass directions and 'FINGER TOUCH HEART RATE METER'.
ڏسو اجزاء:
- ڊجيٽل ڊسپلي Shows time, date, day, and various function indicators.
- ڪيس: Durable polyurethane case.
- پٽي: Comfortable orange polyurethane strap.
- بٽڻ:
- روشني (مٿي کاٻي): بيڪ لائيٽ کي چالو ڪري ٿو.
- موڊ (هيٺ کاٻي): Cycles through different watch modes (Time, Stopwatch, Alarm, Pacer, Heart Rate).
- SENSOR (Top Right): Used for activating sensor functions, specifically the heart rate monitor.
- LAP/RESET (Bottom Right): Used for lap timing in stopwatch mode and resetting values in setting modes.
- سينسر ايريا: Located on the bezel, marked "FINGER TOUCH HEART RATE METER". This area interacts with your finger to measure heart rate.
4. سيٽ اپ
4.1 شروعاتي وقت ۽ تاريخ جي سيٽنگ
- From the Timekeeping Mode, press and hold the موڊ button until the seconds begin to flash, indicating you are in setting mode.
- کي دٻايو موڊ button repeatedly to cycle through the settings: Seconds → Hours → Minutes → Year → Month → Day.
- While a setting is flashing, use the LAP/RESET button to increase the value. Hold the button to change values rapidly.
- هڪ دفعو سڀئي سيٽنگون ترتيب ڏنل آهن، دٻايو موڊ button again to exit the setting mode and return to Timekeeping Mode.
4.2 12/24-Hour Format Selection
ٽائيم ڪيپنگ موڊ ۾، دٻايو LAP/RESET button to toggle between 12-hour (with 'PM' indicator) and 24-hour formats.
5. آپريٽنگ هدايتون
5.1 موڊ جي چونڊ
کي دٻايو موڊ واچ جي مختلف ڪمن کي هلائڻ لاءِ بٽڻ:
Timekeeping → Stopwatch → Alarm → Pacer → Heart Rate Monitor → Timekeeping
5.2 Using the Backlight (LIGHT Button)
کي دٻايو روشني button (top left) to illuminate the display for a few seconds. This is useful in low-light conditions.
5.3 اسٽاپ واچ فنڪشن
- ٽائيم ڪيپنگ موڊ مان، دٻايو موڊ until you reach the Stopwatch mode. The display will show "00:00:00".
- کي دٻايو سينسر button (top right) to start the stopwatch.
- کي دٻايو سينسر اسٽاپ واچ کي روڪڻ لاءِ ٻيهر بٽڻ دٻايو.
- While paused, press the LAP/RESET button (bottom right) to reset the stopwatch to "00:00:00".
- To record lap times, press the LAP/RESET button while the stopwatch is running. The display will momentarily show the lap time before returning to the running total.
5.4 Finger Touch Heart Rate Meter
This watch features a sensor to measure your heart rate. For accurate readings, ensure your finger is clean and dry.
- ٽائيم ڪيپنگ موڊ مان، دٻايو موڊ until you reach the Heart Rate Monitor mode. The display may show "HR" or a similar indicator.
- Place the pad of your index finger firmly on the "FINGER TOUCH HEART RATE METER" sensor area on the watch bezel. Ensure good contact.
- Remain still and quiet. The watch will begin to detect your pulse. This may take a few seconds.
- Your heart rate in beats per minute (BPM) will be displayed.
- Remove your finger from the sensor to exit the measurement.
نوٽ: The heart rate monitor is designed for general fitness and wellness purposes. It is not a medical device and should not be used for diagnostic or treatment purposes. Factors like movement, skin condition, and environmental temperature can affect accuracy.
5.5 Pacer Function
The pacer function helps you maintain a consistent rhythm during activities. You can set a desired beat per minute (BPM) for the watch to emit an audible beep.
- ٽائيم ڪيپنگ موڊ مان، دٻايو موڊ until you reach the Pacer mode.
- کي دٻايو ۽ رکو موڊ button until the pacer BPM value begins to flash.
- استعمال ڪريو LAP/RESET button to adjust the desired pacer BPM.
- دٻايو موڊ again to confirm the setting and exit setting mode.
- To start/stop the pacer, press the سينسر button. The watch will beep at the set interval.
6. سار سنڀال
6.1 پنهنجي واچ کي صاف ڪرڻ
- گھڙي جي ڪيس ۽ پٽي کي باقاعدي طور تي نرم، ڊي سان صاف ڪريوamp ڪپڙو.
- For stubborn dirt, use a mild soap solution and rinse thoroughly with clean water. Ensure the watch is completely dry before wearing.
- Avoid using harsh chemicals or abrasive cleaners, as they can damage the watch's finish.
6.2 بيٽري مٽائڻ
The watch is powered by a product-specific battery. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
نوٽ: Improper battery replacement can compromise the watch's water resistance and void the warranty.
7. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊسپلي خالي يا مدھم آهي. | گھٽ بيٽري. | Replace the battery (refer to Section 6.2). |
| وقت غلط آهي. | Time not set correctly or watch has been reset. | Reset the time and date (refer to Section 4.1). |
| Heart rate reading is inaccurate or not appearing. | Poor finger contact, movement during measurement, or dry skin. | Ensure firm, steady contact with the sensor. Remain still. Moisten finger slightly if skin is very dry. |
| Watch functions are unresponsive. | عارضي سافٽ ويئر جي خرابي يا گهٽ بيٽري. | Try removing and reinserting the battery (if comfortable doing so, otherwise seek professional help). If issue persists, replace battery. |
8. وضاحتون
تصوير 8.1: The Timberland Washington Summit Digital Sensor Pacer Watch worn on a wrist, illustrating its size and fit.
تصوير 8.2: A visual guide comparing various watch case diameters, providing context for the watch's size.
- ماڊل نمبر: 13386JPOB_02
- ڪيس قطر: 47 x 53 ملي ميٽر
- ڪيس جو مواد: Polyurethane
- پٽي مواد: Polyurethane
- ڊسپلي جو قسم: ڊجيٽل LCD
- ڪرسٽل مواد: Mineral glass with sapphire coating
- پاڻي جي مزاحمت: 30 ميٽر (3 اي ٽي ايم / 99 فوٽ)
- افعال: Time, Date, Day, Stopwatch, Alarm, Pacer, Finger Touch Heart Rate Meter, Backlight
- بيٽري: 1 مصنوعات جي مخصوص بيٽري (شامل)
- پيڪيج جي ماپ: 10.41 x 8.38 x 8.13 سينٽي
- شيء جو وزن: 158.76 جي
9. وارنٽي ۽ سپورٽ
This Timberland watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or warranty claims, please contact Timberland customer service or an authorized service center. Contact information can typically be found on the warranty card or the official Timberland webسائيٽ.
When contacting support, please have your watch model number (13386JPOB_02) and proof of purchase readily available.
